pjlillington Posted July 22, 2010 Posted July 22, 2010 Has anybody tried to create a W2K8 R2 bootable disk using Imgburn? I've tried to create a disk using the Win 7 bootable instructions, thinking it may be a similar procedure - http://forum.imgburn.com/index.php?showtopic=11194 However, no joy - I receive CDBOOT: Cannot boot from CD - Code: 5. Thanks, Peter
mmalves Posted July 22, 2010 Posted July 22, 2010 Please post the log from when you built/burned your disc.
pjlillington Posted July 22, 2010 Author Posted July 22, 2010 Please post the log from when you built/burned your disc. I orginally did not have a log - so I have recreated the burn and logged it (I will not be able to verify that this new disk does not boot until tomorrow). The only difference between the original burn and this one was the volume label syntax - this one is identical to the instructions (I'm not sure if that is significant). NB: I previously successfully used the above guide to create a bootable Win7 disk. Peter I 14:14:12 ImgBurn Version 2.5.0.0 started! I 14:14:12 Microsoft Windows 7 Enterprise Edition (6.1, Build 7600) I 14:14:12 Total Physical Memory: 3,667,936 KB - Available: 1,622,532 KB I 14:14:43 Initialising SPTI... I 14:14:43 Searching for SCSI / ATAPI devices... I 14:14:45 Found 1 DVD±RW! I 14:16:09 Operation Started! I 14:16:09 Building Image Tree... I 14:16:46 Checking Directory Depth... I 14:16:46 Calculating Totals... I 14:16:46 Preparing Image... I 14:16:48 Checking Path Length... I 14:16:48 Contents: 994 Files, 327 Folders I 14:16:48 Content Type: Operating System Installation I 14:16:48 Data Type: MODE1/2048 I 14:16:48 File System(s): UDF (1.02) (Bootable) I 14:16:48 Volume Label: GRMCULFRER_EN_DVD I 14:16:48 Size: 3,019,579,341 bytes I 14:16:48 Sectors: 1,474,831 I 14:16:48 Image Size: 3,024,453,632 bytes I 14:16:48 Image Sectors: 1,476,784 I 14:16:59 Operation Successfully Completed! - Duration: 00:00:50 I 14:16:59 Operation Started! I 14:16:59 Source File: -==/\/[bUILD IMAGE]\/\==- I 14:16:59 Source File Sectors: 1,476,784 (MODE1/2048) I 14:16:59 Source File Size: 3,024,453,632 bytes I 14:16:59 Source File Volume Identifier: GRMCULFRER_EN_DVD I 14:16:59 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 14:16:59 Source File Implementation Identifier: ImgBurn I 14:16:59 Source File File System(s): ISO9660 (Bootable), UDF (1.02) I 14:16:59 Destination Device: [1:0:0] TSSTcorp DVD+-RW TS-L632H D300 (E:) (ATA) I 14:16:59 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 3x, 4x, 6x, 8x) I 14:16:59 Destination Media Sectors: 2,295,104 I 14:16:59 Write Mode: DVD I 14:16:59 Write Type: DAO I 14:16:59 Write Speed: MAX I 14:16:59 DVD+R Reserve Track: No I 14:16:59 Link Size: Auto I 14:16:59 Lock Volume: Yes I 14:16:59 Test Mode: No I 14:16:59 OPC: No I 14:16:59 BURN-Proof: Enabled I 14:17:01 Book Type Setting: DVD-ROM I 14:17:02 Filling Buffer... (40 MB) I 14:17:04 Writing LeadIn... I 14:17:18 Writing Session 1 of 1... (1 Track, LBA: 0 - 1476783) I 14:17:18 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1476783) I 14:24:34 Synchronising Cache... I 14:24:37 Closing Track... I 14:24:40 Finalising Disc... I 14:24:56 Exporting Graph Data... I 14:24:56 Graph Data File: C:\Users\plillington\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_DVD+-RW_TS-L632H_D300_JULY-22-10_2-16_PM_CMC_MAG-M01-00_MAX.ibg I 14:24:56 Export Successfully Completed! I 14:24:56 Operation Successfully Completed! - Duration: 00:07:57 I 14:24:56 Average Write Rate: 6,789 KB/s (4.9x) - Maximum Write Rate: 9,487 KB/s (6.8x) I 14:24:56 Cycling Tray before Verify... W 14:25:19 Waiting for device to become ready... I 14:25:22 Device Ready! I 14:25:24 Operation Started! I 14:25:24 Source Device: [1:0:0] TSSTcorp DVD+-RW TS-L632H D300 (E:) (ATA) I 14:25:24 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: CMC MAG-M01-00) (Speeds: 3x, 4x, 6x, 8x) I 14:25:24 Image File: -==/\/[bUILD IMAGE]\/\==- I 14:25:24 Image File Sectors: 1,476,784 (MODE1/2048) I 14:25:24 Image File Size: 3,024,453,632 bytes I 14:25:24 Image File Volume Identifier: GRMCULFRER_EN_DVD I 14:25:24 Image File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 14:25:24 Image File Implementation Identifier: ImgBurn I 14:25:24 Image File File System(s): ISO9660 (Bootable), UDF (1.02) I 14:25:24 Read Speed (Data/Audio): MAX / MAX I 14:25:24 Verifying Session 1 of 1... (1 Track, LBA: 0 - 1476783) I 14:25:24 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 1476783) I 14:32:25 Exporting Graph Data... I 14:32:25 Graph Data File: C:\Users\plillington\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_DVD+-RW_TS-L632H_D300_JULY-22-10_2-16_PM_CMC_MAG-M01-00_MAX.ibg I 14:32:25 Export Successfully Completed! I 14:32:25 Operation Successfully Completed! - Duration: 00:07:00 I 14:32:25 Average Verify Rate: 7,032 KB/s (5.1x) - Maximum Verify Rate: 9,607 KB/s (6.9x)
pjlillington Posted July 23, 2010 Author Posted July 23, 2010 Please post the log from when you built/burned your disc. I orginally did not have a log - so I have recreated the burn and logged it (I will not be able to verify that this new disk does not boot until tomorrow). The only difference between the original burn and this one was the volume label syntax - this one is identical to the instructions (I'm not sure if that is significant). NB: I previously successfully used the above guide to create a bootable Win7 disk. Peter Never mind - turns out this new disk DOES boot. I guess the volume label is all important, lesson learned.
Recommended Posts