luka861 Posted September 9, 2010 Share Posted September 9, 2010 Hi to all i've a problem with my pioneer dvrtd08.. recently when i try to burn an iso it says to me SET L0 DATA ZONE CAPACITY FAILED ..it's the first time that i see this error.. i don't know what i can do.. i always used verbatim dvd-dl and they never cause me problem but now something goes wrong..can you help me?? this is the log.. I 12:51:19 ImgBurn Version 2.5.2.0 started! I 12:51:19 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 12:51:19 Total Physical Memory: 1.960.996 KB - Available: 1.021.056 KB W 12:51:19 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 12:51:19 Initialising SPTI... I 12:51:19 Searching for SCSI / ATAPI devices... I 12:51:20 -> Drive 1 - Info: PIONEER DVD-RW DVRTD08 1.00 (D:) (SATA) I 12:51:20 -> Drive 2 - Info: BKJAVUX 30L2R8LQ 1.03 (E:) (SCSI) I 12:51:20 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 12:51:52 Operation Started! I 12:51:52 Source File: C:\Users\Luka\Desktop\Nuova cartella\cpx-nnn2.dvd I 12:51:52 Source File Sectors: 3.827.488 (MODE1/2048) I 12:51:52 Source File Size: 7.838.695.424 bytes I 12:51:52 Source File Volume Identifier: XGD2DVD_NTSC I 12:51:53 Source File Volume Set Identifier: 34672923 I 12:51:53 Source File Implementation Identifier: Sonic Scenarist 3.1 I 12:51:53 Source File File System(s): ISO9660; UDF (1.02) I 12:51:53 Destination Device: [1:0:0] PIONEER DVD-RW DVRTD08 1.00 (D:) (SATA) I 12:51:53 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x) I 12:51:53 Destination Media Sectors: 4.173.824 I 12:51:53 Write Mode: DVD I 12:51:53 Write Type: DAO I 12:51:53 Write Speed: 2,4x I 12:51:53 Link Size: Auto I 12:51:53 Lock Volume: Yes I 12:51:53 Test Mode: No I 12:51:53 OPC: No I 12:51:53 BURN-Proof: Enabled I 12:51:53 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x) I 12:51:53 Advanced Settings - Optimal Writing Speed: No I 12:51:53 User Specified L0 Data Zone Capacity: 1.913.760 E 12:53:24 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error E 12:53:24 Operation Failed! - Duration: 00:01:31 I 12:53:24 Average Write Rate: N/A - Maximum Write Rate: N/A Link to comment Share on other sites More sharing options...
mmalves Posted September 9, 2010 Share Posted September 9, 2010 Try burning at 4x or 6x. Try cleaning the drive with a lens cleaning disc, or even manually if you know how to do it. If none of that helps then try getting the 2.4x Verbatim DVD+R DL blanks. Alternatively, you could get a non-slim, normal size burner in an external enclosure. Link to comment Share on other sites More sharing options...
Recommended Posts