Problem - Change Book Type

[ryangambrill]

Current Drive - HL-DT-ST DVD+-RW GWA4164B E113 (ATA)

 

Brand identified as LG http://club.myce.com/f91/lg-4164-inside-dell-155355/

 

Media is DVD+R DL Vetbatim

 

When I choose either option in "Change For" (Currently DVD+R or DVD+R DL)

 

I get Unknown (Failed!). Reason: Invalid Command Operation Code

 

I need to change to DVD-ROM.

 

 

 

Details:

 

HL-DT-ST DVD+-RW GWA4164B E113 (ATA)

Current Profile: DVD+R DL

 

Disc Information:

Status: Empty

State of Last Session: Empty

Erasable: No

Free Sectors: 4,173,824

Free Space: 8,547,991,552 bytes

Free Time: 927:32:74 (MM:SS:FF)

Next Writable Address: 0

Supported Write Speeds: 4x

 

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 2,086,912

Changeable: Yes

 

Physical Format Information (ADIP - L0):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (ADIP - L1):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L0):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Physical Format Information (Last Recorded - L1):

Disc ID: MKM-001-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 16,580,607

Last Physical Sector in Layer 0: 2,283,519

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 0 (0x00000000)

-> RS: 11,080 KB/s (8x) - WS: 5,540 KB/s (4x)

[mmalves]

The burner should automatically booktype DVD+R DL media to DVD-ROM by itself. You do know that the booktype is written on the disc only when you actually burn it, right? Make sure you have Verify enabled and you'll see the booktype in the Log window when it starts verifying the disc.

[ryangambrill]

Yes, was aware that book type will apply to the disc that is being written.

 

I was following these instructions.

 

http://stevejenkins.com/blog/2010/07/how-to-backup-your-navigation-dvd-cd/

 

So do not worry about that step and just burn to the disc?

[mmalves]

Yes.

[ryangambrill]

Yes.

 

I just burned and tested two disc's. A dual layer DVD and single layer. Both gave error DVD Incompatible when placed in Nav system.

 

How do I double check to make sure the discs that were burned, were burned as DVD-ROM?

[mmalves]

Make sure you have Verify enabled and you'll see the booktype in the Log window when it starts verifying the disc.