burnqueen83 Posted July 10, 2010 Share Posted July 10, 2010 Hello this is what my log reads: I 13:32:16 ImgBurn Version 2.5.1.0 started! I 13:32:16 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3) I 13:32:16 Total Physical Memory: 2,618,640 KB - Available: 2,163,584 KB I 13:32:16 Initialising SPTI... I 13:32:16 Searching for SCSI / ATAPI devices... I 13:32:16 -> Drive 1 - Info: SONY DVD+-RW AW-Q160S KDS3 (E:) (ATA) I 13:32:16 -> Drive 2 - Info: SONY DVD-ROM DDU1615S EDS3 (D:) (ATA) I 13:32:16 Found 1 DVD-ROM and 1 DVD±RW! I 13:33:13 Operation Started! I 13:33:13 Source File: C:\Documents and Settings\Derrick\Desktop\iso files\CONGO.iso I 13:33:13 Source File Sectors: 1,145,536 (MODE1/2048) I 13:33:13 Source File Size: 2,346,057,728 bytes I 13:33:13 Source File Volume Identifier: CONGO I 13:33:13 Source File Volume Set Identifier: 26868053 I 13:33:13 Source File Implementation Identifier: MEI I 13:33:13 Source File File System(s): ISO9660, UDF (1.02) I 13:33:13 Destination Device: [4:2:0] SONY DVD+-RW AW-Q160S KDS3 (E:) (ATA) I 13:33:13 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 6x, 8x, 12x, 16x) I 13:33:13 Destination Media Sectors: 2,297,888 I 13:33:13 Write Mode: DVD I 13:33:13 Write Type: DAO I 13:33:13 Write Speed: 8x I 13:33:13 Link Size: Auto I 13:33:13 Lock Volume: Yes I 13:33:13 Test Mode: No I 13:33:13 OPC: No I 13:33:13 BURN-Proof: Enabled I 13:33:13 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 13:33:13 Filling Buffer... (40 MB) I 13:33:14 Writing LeadIn... I 13:34:03 Writing Session 1 of 1... (1 Track, LBA: 0 - 1145535) I 13:34:03 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1145535) I 13:38:00 Synchronising Cache... W 13:38:28 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Update Failure W 13:38:28 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure W 13:38:28 Retrying (1 of 3)... I 13:38:29 Exporting Graph Data... I 13:38:29 Graph Data File: C:\Documents and Settings\Derrick\Application Data\ImgBurn\Graph Data Files\SONY_DVD+-RW_AW-Q160S_KDS3_SATURDAY-JULY-10-2010_1-33_PM_SONY16D1_8x.ibg I 13:38:29 Export Successfully Completed! I 13:38:29 Operation Successfully Completed! - Duration: 00:05:16 I 13:38:29 Average Write Rate: 9,707 KB/s (7.0x) - Maximum Write Rate: 11,290 KB/s (8.2x) I 13:38:29 Cycling Tray before Verify... W 13:38:36 Waiting for device to become ready... I used to be able to burn but cannot lately I installed a firmware for my driver Sony dvd aw q160s but still failed to burn! Help I have used a whole pack of DVDs(they ain't cheap)! Thanks again in advance. Link to comment Share on other sites More sharing options...
ianymaty Posted July 10, 2010 Share Posted July 10, 2010 http://forum.imgburn.com/index.php?showtopic=7860&st=0&p=118541&hl=+%20+'waitimmediateio&39;%20+deferred%20+error%20+&fromsearch=1&entry118541 A little search on forum would lead you to a whole thread about your problem. For short, your drive firmware has a problem, since the latest is more than 3 years old, most likely will not be another one to cure it. You could try a lens cleaning disc in that drive, other speeds available, and some Verbatim discs. If none of them resolve your problem, get a new drive. Link to comment Share on other sites More sharing options...
Recommended Posts