Have updated image birn and cannot burn a thing!

[burnqueen83]

Hello this is what my log reads:

 

I 13:32:16 ImgBurn Version 2.5.1.0 started!

I 13:32:16 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 3)

I 13:32:16 Total Physical Memory: 2,618,640 KB - Available: 2,163,584 KB

I 13:32:16 Initialising SPTI...

I 13:32:16 Searching for SCSI / ATAPI devices...

I 13:32:16 -> Drive 1 - Info: SONY DVD+-RW AW-Q160S KDS3 (E:) (ATA)

I 13:32:16 -> Drive 2 - Info: SONY DVD-ROM DDU1615S EDS3 (D:) (ATA)

I 13:32:16 Found 1 DVD-ROM and 1 DVD±RW!

I 13:33:13 Operation Started!

I 13:33:13 Source File: C:\Documents and Settings\Derrick\Desktop\iso files\CONGO.iso

I 13:33:13 Source File Sectors: 1,145,536 (MODE1/2048)

I 13:33:13 Source File Size: 2,346,057,728 bytes

I 13:33:13 Source File Volume Identifier: CONGO

I 13:33:13 Source File Volume Set Identifier: 26868053

I 13:33:13 Source File Implementation Identifier: MEI

I 13:33:13 Source File File System(s): ISO9660, UDF (1.02)

I 13:33:13 Destination Device: [4:2:0] SONY DVD+-RW AW-Q160S KDS3 (E:) (ATA)

I 13:33:13 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 6x, 8x, 12x, 16x)

I 13:33:13 Destination Media Sectors: 2,297,888

I 13:33:13 Write Mode: DVD

I 13:33:13 Write Type: DAO

I 13:33:13 Write Speed: 8x

I 13:33:13 Link Size: Auto

I 13:33:13 Lock Volume: Yes

I 13:33:13 Test Mode: No

I 13:33:13 OPC: No

I 13:33:13 BURN-Proof: Enabled

I 13:33:13 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x)

I 13:33:13 Filling Buffer... (40 MB)

I 13:33:14 Writing LeadIn...

I 13:34:03 Writing Session 1 of 1... (1 Track, LBA: 0 - 1145535)

I 13:34:03 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1145535)

I 13:38:00 Synchronising Cache...

W 13:38:28 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Update Failure

W 13:38:28 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure

W 13:38:28 Retrying (1 of 3)...

I 13:38:29 Exporting Graph Data...

I 13:38:29 Graph Data File: C:\Documents and Settings\Derrick\Application Data\ImgBurn\Graph Data Files\SONY_DVD+-RW_AW-Q160S_KDS3_SATURDAY-JULY-10-2010_1-33_PM_SONY16D1_8x.ibg

I 13:38:29 Export Successfully Completed!

I 13:38:29 Operation Successfully Completed! - Duration: 00:05:16

I 13:38:29 Average Write Rate: 9,707 KB/s (7.0x) - Maximum Write Rate: 11,290 KB/s (8.2x)

I 13:38:29 Cycling Tray before Verify...

W 13:38:36 Waiting for device to become ready...

 

I used to be able to burn but cannot lately I installed a firmware for my driver Sony dvd aw q160s but still failed to burn! Help I have used a whole pack of DVDs(they ain't cheap)! Thanks again in advance.

[ianymaty]

http://forum.imgburn.com/index.php?showtopic=7860&st=0&p=118541&hl=+%20+'waitimmediateio&39;%20+deferred%20+error%20+&fromsearch=1&entry118541

 

A little search on forum would lead you to a whole thread about your problem.

 

For short, your drive firmware has a problem, since the latest is more than 3 years old, most likely will not be another one to cure it.

 

You could try a lens cleaning disc in that drive, other speeds available, and some Verbatim discs.

 

If none of them resolve your problem, get a new drive.