Disc burning error

[sancho1983]

Hi, i'm trying to burn an xbox360 image, using the .dvd file, I'm using Verbatim 8x DVD+R DL but it hasn't worked.

 

Here is the log

 

I 19:06:31 ImgBurn Version 2.5.0.0 started!

I 19:06:31 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600)

I 19:06:31 Total Physical Memory: 1,964,600 KB - Available: 846,176 KB

I 19:06:31 Initialising SPTI...

I 19:06:31 Searching for SCSI / ATAPI devices...

I 19:06:31 Found 1 DVD±RW!

I 19:07:27 Operation Started!

I 19:07:27 Source File: E:\Media\Downloads\red dead redemption.dvd

I 19:07:27 Source File Sectors: 3,827,488 (MODE1/2048)

I 19:07:27 Source File Size: 7,838,695,424 bytes

I 19:07:27 Source File Volume Identifier: DVD_ROM

I 19:07:27 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 19:07:27 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 19:07:27 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 19:07:27 Source File File System(s): ISO9660, UDF (1.50)

I 19:07:27 Destination Device: [2:0:0] _NEC DVD_RW ND-3550A 1.52 (D:) (ATA)

I 19:07:27 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 19:07:27 Destination Media Sectors: 4,173,824

I 19:07:27 Write Mode: DVD

I 19:07:27 Write Type: DAO

I 19:07:27 Write Speed: 4x

I 19:07:27 Link Size: Auto

I 19:07:27 Lock Volume: Yes

I 19:07:27 Test Mode: No

I 19:07:27 OPC: No

I 19:07:27 BURN-Proof: Enabled

I 19:07:27 Book Type Setting: DVD-ROM

I 19:07:27 Optimal L0 Data Zone Capacity: 1,913,760

I 19:07:27 Optimal L0 Data Zone Method: Copied From Original Disc

I 19:07:56 Set L0 Data Zone Capacity Succeeded!

I 19:07:59 Filling Buffer... (40 MB)

I 19:08:00 Writing LeadIn...

I 19:08:01 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 19:08:01 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 19:08:01 Writing Layer 0... (LBA: 0 - 1913759)

I 19:19:34 Writing Layer 1... (LBA: 1913760 - 3827487)

I 19:31:39 Synchronising Cache...

I 19:31:40 Closing Track...

I 19:32:02 Finalising Disc...

I 19:32:35 Exporting Graph Data...

I 19:32:35 Graph Data File: C:\Users\Barnaby\AppData\Roaming\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-3550A_1.52_16-JULY-2010_19-07_MKM-003-00_4x.ibg

I 19:32:35 Export Successfully Completed!

I 19:32:35 Operation Successfully Completed! - Duration: 00:25:07

I 19:32:35 Average Write Rate: 5,402 KB/s (3.9x) - Maximum Write Rate: 5,766 KB/s (4.2x)

I 19:32:35 Cycling Tray before Verify...

I 19:33:05 Device Ready!

I 19:33:06 Operation Started!

I 19:33:06 Source Device: [2:0:0] _NEC DVD_RW ND-3550A 1.52 (D:) (ATA)

I 19:33:06 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 19:33:06 Image File: E:\Media\Downloads\red dead redemption.dvd

I 19:33:06 Image File Sectors: 3,827,488 (MODE1/2048)

I 19:33:06 Image File Size: 7,838,695,424 bytes

I 19:33:06 Image File Volume Identifier: DVD_ROM

I 19:33:06 Image File Volume Set Identifier: ec67c000MS UDFBridge

I 19:33:06 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 19:33:06 Image File Implementation Identifier: Microsoft CDIMAGE UDF

I 19:33:06 Image File File System(s): ISO9660, UDF (1.50)

I 19:33:06 Read Speed (Data/Audio): MAX / MAX

E 19:33:06 Session 1, Track 1 is smaller on the disc than it is in the image file.

E 19:33:06 Disc's Track Sectors: 0 (TOC Sectors: 0)

E 19:33:06 Image File's Track Sectors: 3827488 (TOC Sectors: 3827488)

E 19:33:06 Operation Failed! - Duration: 00:00:00

I 19:33:06 Average Verify Rate: N/A - Maximum Verify Rate: N/A

 

Thanks if anyone can offer any advice

[mmalves]

Have you tried burning at 6x or 8x? Tried a lens cleaning disc on that burner? Where did you get that firmware version?

 

On another note, you could try verifying that disc with another drive.

[sancho1983]

Have you tried burning at 6x or 8x? Tried a lens cleaning disc on that burner? Where did you get that firmware version?

 

On another note, you could try verifying that disc with another drive.

 

Thanks for swift reply!

 

It's the first time I've tried it. It's also a drive I inherited from my mother in law with her case, so don't know much about it. I presume its the latest firmware as win7 only 'installed' it a couple if days ago

 

Don't want to try too many times, the discs are expensive! Do you think 6x or 8x would be best?

[mmalves]

Burning at 6x or 8x and using the lens cleaning disc is pretty much all you can do to make it work, short of buying a new burner.

[sancho1983]

Burning at 6x or 8x and using the lens cleaning disc is pretty much all you can do to make it work, short of buying a new burner.

 

Ok, thanks. Ive got an old burner that i might try with it, was just easier to leave this one in the case when i changed it!!

 

E-buyer have one for £12 delivered so i might just buy a new one

 

Thanks again