Doonee Posted July 11, 2010 Posted July 11, 2010 (edited) Hi, I have been trying to burn using my Optiarc multi drive but it does not work. I always get an unsuccessful verification or a half-way burn( at both 2.4x and 4.0x). I used correct booktype, DVD from Verbatim MKM-003. I always get successful burn with my girlfriend's laptop, which is a HP multi-drive. I've read the post for burning DL DVDs posted by Lighting UK!, updated my drive firmware. I also noticed alot of HDD activity going on compared to my girlfriend's laptop during burns. The writing LeadIn time is also kind of longer (about nearly a minute before device buffer starts). I could only get 2 good burns out of 12. here is the log: I 22:22:17 ImgBurn Version 2.5.1.0 started! I 22:22:17 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 22:22:17 Total Physical Memory: 3,140,480 KB - Available: 1,781,752 KB I 22:22:18 Initialising SPTI... I 22:22:18 Searching for SCSI / ATAPI devices... I 22:22:18 -> Drive 1 - Info: Optiarc DVD+-RW AD-7580S FD06 (E:) (ATA) I 22:22:18 Found 1 DVD±RW/RAM! I 23:00:21 Operation Started! I 23:00:21 Source File: H:\Games\X360\ao2\A240DAYS\A2T40DAY.dvd I 23:00:21 Source File Sectors: 3,827,488 (MODE1/2048) I 23:00:21 Source File Size: 7,838,695,424 bytes I 23:00:22 Source File Volume Identifier: DVD_ROM I 23:00:22 Source File Volume Set Identifier: ec67c000MS UDFBridge I 23:00:22 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 23:00:22 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 23:00:22 Source File File System(s): ISO9660, UDF (1.50) I 23:00:22 Destination Device: [1:0:0] Optiarc DVD+-RW AD-7580S FD06 (E:) (ATA) I 23:00:22 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x) I 23:00:22 Destination Media Sectors: 4,173,824 I 23:00:22 Write Mode: DVD I 23:00:22 Write Type: DAO I 23:00:22 Write Speed: 4x I 23:00:22 Link Size: Auto I 23:00:22 Lock Volume: Yes I 23:00:22 Test Mode: No I 23:00:22 OPC: No I 23:00:22 BURN-Proof: Enabled I 23:00:24 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 23:00:25 Book Type Setting: N/A I 23:00:25 Optimal L0 Data Zone Capacity: 1,913,760 I 23:00:25 Optimal L0 Data Zone Method: Copied From Original Disc I 23:00:25 Set L0 Data Zone Capacity Succeeded! I 23:00:25 Filling Buffer... (40 MB) I 23:00:27 Writing LeadIn... I 23:02:03 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 23:02:03 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 23:02:03 Writing Layer 0... (LBA: 0 - 1913759) W 23:14:42 Failed to Write Sectors 1755616 - 1755647 - Reason: Write Error W 23:14:42 Retrying (1 of 20)... W 23:14:42 Retry Failed - Reason: Invalid Address For Write W 23:14:42 Retrying (2 of 20)... W 23:14:42 Retry Failed - Reason: Invalid Address For Write W 23:14:42 Retrying (3 of 20)... W 23:14:42 Retry Failed - Reason: Invalid Address For Write W 23:14:42 Retrying (4 of 20)... W 23:14:42 Retry Failed - Reason: Invalid Address For Write W 23:14:42 Retrying (5 of 20)... W 23:14:42 Retry Failed - Reason: Invalid Address For Write W 23:14:42 Retrying (6 of 20)... W 23:14:42 Retry Failed - Reason: Invalid Address For Write W 23:14:42 Retrying (7 of 20)... W 23:14:42 Retry Failed - Reason: Invalid Address For Write W 23:14:42 Retrying (8 of 20)... W 23:14:42 Retry Failed - Reason: Invalid Address For Write W 23:14:42 Retrying (9 of 20)... W 23:14:42 Retry Failed - Reason: Invalid Address For Write W 23:14:42 