noob mark Posted September 12, 2010 Posted September 12, 2010 Could anyone tell me why it failed at synchronizing at 100%? Thanks in advance! I 17:07:00 Operation Started! I 17:07:00 Source File: D:\Guitar.Hero.5.RF.XBOX360-MARVEL\mvlx-gh5g\mvlx-gh5g.dvd I 17:07:00 Source File Sectors: 3.827.488 (MODE1/2048) I 17:07:00 Source File Size: 7.838.695.424 bytes I 17:07:00 Source File Volume Identifier: DVD_ROM I 17:07:00 Source File Volume Set Identifier: 356fc000MS UDFBridge I 17:07:00 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 17:07:00 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 17:07:00 Source File File System(s): ISO9660; UDF (1.50) I 17:07:00 Destination Device: [0:0:0] HL-DT-ST DVDRAM GH22NS50 TN02 (G:) (USB) I 17:07:00 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2,4x) I 17:07:00 Destination Media Sectors: 3.827.520 I 17:07:00 Write Mode: DVD I 17:07:00 Write Type: DAO I 17:07:00 Write Speed: 2,4x I 17:07:00 Link Size: Auto I 17:07:00 Lock Volume: Yes I 17:07:00 Test Mode: No I 17:07:00 OPC: No I 17:07:00 BURN-Proof: Enabled I 17:07:03 Write Speed Successfully Set! - Effective: 3.324 KB/s (2,4x) I 17:07:03 Book Type Setting: DVD-ROM I 17:07:03 User Specified L0 Data Zone Capacity: 1.913.760 I 17:07:03 Set L0 Data Zone Capacity Succeeded! I 17:07:04 Filling Buffer... (40 MB) I 17:07:05 Writing LeadIn... I 17:07:17 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 17:07:17 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 17:07:17 Writing Layer 0... (LBA: 0 - 1913759) I 17:27:07 Writing Layer 1... (LBA: 1913760 - 3827487) I 17:46:59 Synchronising Cache... W 17:47:10 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 17:47:10 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure W 17:47:10 Retrying (1 of 3)... W 17:47:14 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 17:47:14 Retry Failed - Reason: Program Memory Area Update Failure W 17:47:14 Retrying (2 of 3)... W 17:47:16 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Is Full W 17:47:16 Retry Failed - Reason: Program Memory Area Is Full W 17:47:16 Retrying (3 of 3)... W 17:47:17 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Is Full W 17:47:17 Retry Failed - Reason: Program Memory Area Is Full W 17:47:46 Retrying (4)... W 17:47:47 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Is Full W 17:47:47 Retry Failed - Reason: Program Memory Area Is Full W 17:54:22 Retrying (5)... W 17:54:23 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Is Full W 17:54:24 Retry Failed - Reason: Program Memory Area Is Full I 18:32:04 Closing Track... I 18:32:05 Finalising Disc... W 18:32:09 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error - Incomplete Track in Session W 18:32:09 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session W 18:32:09 Retrying (1 of 3)... W 18:32:10 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 18:32:10 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 18:32:10 Retrying (2 of 3)... W 18:32:11 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 18:32:11 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 18:32:11 Retrying (3 of 3)... W 18:32:12 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 18:32:12 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session I 18:32:21 Exporting Graph Data... I 18:32:22 Graph Data File: C:\Users\Mark\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS50_TN02_ZONDAG-12-SEPTEMBER-2010_17-07_RITEK-D01-01_2,4x.ibg I 18:32:22 Export Successfully Completed! I 18:32:22 Operation Successfully Completed! - Duration: 01:25:21 I 18:32:22 Average Write Rate: 3.215 KB/s (2.3x) - Maximum Write Rate: 3.364 KB/s (2.4x) I 18:32:22 Cycling Tray before Verify... W 18:32:44 Waiting for device to become ready... I 18:33:23 Device Ready! E 18:33:52 Verify Failed! - Reason: Layouts do not match. I 18:34:18 Close Request Acknowledged I 18:34:18 Closing Down... I 18:34:19 Shutting down SPTI... I 18:34:19 ImgBurn closed!
