Guitargler Posted August 3, 2010 Share Posted August 3, 2010 My error box reads I/O Error! Device: [1:0:0] PLEXTOR DVDR PX-716A 1.05(Q:)(ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 00 20 00 00 20 00 Interpretation: Write (10)-Sectors: 32-63 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00 Interpretation:Invalid Address For Write And after clicking "Cancel" and then telling it not to close the disc, the entire log reads I 21:19:15 Operation Started! I 21:19:15 Source File: M:\RB2\qf-rb2.iso I 21:19:15 Source File Sectors: 2,294,912 (MODE1/2048) I 21:19:15 Source File Size: 4,699,979,776 bytes I 21:19:15 Source File Volume Identifier: Rock Band 2 I 21:19:15 Source File File System(s): Special I 21:19:15 Destination Device: [1:0:0] PLEXTOR DVDR PX-716A 1.05 (Q:) (ATA) I 21:19:15 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x, 6x, 8x, 12x, 16x) I 21:19:15 Destination Media Sectors: 2,298,496 I 21:19:15 Write Mode: DVD I 21:19:15 Write Type: DAO I 21:19:15 Write Speed: MAX I 21:19:15 Link Size: Auto I 21:19:15 Lock Volume: Yes I 21:19:15 Test Mode: No I 21:19:15 OPC: No I 21:19:15 BURN-Proof: Enabled I 21:19:15 Write Speed Successfully Set! - Effective: 22,160 KB/s (16x) I 21:19:15 Advanced Settings - AutoStrategy: Auto, PowerRec: Yes I 21:19:15 Filling Buffer... (40 MB) I 21:19:16 Writing LeadIn... W 21:19:38 Potential 'ReadBufferCapacity' Deferred Error - Power Calibration Area Error W 21:19:38 Failed to Write Sectors 32 - 63 - Reason: Invalid Address For Write W 21:19:38 Retrying (1 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (2 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (3 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (4 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (5 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (6 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (7 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (8 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (9 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (10 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (11 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (12 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (13 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (14 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (15 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (16 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (17 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (18 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (19 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write W 21:19:38 Retrying (20 of 20)... W 21:19:38 Retry Failed - Reason: Invalid Address For Write E 21:22:57 Failed to Write Sectors 32 - 63 - Reason: Invalid Address For Write E 21:22:57 Next Writable Address: 0 I 21:22:57 Synchronising Cache... W 21:23:02 User opted to skip the 'Close Track/Session/Disc' functions. E 21:23:02 Failed to Write Image! E 21:23:02 Operation Failed! - Duration: 00:03:46 I 21:23:02 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) Does anyone know what I can do to fix this? The other drive on my computer is only CD-R, and the laptop burns DVDs but at a ridiculously slow pace (though it used to only take about 15 minutes, now it's around an hour and a half). Link to comment Share on other sites More sharing options...
mmalves Posted August 3, 2010 Share Posted August 3, 2010 I 21:19:15 Destination Device: [1:0:0] PLEXTOR DVDR PX-716A 1.05 (Q:) (ATA) Update your burner's firmware and try again at 8x or 12x for possibly better quality burns. As for the slow burning on the laptop, please read the 2nd post from the FAQ thread (link in the pink box up top). Link to comment Share on other sites More sharing options...
Recommended Posts