Retrying (10 of 20)... W 23:14:42 Retry Failed - Reason: Invalid Address For Write W 23:14:43 Retrying (11 of 20)... W 23:14:43 Retry Failed - Reason: Invalid Address For Write W 23:14:43 Retrying (12 of 20)... W 23:14:43 Retry Failed - Reason: Invalid Address For Write W 23:14:43 Retrying (13 of 20)... W 23:14:43 Retry Failed - Reason: Invalid Address For Write W 23:14:43 Retrying (14 of 20)... W 23:14:43 Retry Failed - Reason: Invalid Address For Write W 23:14:43 Retrying (15 of 20)... W 23:14:43 Retry Failed - Reason: Invalid Address For Write W 23:14:43 Retrying (16 of 20)... W 23:14:43 Retry Failed - Reason: Invalid Address For Write W 23:14:43 Retrying (17 of 20)... W 23:14:43 Retry Failed - Reason: Invalid Address For Write W 23:14:43 Retrying (18 of 20)... W 23:14:43 Retry Failed - Reason: Invalid Address For Write W 23:14:43 Retrying (19 of 20)... W 23:14:43 Retry Failed - Reason: Invalid Address For Write W 23:14:43 Retrying (20 of 20)... W 23:14:43 Retry Failed - Reason: Invalid Address For Write W 23:23:08 Retrying (21)... W 23:23:08 Retry Failed - Reason: Invalid Address For Write W 23:23:10 Retrying (22)... W 23:23:10 Retry Failed - Reason: Invalid Address For Write W 23:23:12 Retrying (23)... W 23:23:12 Retry Failed - Reason: Invalid Address For Write E 23:23:12 Failed to Write Sectors 1755616 - 1755647 - Reason: Write Error E 23:23:12 Next Writable Address: 1754980 I 23:23:13 Synchronising Cache... W 23:23:17 User opted to skip the 'Close Track/Session/Disc' functions. E 23:23:17 Failed to Write Image! I 23:23:20 Exporting Graph Data... I 23:23:20 Graph Data File: C:\Users\Doonee\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD+-RW_AD-7580S_FD06_SATURDAY-JULY-10-2010_11-00_PM_MKM-003-00_4x.ibg I 23:23:20 Export Successfully Completed! E 23:23:20 Operation Failed! - Duration: 00:22:55 I 23:23:20 Average Write Rate: 2,766 KB/s (2.0x) - Maximum Write Rate: 5,588 KB/s (4.0x) Please help me. Thank you Edited July 11, 2010 by Doonee
ianymaty Posted July 11, 2010 Posted July 11, 2010 I 23:00:22 Destination Device: [1:0:0] Optiarc DVD+-RW AD-7580S FD06 (E:) (ATA)I 23:00:22 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x) You have the best media you can get and it is rated at 8x but your drive can burn it only at 2.x and 4x. That's not good. Try what Cynthia said and also try the other speed 2.4x since 4x can't do the job done right
ianymaty Posted July 11, 2010 Posted July 11, 2010 Oh, it was stated in the first line, I must overlooked that part... Still, something is not right with that drive...
Doonee Posted July 11, 2010 Author Posted July 11, 2010 (edited) I have not gotten to the cleaning disc part yet. But I have a hunch that the problem lies in my drive. So, I went out and tried to get an Pioneer and Asus external burner(USB connection. However, I got the Sephamore timeout has expired or something like that. There were no cure for that. Is there nay suggestion for a good consistent external burner? I'm using a lappy so my choice is limited to USB #39;(. An one more thing, my drive used NuTech firmware instead of NEC. I got Invalid command operation Code error when I used NEC tab in booktype. Editted: I just bought a Sony Optiarc AD-7240S and stuck it in an external enclosure. Worked like a charm. Guess the problem lies in my drive. Laptop burners are kinda shady. Edited July 16, 2010 by Doonee
Recommended Posts