cowboyup6983 Posted August 22, 2010 Posted August 22, 2010 (edited) I don't understand this at all. I tried to burn with ImgBurn and then with ConvertXtoDVD, both failed. Could it be more source? I'm trying to backup my disc. Attached is my log, please if you need something else, ask. The media is 2nd class, but a simple answer of getting better media will not do, I've used several of them with same burner and the same method of backing up. I 16:48:55 ImgBurn Version 2.5.1.0 started! I 16:48:55 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 16:48:55 Total Physical Memory: 2,095,952 KB - Available: 1,367,364 KB I 16:48:55 Initialising SPTI... I 16:48:55 Searching for SCSI / ATAPI devices... I 16:48:55 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (E:) (SCSI) I 16:48:56 -> Drive 2 - Info: Optiarc DVD RW AD-7191S 1.02 (D:) (RAID) I 16:48:56 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 16:49:16 Operation Started! I 16:49:16 Source File: C:\Users\Desktop\The Last Song.iso I 16:49:16 Source File Sectors: 2,202,144 (MODE1/2048) I 16:49:16 Source File Size: 4,509,990,912 bytes I 16:49:16 Source File Volume Identifier: The Last Song I 16:49:16 Source File Volume Set Identifier: 3D16A536________The Last Song I 16:49:16 Source File Implementation Identifier: VsoSoftware I 16:49:16 Source File File System(s): ISO9660, UDF (1.02) I 16:49:16 Destination Device: [4:0:0] Optiarc DVD RW AD-7191S 1.02 (D:) (RAID) I 16:49:16 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 4x, 6x, 8x, 12x, 16x) I 16:49:16 Destination Media Sectors: 2,298,496 I 16:49:16 Write Mode: DVD I 16:49:16 Write Type: DAO I 16:49:16 Write Speed: 6x I 16:49:16 Link Size: Auto I 16:49:16 Lock Volume: Yes I 16:49:16 Test Mode: No I 16:49:16 OPC: No I 16:49:16 BURN-Proof: Enabled I 16:49:16 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x) I 16:49:17 Filling Buffer... (40 MB) I 16:49:18 Writing LeadIn... W 16:49:46 Failed to Write Sectors 480 - 511 - Reason: Logical Unit Communication Time-Out W 16:49:46 Retrying (1 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (2 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (3 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (4 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (5 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (6 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (7 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (8 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (9 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (10 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (11 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (12 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (13 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (14 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (15 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (16 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (17 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (18 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (19 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:03 Retrying (20 of 20)... W 16:52:03 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 16:52:14 Retrying (21)... W 16:52:14 Retry Failed - Reason: Cannot Write Medium - Incompatible Format E 16:52:15 Failed to Write Sectors 480 - 511 - Reason: Logical Unit Communication Time-Out I 16:52:15 Synchronising Cache... W 16:52:20 User opted to skip the 'Close Track/Session/Disc' functions. E 16:52:20 Failed to Write Image! E 16:52:20 Operation Failed! - Duration: 00:03:04 I 16:52:20 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x) Edited August 22, 2010 by cowboyup6983
mmalves Posted August 22, 2010 Posted August 22, 2010 Your burner is connected to a RAID controller and that could be messing with the communication to the burner. Do you use RAID? If not then you should try changing that controller mode to SATA/IDE/AHCI to see if your burner will work that way. If you can't turn off RAID in that controller then you'll need to get another SATA card (try all your SATA ports before doing this).
cowboyup6983 Posted August 22, 2010 Author Posted August 22, 2010 Your burner is connected to a RAID controller and that could be messing with the communication to the burner. Do you use RAID? If not then you should try changing that controller mode to SATA/IDE/AHCI to see if your burner will work that way. If you can't turn off RAID in that controller then you'll need to get another SATA card (try all your SATA ports before doing this). Ok, no new configuration, except for something in bios I changed recently. Something about IDE prefetch? I disable it because I thought that was making my hard drives lockup sometime. I will re-enable. Raid controller, don't know?? The optical drive is plug into the same sata connection as when I first built. There are six connections, I will try another one first. I think it maybe the file, maybe I did something wrong when I rip DVD to my drive using DVDFAB.
