Zedge Posted June 26, 2010 Posted June 26, 2010 Hi guys i have been on imgburn all day trying to burn just 1 Xbox game and have had no success. I have done varous things like change the layer break and write speed to 2.4. I am also using Kodak DVD + R DL Discs any help would be grateful Thanks .................. Zedge
ianymaty Posted June 26, 2010 Posted June 26, 2010 What is the real problem? Did you read the pink bit above? Give us more info, if you want us to help, stuck, error... Post a LOG
Zedge Posted June 26, 2010 Author Posted June 26, 2010 Im burning now i will post the log within 20 mins
Zedge Posted June 26, 2010 Author Posted June 26, 2010 I put the disc in my xBOX BUT WOULDNT READ I 19:47:42 ImgBurn Version 2.5.1.0 started! I 19:47:42 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 19:47:42 Total Physical Memory: 1,964,600 KB - Available: 1,349,492 KB I 19:47:42 Initialising SPTI... I 19:47:42 Searching for SCSI / ATAPI devices... I 19:47:47 -> Drive 1 - Info: ATAPI DVD A DH16A6L-C ZHCH (D:) (ATA) I 19:47:47 Found 1 DVD±RW/RAM! I 20:16:01 Operation Started! I 20:16:01 Source File: C:\Users\BoB\Desktop\cpx-nbea.dvd I 20:16:01 Source File Sectors: 3,827,488 (MODE1/2048) I 20:16:01 Source File Size: 7,838,695,424 bytes I 20:16:01 Source File Volume Identifier: DVD_ROM I 20:16:01 Source File Volume Set Identifier: ec67c000MS UDFBridge I 20:16:01 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 20:16:01 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 20:16:01 Source File File System(s): ISO9660, UDF (1.50) I 20:16:01 Destination Device: [2:0:0] ATAPI DVD A DH16A6L-C ZHCH (D:) (ATA) I 20:16:01 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 2.4x, 4x, 6x, 8x) I 20:16:01 Destination Media Sectors: 4,173,824 I 20:16:01 Write Mode: DVD I 20:16:01 Write Type: DAO I 20:16:01 Write Speed: 2.4x I 20:16:01 Link Size: Auto I 20:16:01 Lock Volume: Yes I 20:16:01 Test Mode: No I 20:16:01 OPC: No I 20:16:01 BURN-Proof: Enabled I 20:16:01 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 20:16:01 Book Type Setting: N/A I 20:16:01 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 20:16:01 User Specified L0 Data Zone Capacity: 1,913,760 I 20:22:34 Set L0 Data Zone Capacity Succeeded! I 20:22:35 Filling Buffer... (40 MB) I 20:22:36 Writing LeadIn... I 20:22:37 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 20:22:37 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 20:22:37 Writing Layer 0... (LBA: 0 - 1913759) I 20:42:20 Writing Layer 1... (LBA: 1913760 - 3827487) I 21:02:04 Synchronising Cache... I 21:02:09 Closing Track... I 21:02:14 Finalising Disc... I 21:03:08 Exporting Graph Data... I 21:03:08 Graph Data File: C:\Users\BoB\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_DVD_A_DH16A6L-C_ZHCH_26-JUNE-2010_20-16_MBIPG101-R10-65_2.4x.ibg I 21:03:08 Export Successfully Completed! I 21:03:08 Operation Successfully Completed! - Duration: 00:47:07 I 21:03:08 Average Write Rate: 3,235 KB/s (2.3x) - Maximum Write Rate: 3,346 KB/s (2.4x) I 21:03:08 Cycling Tray before Verify... W 21:03:15 Waiting for device to become ready... I 21:07:52 Abort Request Acknowledged E 21:07:52 Device Not Ready - Reason: Logical Unit is in process of becoming ready E 21:07:52 Operation Aborted!
ianymaty Posted June 26, 2010 Posted June 26, 2010 Why did you abort verify? How you know that it was a good burn?
Zedge Posted June 26, 2010 Author Posted June 26, 2010 I was waiting for 5mins and it still didnt read it so i gave up. Should i have gave it more time?
Cynthia Posted June 26, 2010 Posted June 26, 2010 Released: 2009-05-20 Version: ZHCH PLDS DH-16A6L-C firmware update improves support for recognizing dual layer media. Normally it only takes some seconds to have the disc ejected and loaded. So five minutes sounds not right. Disc ID: MBIPG101-R10-65 Not the most common media type, so it could be that the burner couldn't read the disc it just burned.
Zedge Posted June 26, 2010 Author Posted June 26, 2010 I cant do the firmware update because i upgraded to Windows 7 is there any other way of geting round this?
Cynthia Posted June 26, 2010 Posted June 26, 2010 Shouldn't be an issue to run a firmware update under Windows 7. But you don't need to do it as you already have the latest version. I 20:16:01 Destination Device: [2:0:0] ATAPI DVD A DH16A6L-C ZHCH (D:) (ATA)
Recommended Posts