slimjim1284 Posted September 9, 2010 Share Posted September 9, 2010 Ok so I'm trying to burn an iso of Shutter Island with a Vertibatim 2.4x dvd+r DL disc, and it seems to burn fine with no errors, when I click in the "my computer" icon it appears to be a valid DVD with all the files and everything on the disc, but when I go to play it the dvd player (both the one on the TV and the computer) starts the play function then imediatly STOPS before anything comes up!!?? Does anybody know what's going on? Link to comment Share on other sites More sharing options...
ianymaty Posted September 9, 2010 Share Posted September 9, 2010 Read the pink bit above and provide a log Link to comment Share on other sites More sharing options...
slimjim1284 Posted September 10, 2010 Author Share Posted September 10, 2010 Ok here is the log. I'm so pissed about wasting money on these expensive vertibatim dvd+rdl, about to give up. I 21:01:44 ImgBurn Version 2.5.0.0 started! I 21:01:44 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 21:01:44 Total Physical Memory: 1,571,180 KB - Available: 803,128 KB I 21:01:45 Initialising SPTI... I 21:01:45 Searching for SCSI / ATAPI devices... I 21:01:45 Found 1 DVD±RW/RAM! I 21:03:19 Operation Started! I 21:03:19 Source File: C:\temp_dvd\SHUTTER_ISLAND\SHUTTER_ISLAND.iso I 21:03:19 Source File Sectors: 3,721,711 (MODE1/2048) I 21:03:19 Source File Size: 7,622,064,128 bytes I 21:03:19 Source File Volume Identifier: SHUTTER_ISLAND I 21:03:19 Source File Volume Set Identifier: 3C7F6A99 I 21:03:19 Source File Implementation Identifier: MEI I 21:03:19 Source File File System(s): ISO9660, UDF (1.02) I 21:03:19 Destination Device: [0:0:0] MATSHITA DVD-RAM UJ-850 RB01 (D:) (ATA) I 21:03:19 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x) I 21:03:19 Destination Media Sectors: 4,173,824 I 21:03:19 Write Mode: DVD I 21:03:19 Write Type: DAO I 21:03:19 Write Speed: 2.4x I 21:03:19 Link Size: Auto I 21:03:19 Lock Volume: Yes I 21:03:19 Test Mode: No I 21:03:19 OPC: No I 21:03:19 BURN-Proof: Enabled I 21:03:41 Optimal L0 Data Zone Capacity: 1,860,864 I 21:03:41 Optimal L0 Data Zone Method: ECC Block Boundary I 21:04:05 Set L0 Data Zone Capacity Succeeded! I 21:04:06 Filling Buffer... (40 MB) I 21:04:08 Writing LeadIn... I 21:04:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 3721710) I 21:04:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3721710) I 21:04:11 Writing Layer 0... (LBA: 0 - 1860863) W 21:20:02 Waiting for buffers to recover... (LBA: 1501792) W 21:20:20 Waiting for hard disk activity to reach threshold level... I 21:20:21 Writing Sectors... W 21:22:30 Waiting for buffers to recover... (LBA: 1700448) W 21:22:50 Waiting for hard disk activity to reach threshold level... I 21:22:54 Writing Sectors... W 21:23:56 Waiting for buffers to recover... (LBA: 1792064) W 21:24:18 Waiting for hard disk activity to reach threshold level... I 21:24:19 Writing Sectors... I 21:25:02 Writing Layer 1... (LBA: 1860864 - 3721710) I 21:44:55 Synchronising Cache... I 21:44:59 Closing Track... I 21:45:00 Finalising Disc... I 21:46:03 Exporting Graph Data... I 21:46:03 Graph Data File: C:\Documents and Settings\Student\Application Data\ImgBurn\Graph Data Files\MATSHITA_DVD-RAM_UJ-850_RB01_THURSDAY-SEPTEMBER-09-2010_9-03_PM_MKM-001-00_2.4x.ibg I 21:46:03 Export Successfully Completed! I 21:46:03 Operation Successfully Completed! - Duration: 00:42:43 I 21:46:03 Average Write Rate: 3,045 KB/s (2.2x) - Maximum Write Rate: 3,570 KB/s (2.6x) I 21:46:03 Cycling Tray before Verify... W 21:52:53 Waiting for device to become ready... I 