LIGHTNING UK! Posted September 12, 2010 Posted September 12, 2010 http://forum.imgburn.com/index.php?showtopic=8000
noob mark Posted September 21, 2010 Author Posted September 21, 2010 OK, so I've bought Verbatims and now I get the following error/log: Before it started to write, the program said the file was to large for the dvd, because it's about 700mb and the dvd only 450. But that's nonsense since it clearly says 4.7GB on the dvd's themselves... I 12:34:11 ImgBurn Version 2.5.2.0 started! I 12:34:11 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000) I 12:34:11 Total Physical Memory: 2.094.912 KB - Available: 1.227.372 KB W 12:34:11 Drive H:\ (FAT32) does not support single files > 4 GB in size. W 12:34:11 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 12:34:11 Initialising SPTI... I 12:34:11 Searching for SCSI / ATAPI devices... I 12:34:12 -> Drive 1 - Info: Optiarc DVD RW AD-7540A 1.42 (E:) (ATA) I 12:34:12 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS50 TN02 (G:) (USB) I 12:34:12 Found 2 DVD±RW/RAMs! W 12:34:40 User accepted disc space warning and is attempting to overburn! I 12:34:41 Operation Started! I 12:34:41 Source File: D:\Guitar.Hero.5.RF.XBOX360-MARVEL\mvlx-gh5g\mvlx-gh5g.dvd I 12:34:41 Source File Sectors: 3.827.488 (MODE1/2048) I 12:34:41 Source File Size: 7.838.695.424 bytes I 12:34:41 Source File Volume Identifier: DVD_ROM I 12:34:41 Source File Volume Set Identifier: 356fc000MS UDFBridge I 12:34:41 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 12:34:41 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 12:34:41 Source File File System(s): ISO9660; UDF (1.50) I 12:34:41 Destination Device: [0:0:0] HL-DT-ST DVDRAM GH22NS50 TN02 (G:) (USB) I 12:34:41 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x; 8x; 12x; 16x; 18x; 20x; 22x) I 12:34:41 Destination Media Sectors: 2.295.104 I 12:34:41 Write Mode: DVD I 12:34:41 Write Type: DAO I 12:34:41 Write Speed: 2,4x I 12:34:41 DVD+R Reserve Track: No I 12:34:41 Link Size: Auto I 12:34:41 Lock Volume: Yes I 12:34:41 Test Mode: No I 12:34:41 OPC: No I 12:34:41 BURN-Proof: Enabled W 12:34:41 Write Speed Miscompare! - MODE SENSE: 5.540 KB/s (4x), GET PERFORMANCE: 30.617 KB/s (22,7x) W 12:34:41 Write Speed Miscompare! - MODE SENSE: 5.540 KB/s (4x), GET PERFORMANCE: 30.617 KB/s (22,7x) W 12:34:41 Write Speed Miscompare! - MODE SENSE: 5.540 KB/s (4x), GET PERFORMANCE: 30.617 KB/s (22,7x) W 12:34:41 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x) / 30.617 KB/s (22,7x) I 12:34:41 Book Type Setting: DVD-ROM I 12:34:41 Filling Buffer... (40 MB) I 12:34:43 Writing LeadIn... I 12:34:58 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 12:34:58 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) W 12:49:06 Failed to Write Sectors 2295104 - 2295135 - Reason: Logical Block Address out of Range W 12:49:06 Retrying (1 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (2 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (3 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (4 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (5 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (6 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (7 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (8 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (9 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (10 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (11 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (12 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (13 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (14 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (15 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (16 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (17 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (18 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (19 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (20 of 20)... W 12:49:07 Retry Failed - Reason: Logical Block Address out of Range W 12:49:21 Retrying (21)... W 12:49:22 Retry Failed - Reason: Logical Block Address out of Range W 12:49:23 Retrying (22)... W 12:49:23 Retry Failed - Reason: Logical Block Address out of Range W 12:49:24 Retrying (23)... W 12:49:24 Retry Failed - Reason: Logical Block Address out of Range E 12:49:25 Failed to Write Sectors 2295104 - 2295135 - Reason: Logical Block Address out of Range I 12:49:25 Synchronising Cache... I 12:49:40 Closing Track... I 12:49:44 Finalising Disc... E 12:50:03 Failed to Write Image! I 12:50:03 Exporting Graph Data... I 12:50:03 Graph Data File: C:\Users\Mark\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS50_TN02_DINSDAG-21-SEPTEMBER-2010_12-34_MCC-004-00_2,4x.ibg I 12:50:03 Export Successfully Completed! E 12:50:03 Operation Failed! - Duration: 00:15:22 I 12:50:03 Average Write Rate: 5.300 KB/s (3.8x) - Maximum Write Rate: 5.577 KB/s (4.0x)
