Jump to content

Recommended Posts

Posted

I've used Nero for years (I currently have the latest version...after upgrading after the last time I tried to use ImgBurn causing this same issue).

 

When I install ImgBurn and try to burn a BD-R image, it fails (see below). Then, when I try to go back to using Nero Burning ROM, it fails as well. Last time I had to wipe my computer clean and re-install Nero (and I think the entire OS), to be able to burn again.

 

It's been a while...I forgot what I'd done...and I just did it again. I re-installed ImgBurn to see if it would improve BD-R compatibility on an early (1.0) Blu-Ray player. Failed. I've uninstalled ImgBurn, rebooted, but Nero ROM still won't burn. It worked fine immediately before installing ImgBurn.

 

My LG burner has the latest firmware. I even re-installed it...just like I remember doing the first time I tried ImgBurn with the same results.

 

It's not the media. The failure happens on TY DVD-R and Ritek BD-R...both of which I never have any coasters with on Nero. ImgBurn just has such a good reputation...I got drawn in again.

 

 

Any ideas about a conflict with Nero? Thanks!

 

It seems to fail when writing the Lead-In:

 

 

I 11:01:15 ImgBurn Version 2.5.1.0 started!

I 11:01:15 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 11:01:15 Total Physical Memory: 3,668,396 KB - Available: 3,177,128 KB

I 11:01:15 Initialising SPTI...

I 11:01:15 Searching for SCSI / ATAPI devices...

I 11:01:16 -> Drive 1 - Info: HL-DT-ST BD-RE GGW-H20L YL05 (J:) (ATA)

I 11:01:16 Found 1 HD DVD-ROM/BD-RE!

I 11:04:42 Operation Started!

I 11:04:42 Source File: D:\073110\073110 BD Prepare\073110 Wedding AVC BD.iso

I 11:04:42 Source File Sectors: 3,981,216 (MODE1/2048)

I 11:04:42 Source File Size: 8,153,530,368 bytes

I 11:04:42 Source File Volume Identifier: VOLUME_01

I 11:04:42 Source File Volume Set Identifier: AAAABBBBCCCCDDDDEEEEFFFF

I 11:04:42 Source File Application Identifier: DVD Architect Pro

I 11:04:42 Source File Implementation Identifier: 0

I 11:04:42 Source File File System(s): UDF (2.50)

I 11:04:42 Destination Device: [4:0:0] HL-DT-ST BD-RE GGW-H20L YL05 (J:) (ATA)

I 11:04:42 Destination Media Type: BD-R (Disc ID: RITEK-BR2-00) (Speeds: 2x, 4x)

I 11:04:42 Destination Media Sectors: 12,219,392

I 11:04:42 Write Mode: BD

I 11:04:42 Write Type: DAO

I 11:04:42 Write Speed: MAX

I 11:04:42 BD-R Verify Not Required: Yes

I 11:04:42 Link Size: Auto

I 11:04:42 Lock Volume: Yes

I 11:04:42 Test Mode: No

I 11:04:42 OPC: No

I 11:04:42 BURN-Proof: Enabled

I 11:04:42 Write Speed Successfully Set! - Effective: 17,982 KB/s (4x)

I 11:20:56 Filling Buffer... (40 MB)

I 11:20:57 Writing LeadIn...

W 11:23:33 Failed to Write Sectors 1152 - 1183 - Reason: Write Error

W 11:23:33 Retrying (1 of 20)...

W 11:23:33 Retry Failed - Reason: Write Error

W 11:23:33 Retrying (2 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (3 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (4 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (5 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (6 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (7 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (8 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (9 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (10 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (11 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (12 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (13 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (14 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (15 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (16 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (17 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (18 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (19 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

W 11:23:33 Retrying (20 of 20)...

W 11:23:33 Retry Failed - Reason: Invalid Address For Write

E 11:25:47 Failed to Write Sectors 1152 - 1183 - Reason: Write Error

E 11:25:47 Next Writable Address: 0

I 11:25:47 Synchronising Cache...

W 11:25:48 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error

W 11:25:48 Synchronise Cache Failed! - Reason: Write Error

W 11:25:48 Retrying (1 of 3)...

W 11:25:50 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error

W 11:25:50 Retry Failed - Reason: Write Error

W 11:25:50 Retrying (2 of 3)...

