ItsJason2010 Posted August 30, 2010 Share Posted August 30, 2010 Ok so I have a Ricoh MP5240A DVD RW drive and am using Verbatim DVD+R DL 8.5 Gb x8 disks, in attempt to burn xbox 360 backups. The problem is that my drive doesnt seem to detect the disks. Here is the Log: I 11:47:17 ImgBurn Version 2.5.1.0 started! I 11:47:17 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 11:47:17 Total Physical Memory: 785,904 KB - Available: 405,868 KB W 11:47:17 Drive J:\ (FAT32) does not support single files > 4 GB in size. I 11:47:17 Initialising SPTI... I 11:47:17 Searching for SCSI / ATAPI devices... I 11:47:17 -> Drive 1 - Info: RICOH DVD+RW MP5240A 1.11 (E:) (ATA) I 11:47:17 -> Drive 2 - Info: LITE-ON DVD SHD-16P1S GS07 (L:) (ATA) I 11:47:17 Found 1 DVD-ROM and 1 DVD+RW! At the bottom of imgburn i also get the message: Device Not Ready (Unknown (ASC: 0x92, ASCQ: 0x05)) So i tried updating my driver on the ricoh website and when i open r flash in attempt to update the driver i am asked to select the drive to update from a drop down list but the drive doesnt appear :s, so it will not let me update the driver at all. Any suggestions at all will be much appriciated. Link to comment Share on other sites More sharing options...
ianymaty Posted August 30, 2010 Share Posted August 30, 2010 Taken from Ricoh site http://www.ricoh.com/drive/asia/dvd/mp5240a/ Supported media for writing DVD+RW, DVD+R, CD-R, CD-RW, High-Speed CD-RW Your drive is pretty old and don't support burning Dual Layer discs. It's time to buy yourself a new drive if you want to burn those discs. On the other note... Did you followed carefuly the instructions on update procedure? http://www.ricoh.com/drive/asia/support/download/how_win.html If you not have a valid reason to stuck to Service Pack 2 on Windows you should update it to Service Pack 3 http://support.microsoft.com/kb/322389 Link to comment Share on other sites More sharing options...
Recommended Posts