ImgBurn Write Error with Verbatim DVD+r DL

[LSA7X]

Hey guys, this is my 1st post.

So I always use Verbatim 8x DVD+R DL disks. when i first started burning with them i had no such problems, then out of nowhere i can't get any luck with them.

I've checked fr the latest firmware with my LG Drive too.

I tried again with a new spindle earlier today, thought maybe the pros could tell from my log if there was anywhere im going wrong. Thanks.

 

I 20:42:01 ImgBurn Version 2.5.1.0 started!

I 20:42:01 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 20:42:01 Total Physical Memory: 2,881,216 KB - Available: 2,091,776 KB

W 20:42:02 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 20:42:02 Initialising SPTI...

I 20:42:02 Searching for SCSI / ATAPI devices...

I 20:42:02 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-T50N RP05 (D:) (RAID)

I 20:42:02 -> Drive 2 - Info: WDQRMV MB09EFCH 1.03 (E:) (SCSI)

I 20:42:02 -> Drive 3 - Info: WDQRMV MB09EFCH 1.03 (F:) (SCSI)

I 20:42:02 Found 1 DVD±RW/RAM and 2 BD-ROM/HD DVD-ROMs!

I 20:42:45 Operation Started!

I 20:42:45 Source File: C:\Users\Lloyd\Desktop\Xbox Burn\Mafia 2\Mafia 2.dvd

I 20:42:45 Source File Sectors: 3,827,488 (MODE1/2048)

I 20:42:45 Source File Size: 7,838,695,424 bytes

I 20:42:45 Source File Volume Identifier: DVD_ROM

I 20:42:45 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 20:42:45 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 20:42:45 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 20:42:45 Source File File System(s): ISO9660, UDF (1.50)

I 20:42:45 Destination Device: [2:7:0] HL-DT-ST DVDRAM GSA-T50N RP05 (D:) (RAID)

I 20:42:45 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x)

I 20:42:45 Destination Media Sectors: 4,173,824

I 20:42:45 Write Mode: DVD

I 20:42:45 Write Type: DAO

I 20:42:45 Write Speed: 6x

I 20:42:45 Link Size: Auto

I 20:42:45 Lock Volume: Yes

I 20:42:45 Test Mode: No

I 20:42:45 OPC: No

I 20:42:45 BURN-Proof: Enabled

I 20:42:45 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x)

I 20:42:45 Book Type Setting: N/A

I 20:42:45 User Specified L0 Data Zone Capacity: 1,913,760

E 20:44:40 Set L0 Data Zone Capacity Failed! - Reason: Write Error

E 20:44:40 Operation Failed! - Duration: 00:01:54

I 20:44:40 Average Write Rate: N/A - Maximum Write Rate: N/A

 

 

Note: I have tried at speeds of 2.4x and 4x too with the same outcome. Thanks.

[mmalves]

Try cleaning the drive with a lens cleaning disc, or even manually if you know how to do it. You could also try burning at 4x after cleaning.

 

If none of that helps then you should look for an external non-slim burner, preferably a common burner like an Optiarc AD-7240S in an external enclosure.