W 11:25:51 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error

W 11:25:51 Retry Failed - Reason: Write Error

W 11:25:51 Retrying (3 of 3)...

W 11:25:52 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Write Error

W 11:25:52 Retry Failed - Reason: Write Error

I 11:26:41 Closing Track...

W 11:26:41 Close Track Failed! - Reason: Cannot Write Medium - Incompatible Format

W 11:26:41 Retrying (1 of 3)...

W 11:26:41 Retry Failed - Reason: Cannot Write Medium - Incompatible Format

W 11:26:41 Retrying (2 of 3)...

W 11:26:41 Retry Failed - Reason: Cannot Write Medium - Incompatible Format

W 11:26:41 Retrying (3 of 3)...

W 11:26:41 Retry Failed - Reason: Cannot Write Medium - Incompatible Format

I 11:26:43 Finalising Disc...

W 11:26:43 Finalise Disc Failed! - Reason: Cannot Write Medium - Incompatible Format

W 11:26:43 Retrying (1 of 3)...

W 11:26:43 Retry Failed - Reason: Cannot Write Medium - Incompatible Format

W 11:26:43 Retrying (2 of 3)...

W 11:26:43 Retry Failed - Reason: Cannot Write Medium - Incompatible Format

W 11:26:43 Retrying (3 of 3)...

W 11:26:43 Retry Failed - Reason: Cannot Write Medium - Incompatible Format

E 11:26:58 Failed to Write Image!

E 11:26:58 Operation Failed! - Duration: 00:22:16

I 11:26:58 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)

Posted
I 11:04:42 Destination Media Type: BD-R (Disc ID: RITEK-BR2-00) (Speeds: 2x, 4x)

I would suspect the media as the issue.

 

If you try to burn a Verbatim, does that work?

Posted (edited)
I 11:04:42 Destination Media Type: BD-R (Disc ID: RITEK-BR2-00) (Speeds: 2x, 4x)

I would suspect the media as the issue.

 

If you try to burn a Verbatim, does that work?

 

 

Thanks Cynthia.

 

No, I haven't tried Verbatim BD-R. I had terrible luck with Verbatim DVD-R compatibility years ago, and haven't bothered with them since...only TY DVD-R.

 

The Ritek BD-R I'm using burn with zero problems using Nero, so I guess it's just a case of trying to fix something that isn't broke...I should just keep using Nero. :D

 

After installing ImgBurn, the only way I can get my burner to start working again with Nero, is to uninstall ImgBurn, turn off computer, remove power plug from internal burner, restart computer, turn off computer, plug power back into burner, start computer. Then Nero works fine again. Very strange....that's why I figured trying to install Nero and ImgBurn on the same computer has some obvious conflict.

Edited by Swyzlstyx
Posted

It sounds very odd as ImgBurn doesn't install any drivers and/or mess around with Nero that would make it go banana when you burn after the installation of ImgBurn. :(

 

In my ears it sounds more as the discs could be a bit of hit and miss and therefore it looks like ImgBurn is messing up your system.

 

Edit:

 

The failure happens on TY DVD-R

Sounds even more odd that those discs should be a hit and miss when you get problems after the installation of ImgBurn.

Posted

It sounds very odd as ImgBurn doesn't install any drivers and/or mess around with Nero that would make it go banana when you burn after the installation of ImgBurn. :(

 

In my ears it sounds more as the discs could be a bit of hit and miss and therefore it looks like ImgBurn is messing up your system.

 

Edit:

 

The failure happens on TY DVD-R

Sounds even more odd that those discs should be a hit and miss when you get problems after the installation of ImgBurn.

 

Stranger is that the exact same discs...TY DVD-R and Ritek BD-R....and I tried 2-3 of each...all failed when attempting to burn the lead-in...were STILL able to successfully be burned with Nero after getting it working again. So it failed before burning anything at all...the discs were still perfectly good. I'm not a real computer wiz...it's over my head. :D

Posted

I guess your Nero is using the same Windows SPTI as ImgBurn?

 

NT-SPTI used

You should see this in the Nero log.

 

You have anything "odd" in the filter driver list?

 

Main Menu -> Tools -> Filter Driver Load Order (you can copy a text file from that function in here)

 

Using the same write speed in both programs?

 

I 11:04:42 Write Speed: MAX

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.