Koota Posted July 12, 2010 Share Posted July 12, 2010 Hey, im new registered here, but ive been reading these forums for a while, i got a HL-DT-ST DVDRRW GSA-4166B 1.02 (E:) (ATA) Heres the log Im using verbatim dl+r dvds I appreciate you taking time to help me ImgBurn2.log Link to comment Share on other sites More sharing options...
mmalves Posted July 12, 2010 Share Posted July 12, 2010 I 13:47:58 Destination Device: [0:1:0] HL-DT-ST DVDRRW GSA-4166B 1.02 (E:) (ATA)I 13:47:58 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x) I 13:47:58 Write Speed: 2.4x Try burning at 6x or 8x with a brand new blank disc. You might also want to try cleaning the drive with a lens cleaning disc. If none of that solves your problem then you'll need to get a new burner (it's cheaper than a 10-pack of Verbatim blanks). Link to comment Share on other sites More sharing options...
Koota Posted July 12, 2010 Author Share Posted July 12, 2010 (edited) I 13:47:58 Destination Device: [0:1:0] HL-DT-ST DVDRRW GSA-4166B 1.02 (E:) (ATA)I 13:47:58 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x) I 13:47:58 Write Speed: 2.4x Try burning at 6x or 8x with a brand new blank disc. You might also want to try cleaning the drive with a lens cleaning disc. If none of that solves your problem then you'll need to get a new burner (it's cheaper than a 10-pack of Verbatim blanks). The thing is, i used to always burn with 2,4 or AWS, nevveer had this problem before, gonna put up a error message. EDIT!!! I just tried with a brand new DVD and at 50% it came up some spindle servo error, pic in a sec PIC! http://img22.imageshack.us/img22/6521/10849756.jpg Edited July 12, 2010 by Koota Link to comment Share on other sites More sharing options...
Koota Posted July 12, 2010 Author Share Posted July 12, 2010 I 13:47:58 Destination Device: [0:1:0] HL-DT-ST DVDRRW GSA-4166B 1.02 (E:) (ATA)I 13:47:58 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x) I 13:47:58 Write Speed: 2.4x Try burning at 6x or 8x with a brand new blank disc. You might also want to try cleaning the drive with a lens cleaning disc. If none of that solves your problem then you'll need to get a new burner (it's cheaper than a 10-pack of Verbatim blanks). The thing is, i used to always burn with 2,4 or AWS, nevveer had this problem before, gonna put up a error message. EDIT!!! I just tried with a brand new DVD and at 50% it came up some spindle servo error, pic in a sec PIC! http://img22.imageshack.us/img22/6521/10849756.jpg Please, anyone out there that can help me? Link to comment Share on other sites More sharing options...
mmalves Posted July 12, 2010 Share Posted July 12, 2010 Try the lens cleaning disc and burning faster, that's 8x rated media after all. Link to comment Share on other sites More sharing options...
Recommended Posts