IMG Burn just quit.

Chainz · September 3, 2010

So I was trying to burn a 360 .dvd file with IMG Burn. Have all the stuff needed, Dual Layer 8.5 GB DVD's, with a dual layer burner, the whole shebang. Well, about 12% into the burning it pops up an error message and stops the burn. Not only did it not FULLY burn to the DVD, now I can't use that DVD for anything but a paperweight because there's stuff written to it, but the full game isn't on there so it won't work. So how do I get this thing where it will fully finish the burn? I've already tried it twice and the same thing both times, so I'm out two dvd's now, won't try this again until I am POSITIVE it's going to work. I'll post the error log if someone can tell me how to get to it. Thanks.

**mmalves** · September 3, 2010

The pink banner at the top of the page tells you how to get to the previous logs.

Chainz · September 3, 2010

Here's the log.

I 16:33:18 ImgBurn Version 2.5.1.0 started!

I 16:33:18 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 16:33:18 Total Physical Memory: 2,881,220 KB - Available: 1,657,756 KB

W 16:33:18 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 16:33:18 Initialising SPTI...

I 16:33:18 Searching for SCSI / ATAPI devices...

I 16:33:19 -> Drive 1 - Info: Optiarc DVD RW AD-7581S 4H02 (E:) (ATA)

I 16:33:19 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (G:) (SCSI)

I 16:33:19 -> Drive 3 - Info: ULC Q309M3W5UJG 1.03 (F:) (SCSI)

I 16:33:19 Found 1 DVD±RW/RAM and 2 BD-ROM/HD DVD-ROMs!

I 16:34:12 Operation Started!

I 16:34:12 Source File: C:\Users\Owner\Desktop\Mafia 2.dvd

I 16:34:12 Source File Sectors: 3,827,488 (MODE1/2048)

I 16:34:12 Source File Size: 7,838,695,424 bytes

I 16:34:12 Source File Volume Identifier: DVD_ROM

I 16:34:12 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 16:34:12 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 16:34:12 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 16:34:12 Source File File System(s): ISO9660, UDF (1.50)

I 16:34:12 Destination Device: [2:0:0] Optiarc DVD RW AD-7581S 4H02 (E:) (ATA)

I 16:34:12 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x)

I 16:34:12 Destination Media Sectors: 4,173,824

I 16:34:12 Write Mode: DVD

I 16:34:12 Write Type: DAO

I 16:34:12 Write Speed: 2.4x

I 16:34:12 Link Size: Auto

I 16:34:12 Lock Volume: Yes

I 16:34:12 Test Mode: No

I 16:34:12 OPC: No

I 16:34:12 BURN-Proof: Enabled

W 16:34:14 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 2,770 KB/s (2x)

I 16:34:14 Book Type Setting: N/A

I 16:34:14 User Specified L0 Data Zone Capacity: 1,913,760

I 16:34:14 Set L0 Data Zone Capacity Succeeded!

I 16:34:15 Filling Buffer... (40 MB)

I 16:34:16 Writing LeadIn...

I 16:35:10 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 16:35:10 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 16:35:10 Writing Layer 0... (LBA: 0 - 1913759)

W 16:39:11 Failed to Write Sectors 379008 - 379039 - Reason: Write Error

W 16:39:11 Retrying (1 of 20)...