noob mark Posted September 21, 2010 Author Posted September 21, 2010 OK, so I've bought Verbatims and now I get the following error/log: Before it started to write, the program said the file was to large for the dvd, because it's about 700mb and the dvd only 450. But that's nonsense since it clearly says 4.7GB on the dvd's themselves... I 12:34:11 ImgBurn Version 2.5.2.0 started! I 12:34:11 Microsoft Windows Vista Home Premium Edition (6.0, Build 6000) I 12:34:11 Total Physical Memory: 2.094.912 KB - Available: 1.227.372 KB W 12:34:11 Drive H:\ (FAT32) does not support single files > 4 GB in size. W 12:34:11 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 12:34:11 Initialising SPTI... I 12:34:11 Searching for SCSI / ATAPI devices... I 12:34:12 -> Drive 1 - Info: Optiarc DVD RW AD-7540A 1.42 (E:) (ATA) I 12:34:12 -> Drive 2 - Info: HL-DT-ST DVDRAM GH22NS50 TN02 (G:) (USB) I 12:34:12 Found 2 DVD±RW/RAMs! W 12:34:40 User accepted disc space warning and is attempting to overburn! I 12:34:41 Operation Started! I 12:34:41 Source File: D:\Guitar.Hero.5.RF.XBOX360-MARVEL\mvlx-gh5g\mvlx-gh5g.dvd I 12:34:41 Source File Sectors: 3.827.488 (MODE1/2048) I 12:34:41 Source File Size: 7.838.695.424 bytes I 12:34:41 Source File Volume Identifier: DVD_ROM I 12:34:41 Source File Volume Set Identifier: 356fc000MS UDFBridge I 12:34:41 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 12:34:41 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 12:34:41 Source File File System(s): ISO9660; UDF (1.50) I 12:34:41 Destination Device: [0:0:0] HL-DT-ST DVDRAM GH22NS50 TN02 (G:) (USB) I 12:34:41 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x; 8x; 12x; 16x; 18x; 20x; 22x) I 12:34:41 Destination Media Sectors: 2.295.104 I 12:34:41 Write Mode: DVD I 12:34:41 Write Type: DAO I 12:34:41 Write Speed: 2,4x I 12:34:41 DVD+R Reserve Track: No I 12:34:41 Link Size: Auto I 12:34:41 Lock Volume: Yes I 12:34:41 Test Mode: No I 12:34:41 OPC: No I 12:34:41 BURN-Proof: Enabled W 12:34:41 Write Speed Miscompare! - MODE SENSE: 5.540 KB/s (4x), GET PERFORMANCE: 30.617 KB/s (22,7x) W 12:34:41 Write Speed Miscompare! - MODE SENSE: 5.540 KB/s (4x), GET PERFORMANCE: 30.617 KB/s (22,7x) W 12:34:41 Write Speed Miscompare! - MODE SENSE: 5.540 KB/s (4x), GET PERFORMANCE: 30.617 KB/s (22,7x) W 12:34:41 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x) / 30.617 KB/s (22,7x) I 12:34:41 Book Type Setting: DVD-ROM I 12:34:41 Filling Buffer... (40 MB) I 12:34:43 Writing LeadIn... I 12:34:58 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 12:34:58 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) W 12:49:06 Failed to Write Sectors 2295104 - 2295135 - Reason: Logical Block Address out of Range W 12:49:06 Retrying (1 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (2 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (3 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (4 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (5 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (6 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (7 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (8 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (9 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (10 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (11 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (12 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (13 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (14 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (15 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (16 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (17 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (18 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (19 of 20)... W 12:49:06 Retry Failed - Reason: Logical Block Address out of Range W 12:49:06 Retrying (20 of 20)... W 12:49:07 Retry Failed - Reason: Logical Block Address out of Range W 12:49:21 Retrying (21)... W 12:49:22 Retry Failed - Reason: Logical Block Address out of Range W 12:49:23 Retrying (22)... W 12:49:23 Retry Failed - Reason: Logical Block Address out of Range W 12:49:24 Retrying (23)... W 12:49:24 Retry Failed - Reason: Logical Block Address out of Range E 12:49:25 Failed to Write Sectors 2295104 - 2295135 - Reason: Logical Block Address out of Range I 12:49:25 Synchronising Cache... I 12:49:40 Closing Track... I 12:49:44 Finalising Disc... E 12:50:03 Failed to Write Image! I 12:50:03 Exporting Graph Data... I 12:50:03 Graph Data File: C:\Users\Mark\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS50_TN02_DINSDAG-21-SEPTEMBER-2010_12-34_MCC-004-00_2,4x.ibg I 12:50:03 Export Successfully Completed! E 12:50:03 Operation Failed! - Duration: 00:15:22 I 12:50:03 Average Write Rate: 5.300 KB/s (3.8x) - Maximum Write Rate: 5.577 KB/s (4.0x)
LIGHTNING UK! Posted September 21, 2010 Posted September 21, 2010 'nonsense' hey?! You think you know more about the disc than the program does? Sure, ok! You need double layer discs for the image you're trying to burn, not single layer ones as you've got there.
noob mark Posted September 21, 2010 Author Posted September 21, 2010 Meant no disrespect, English is not my native language. Sorry if I offended you. Thanks for clarifying though, I asked for dual layer, so I figured I had em. Guess I got ripped off
LIGHTNING UK! Posted September 21, 2010 Posted September 21, 2010 No problem, I just thought it was funny that someone calling themselves 'noob mark' and making several 'noob' type mistakes with posts (and purchases, as it would seem) would think the program was saying things that are nonsense. I've put a lot of checks in place to help new users and attempt to stop them making mistakes - these checks/message should not just be shrugged off! If the program says something won't work then chances are that it really won't work... it's not lying to you No harm done and I wish you every success with your Verbatim double layer discs when you get them.
Recommended Posts