Problem Burning Xbox 360 Games With IMGBURN PLZ HELP!!!!!!!!!!!

[Zedge]

Hi guys i have been on imgburn all day trying to burn just 1 Xbox game and have had no success.

I have done varous things like change the layer break and write speed to 2.4.

I am also using Kodak DVD + R DL Discs any help would be grateful

Thanks

..................

Zedge

[ianymaty]

What is the real problem? Did you read the pink bit above?

 

Give us more info, if you want us to help, stuck, error...

 

Post a LOG

[Zedge]

Im burning now i will post the log within 20 mins

[Zedge]

I put the disc in my xBOX BUT WOULDNT READ

 

I 19:47:42 ImgBurn Version 2.5.1.0 started!

I 19:47:42 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 19:47:42 Total Physical Memory: 1,964,600 KB - Available: 1,349,492 KB

I 19:47:42 Initialising SPTI...

I 19:47:42 Searching for SCSI / ATAPI devices...

I 19:47:47 -> Drive 1 - Info: ATAPI DVD A DH16A6L-C ZHCH (D:) (ATA)

I 19:47:47 Found 1 DVD±RW/RAM!

I 20:16:01 Operation Started!

I 20:16:01 Source File: C:\Users\BoB\Desktop\cpx-nbea.dvd

I 20:16:01 Source File Sectors: 3,827,488 (MODE1/2048)

I 20:16:01 Source File Size: 7,838,695,424 bytes

I 20:16:01 Source File Volume Identifier: DVD_ROM

I 20:16:01 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 20:16:01 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 20:16:01 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 20:16:01 Source File File System(s): ISO9660, UDF (1.50)

I 20:16:01 Destination Device: [2:0:0] ATAPI DVD A DH16A6L-C ZHCH (D:) (ATA)

I 20:16:01 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 2.4x, 4x, 6x, 8x)

I 20:16:01 Destination Media Sectors: 4,173,824

I 20:16:01 Write Mode: DVD

I 20:16:01 Write Type: DAO

I 20:16:01 Write Speed: 2.4x

I 20:16:01 Link Size: Auto

I 20:16:01 Lock Volume: Yes

I 20:16:01 Test Mode: No

I 20:16:01 OPC: No

I 20:16:01 BURN-Proof: Enabled

I 20:16:01 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 20:16:01 Book Type Setting: N/A

I 20:16:01 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 20:16:01 User Specified L0 Data Zone Capacity: 1,913,760

I 20:22:34 Set L0 Data Zone Capacity Succeeded!

I 20:22:35 Filling Buffer... (40 MB)

I 20:22:36 Writing LeadIn...

I 20:22:37 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 20:22:37 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 20:22:37 Writing Layer 0... (LBA: 0 - 1913759)

I 20:42:20 Writing Layer 1... (LBA: 1913760 - 3827487)

I 21:02:04 Synchronising Cache...

I 21:02:09 Closing Track...

I 21:02:14 Finalising Disc...

I 21:03:08 Exporting Graph Data...

I 21:03:08 Graph Data File: C:\Users\BoB\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_DVD_A_DH16A6L-C_ZHCH_26-JUNE-2010_20-16_MBIPG101-R10-65_2.4x.ibg

I 21:03:08 Export Successfully Completed!

I 21:03:08 Operation Successfully Completed! - Duration: 00:47:07

I 21:03:08 Average Write Rate: 3,235 KB/s (2.3x) - Maximum Write Rate: 3,346 KB/s (2.4x)

I 21:03:08 Cycling Tray before Verify...

W 21:03:15 Waiting for device to become ready...

I 21:07:52 Abort Request Acknowledged

E 21:07:52 Device Not Ready - Reason: Logical Unit is in process of becoming ready

E 21:07:52 Operation Aborted!

[ianymaty]

Why did you abort verify? How you know that it was a good burn?

[Zedge]

I was waiting for 5mins and it still didnt read it so i gave up.

Should i have gave it more time?

[Cynthia]

Released: 2009-05-20

Version: ZHCH

 

PLDS DH-16A6L-C firmware update improves support for recognizing dual layer media.

Normally it only takes some seconds to have the disc ejected and loaded. So five minutes sounds not right.

 

Disc ID: MBIPG101-R10-65

Not the most common media type, so it could be that the burner couldn't read the disc it just burned.

[mmalves]

http://forum.imgburn.com/index.php?showtopic=8000

[Zedge]

I cant do the firmware update because i upgraded to Windows 7 is there any other way of geting round this?

[Cynthia]

Shouldn't be an issue to run a firmware update under Windows 7.

 

But you don't need to do it as you already have the latest version.

 

I 20:16:01 Destination Device: [2:0:0] ATAPI DVD A DH16A6L-C ZHCH (D:) (ATA)