cowboyup6983 Posted August 22, 2010 Author Posted August 22, 2010 (edited) So I don't know what the RAID means in the log next to my burner, but power off PC, disconnected the power and SATA connection from burner. I moved to another connection, fired up PC and went into bios and re-enable that IDE prefetch mode, that I previously disable. Ran ImgBurn and re-attempted the project. I 18:20:23 ImgBurn Version 2.5.1.0 started! I 18:20:23 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 18:20:23 Total Physical Memory: 2,095,952 KB - Available: 1,473,316 KB I 18:20:23 Initialising SPTI... I 18:20:23 Searching for SCSI / ATAPI devices... I 18:20:23 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (E:) (SCSI) I 18:20:24 -> Drive 2 - Info: Optiarc DVD RW AD-7191S 1.02 (D:) (RAID) I 18:20:24 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 18:20:41 Operation Started! I 18:20:41 Source File: C:\Users\Desktop\THE_LAST_SONG.ISO I 18:20:41 Source File Sectors: 2,289,236 (MODE1/2048) I 18:20:41 Source File Size: 4,688,355,328 bytes I 18:20:41 Source File Volume Identifier: THE_LAST_SONG I 18:20:41 Source File Volume Set Identifier: 0006E2D1DVDSHRNK I 18:20:41 Source File Implementation Identifier: DVD Shrink I 18:20:41 Source File File System(s): ISO9660, UDF (1.02) I 18:20:41 Destination Device: [4:1:0] Optiarc DVD RW AD-7191S 1.02 (D:) (RAID) I 18:20:41 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 4x, 6x, 8x, 12x, 16x) I 18:20:41 Destination Media Sectors: 2,297,888 I 18:20:41 Write Mode: DVD I 18:20:41 Write Type: DAO I 18:20:41 Write Speed: 4x I 18:20:41 Link Size: Auto I 18:20:41 Lock Volume: Yes I 18:20:41 Test Mode: No I 18:20:41 OPC: No I 18:20:41 BURN-Proof: Enabled I 18:20:41 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 18:20:41 Filling Buffer... (40 MB) I 18:20:42 Writing LeadIn... I 18:21:14 Writing Session 1 of 1... (1 Track, LBA: 0 - 2289235) I 18:21:14 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2289235) I 18:35:16 Synchronising Cache... I 18:35:37 Exporting Graph Data... I 18:35:37 Graph Data File: C:\Users\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7191S_1.02_SUNDAY-AUGUST-22-2010_6-20_PM_RITEKF1_4x.ibg I 18:35:37 Export Successfully Completed! I 18:35:37 Operation Successfully Completed! - Duration: 00:14:56 I 18:35:37 Average Write Rate: 5,444 KB/s (3.9x) - Maximum Write Rate: 5,603 KB/s (4.0x) Edited August 22, 2010 by cowboyup6983
mmalves Posted August 22, 2010 Posted August 22, 2010 What's the brand and model of your motherboard? You can use SIW to find that out.
cowboyup6983 Posted August 23, 2010 Author Posted August 23, 2010 (edited) What's the brand and model of your motherboard? You can use SIW to find that out. Property Value Manufacturer Gigabyte Technology Co., Ltd. Model M57SLI-S4 Version Serial Number North Bridge NVIDIA nForce 570 SLI Revision A1 South Bridge NVIDIA nForce 570 SLI Revision A1 CPU AMD Athlon 64 X2 Dual Core Processor 6000+ Cpu Socket Socket AM2 (940) System Slots 2 PCI Memory Summary Maximum Capacity 2048 MBytes Maximum Memory Module Size 1024 MBytes Memory Slots 4 Error Correction None Warning! Accuracy of DMI data cannot be guaranteed I am not running and Nvidia/Gigabyte drivers, just the standard Universal Microsoft drivers, except for my VGA card which I obtained from Nvidia. Edited August 23, 2010 by cowboyup6983
cowboyup6983 Posted August 23, 2010 Author Posted August 23, 2010 Don't know if this makes any difference but when using ConvertXtoDVD, the log doesn't show a RAID configuration using my burner. This is what their log shows. New Drive selected : 4:1:0 - Optiarc DVD RW AD-7191S 1.02 [F] (Scsi)
cowboyup6983 Posted August 23, 2010 Author Posted August 23, 2010 I just insalled my board's "NVIDIA Corporation driver update for NVIDIA nForce Serial ATA Controller" and now the burner shows: I 17:24:02 -> Drive 2 - Info: Optiarc DVD RW AD-7191S 1.02 (F:) (Fibre) Anyone know what does "Fibre" mean, and will that conflict with anything.
mmalves Posted August 24, 2010 Posted August 24, 2010 Use the Discovery mode with Test Mode enabled to burn a disc and see how it goes: if it doesn't give any error then try burning your ISO image to see how it turns out.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now