ryangambrill Posted August 16, 2010 Posted August 16, 2010 Current Drive - HL-DT-ST DVD+-RW GWA4164B E113 (ATA) Brand identified as LG http://club.myce.com/f91/lg-4164-inside-dell-155355/ Media is DVD+R DL Vetbatim When I choose either option in "Change For" (Currently DVD+R or DVD+R DL) I get Unknown (Failed!). Reason: Invalid Command Operation Code I need to change to DVD-ROM. Details: HL-DT-ST DVD+-RW GWA4164B E113 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty State of Last Session: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Next Writable Address: 0 Supported Write Speeds: 4x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes Physical Format Information (ADIP - L0): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (ADIP - L1): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L0): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded - L1): Disc ID: MKM-001-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 11,080 KB/s (8x) - WS: 5,540 KB/s (4x)
mmalves Posted August 16, 2010 Posted August 16, 2010 The burner should automatically booktype DVD+R DL media to DVD-ROM by itself. You do know that the booktype is written on the disc only when you actually burn it, right? Make sure you have Verify enabled and you'll see the booktype in the Log window when it starts verifying the disc.
ryangambrill Posted August 16, 2010 Author Posted August 16, 2010 Yes, was aware that book type will apply to the disc that is being written. I was following these instructions. http://stevejenkins.com/blog/2010/07/how-to-backup-your-navigation-dvd-cd/ So do not worry about that step and just burn to the disc?
ryangambrill Posted August 16, 2010 Author Posted August 16, 2010 Yes. I just burned and tested two disc's. A dual layer DVD and single layer. Both gave error DVD Incompatible when placed in Nav system. How do I double check to make sure the discs that were burned, were burned as DVD-ROM?
mmalves Posted August 17, 2010 Posted August 17, 2010 Make sure you have Verify enabled and you'll see the booktype in the Log window when it starts verifying the disc.
Recommended Posts