21:53:09 Device Ready! I 21:53:11 Operation Started! I 21:53:11 Source Device: [0:0:0] MATSHITA DVD-RAM UJ-850 RB01 (D:) (ATA) I 21:53:11 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: MKM-001-00) (Speeds: 2.4x) I 21:53:11 Image File: C:\temp_dvd\SHUTTER_ISLAND\SHUTTER_ISLAND.iso I 21:53:11 Image File Sectors: 3,721,711 (MODE1/2048) I 21:53:11 Image File Size: 7,622,064,128 bytes I 21:53:11 Image File Volume Identifier: SHUTTER_ISLAND I 21:53:11 Image File Volume Set Identifier: 3C7F6A99 I 21:53:11 Image File Implementation Identifier: MEI I 21:53:11 Image File File System(s): ISO9660, UDF (1.02) I 21:53:11 Read Speed (Data/Audio): MAX / MAX I 21:53:12 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3721710) I 21:53:12 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3721710) I 21:53:12 Verifying Layer 0... (LBA: 0 - 1860863) I 22:04:13 Verifying Layer 1... (LBA: 1860864 - 3721710) I 22:15:12 Exporting Graph Data... I 22:15:12 Graph Data File: C:\Documents and Settings\Student\Application Data\ImgBurn\Graph Data Files\MATSHITA_DVD-RAM_UJ-850_RB01_THURSDAY-SEPTEMBER-09-2010_9-03_PM_MKM-001-00_2.4x.ibg I 22:15:12 Export Successfully Completed! I 22:15:12 Operation Successfully Completed! - Duration: 00:22:00 I 22:15:12 Average Verify Rate: 5,638 KB/s (4.1x) - Maximum Verify Rate: 8,086 KB/s (5.8x) I don't get it! Everything went through perfectly! Link to comment Share on other sites More sharing options...
Cynthia Posted September 10, 2010 Share Posted September 10, 2010 If you mount/play the source iso on your computer, the same "stop" issue then? ImgBurn doesn't change anything that should make the output be different than the source, so it sounds as an issue before the burning. Link to comment Share on other sites More sharing options...
ianymaty Posted September 10, 2010 Share Posted September 10, 2010 Update ImgBurn to latest version. If the iso was made somehow from an original pressed dvd, that will explain that behavior. It was a bad iso creation? Try what Cynthia suggest to mount the iso and play it on the computer. Link to comment Share on other sites More sharing options...
slimjim1284 Posted September 11, 2010 Author Share Posted September 11, 2010 Ok so I downloaded Virtual Clone drive and mounted my iso. And it does the same thing! Just goes into play function and then stops lol. Good call guys. This is so weird I used DVD-Cloner VII to rip my image, and it worked fine with another movie, but I guess it just dropped the ball this time. Question, why does it make a difference if the image was from a pressed DVD? Link to comment Share on other sites More sharing options...
Cynthia Posted September 11, 2010 Share Posted September 11, 2010 Might be a bad rip. Something in that program messed up the control files (IFO files). Think you should post your issue on that programs support forum. I'm sure they know how to solve the issue. I've never used that program. Link to comment Share on other sites More sharing options...
slimjim1284 Posted September 13, 2010 Author Share Posted September 13, 2010 Anybody know why it would make a difference if I got the image from a pressed DVD though? Link to comment Share on other sites More sharing options...
ianymaty Posted September 13, 2010 Share Posted September 13, 2010 Pressed DVDs contain some form of copyprotection and ImgBurn can't and won't handle it ... As we don't discuss ripping and circumverting anything here, I'm affraid you have to look elsewere to solve your problem. Hint: Google. Link to comment Share on other sites More sharing options...
Recommended Posts