Jimbo Posted July 20, 2010 Posted July 20, 2010 I had a failure with the following burn. Any advice would be appreciated. ImgBurn Version 2.5.1.0 - Log ; Tuesday, 20 July 2010, 14:41:10 ; \\****************************************// ; ; I 14:30:54 ImgBurn Version 2.5.1.0 started! I 14:30:54 Microsoft Windows 7 Home Premium Edition (6.1, Build 7600) I 14:30:54 Total Physical Memory: 1,834,488 KB - Available: 1,131,252 KB W 14:30:54 Drive N:\ (FAT32) does not support single files > 4 GB in size. I 14:30:54 Initialising SPTI... I 14:30:54 Searching for SCSI / ATAPI devices... I 14:30:54 -> Drive 1 - Info: ATAPI iHAS424 A ZL1P (E:) (ATA) I 14:30:54 -> Drive 2 - Info: Optiarc DVD RW AD-7241S 1.03 (F:) (ATA) I 14:30:54 -> Drive 3 - Info: ATAPI iHOS104 WL0B (L:) (USB) I 14:30:54 Found 2 DVD±RW/RAMs and 1 BD-ROM! I 14:30:54 Operation Started! I 14:30:54 Source File: M:\UNTHINKABLE.MDS I 14:30:54 Source File Sectors: 2,285,836 (MODE1/2048) I 14:30:54 Source File Size: 4,681,392,128 bytes I 14:30:54 Source File Volume Identifier: UNTHINKABLE I 14:30:54 Source File Volume Set Identifier: 22B58DE3DVDSHRNK I 14:30:54 Source File Implementation Identifier: DVD Shrink I 14:30:54 Source File File System(s): ISO9660, UDF (1.02) I 14:30:54 Destination Device: [1:0:0] ATAPI iHAS424 A ZL1P (E:) (ATA) I 14:30:54 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 6x, 8x, 12x, 16x) I 14:30:54 Destination Media Sectors: 2,297,888 I 14:30:54 Write Mode: DVD I 14:30:54 Write Type: DAO I 14:30:54 Write Speed: 8x I 14:30:54 Link Size: Auto I 14:30:54 Lock Volume: Yes I 14:30:54 Test Mode: No I 14:30:54 OPC: No I 14:30:54 BURN-Proof: Enabled I 14:30:54 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 14:30:54 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 14:30:55 Filling Buffer... (40 MB) I 14:30:57 Writing LeadIn... W 14:32:02 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full W 14:32:02 Retrying (1 of 20)... W 14:33:08 Retry Failed - Reason: Power Calibration Area Is Full W 14:33:08 Retrying (2 of 20)... W 14:34:14 Retry Failed - Reason: Power Calibration Area Is Full W 14:34:14 Retrying (3 of 20)... W 14:35:20 Retry Failed - Reason: Power Calibration Area Is Full W 14:35:20 Retrying (4 of 20)... W 14:36:25 Retry Failed - Reason: Power Calibration Area Is Full W 14:36:25 Retrying (5 of 20)... W 14:37:29 Retry Failed - Reason: Power Calibration Area Is Full W 14:37:29 Retrying (6 of 20)... W 14:38:35 Retry Failed - Reason: Power Calibration Area Is Full W 14:38:35 Retrying (7 of 20)... W 14:39:41 Retry Failed - Reason: Power Calibration Area Is Full W 14:39:41 Retrying (8 of 20)... I 14:40:44 Abort Request Acknowledged W 14:40:45 Retry Failed - Reason: Power Calibration Area Is Full E 14:40:45 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full I 14:40:45 Synchronising Cache... W 14:40:51 User opted to skip the 'Close Track/Session/Disc' functions. E 14:40:51 Failed to Write Image! E 14:40:51 Operation Aborted! - Duration: 00:09:56 I 14:40:51 Average Write Rate: N/A - Maximum Write Rate: N/A I 14:41:10 Close Request Acknowledged I 14:41:10 Closing Down... I 14:41:10 Shutting down SPTI... I 14:41:10 ImgBurn closed!
ianymaty Posted July 20, 2010 Posted July 20, 2010 Try a lens cleaning disc in that drive Try other speeds available Try other media, Verbatim are recommanded.
Recommended Posts