Racem22 Posted August 23, 2010 Share Posted August 23, 2010 (edited) Hey guys, I just bought a new Lite-On iHAS124 Y DVD Burner to complement my BD Burner and tried to burn a movie and it errored out at about 57%. Something about "No Seek Complete". I guess it could be a problem with the media I'm using, which is Sony, MID Sony-D21-00. I basically use the Sonys for non-important stuff and my Verbatims for important so I guess this isn't really that big of a deal, just want to know if you guys had seen it before and you had a quick answer. Oh yeah also, I guess it could be because I flashed a modded firmware from CDFreaks so maybe I should flash back to a stock one and give it another try. Thanks a bunch. Logs are attached. Imgburn Log.txt ATAPI_iHAS124_Y_BL0X_MONDAY-AUGUST-23-2010_2-52_PM_SONY-D21-00_MAX.ibg Edited August 23, 2010 by Racem22 Link to comment Share on other sites More sharing options...
ianymaty Posted August 23, 2010 Share Posted August 23, 2010 I 14:52:06 Destination Media Type: DVD+R (Disc ID: SONY-D21-00) (Speeds: 4x, 6x, 8x, 12x, 16x, 18x)I 14:52:06 Write Speed: MAX Try a lower speed instead of default MAX (18x) Link to comment Share on other sites More sharing options...
Racem22 Posted August 26, 2010 Author Share Posted August 26, 2010 Well it probably never got above 10 or 11x but yeah I'll try setting it lower. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted August 26, 2010 Share Posted August 26, 2010 It would still be spinning at a speed which would enable it to reach 18x by the end... and that could be where the problem lies. Link to comment Share on other sites More sharing options...
Recommended Posts