Jump to content

Cant Burn Fast Then 2.4x


Recommended Posts

Posted

i burner cant burn up to 16x dual layered and everything i am burning is only burning at 2.4x can someone help me with this i use img burn and nero to burn all my stuff i dunno what happened that all of a sudden my stuff is only burning at 2.4x any help would be gr8 guys thx

Posted

My Burner can burn up to 16x oops :)

Posted

The window on the right hand side shows info about your drive and media. Just copy and paste it here so we can see what's going on. It'll look like this:

 

PIONEER DVD-RW DVR-109 1.58 (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,298,496

Free Space: 4,707,319,808 bytes

Free Time: 510:48:46 (MM:SS:FF)

Supported Write Speeds: 4x, 6x, 8x, 12x

 

Pre-recorded Information:

Manufacturer ID: RITEKG05

 

Recording Management Area Information:

PIONEER DVD-RW DVR-109

 

Physical Format Information (Last Recorded):

Book Type: DVD-R

Part Version: 5

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 0

Last Physical Sector in Layer 0: 0

Posted

LITE-ON DVDRW SOHW-832S VTS3 (ATA)

Current Profile: DVD+R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,295,104

Free Space: 4,700,372,992 bytes

Free Time: 510:03:29 (MM:SS:FF)

Supported Write Speeds: 2.4x

 

Physical Format Information (ADIP):

Disc ID: MCC-004-00

Book Type: DVD+R

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 2,491,711

Last Physical Sector in Layer 0: 0

Posted

and i know my burner burns up to 16x and its dual layered burner but i dont know what going on that i can only burn at 2.4 x speed

Posted

where did you get that firmware?

it looks nothing like the ones for your burner. check here http://forum.rpc1.org/dl_firmware.php?download_id=1818

when i had an 832 lite-on it was only rated as 8x

check your firmware- see if it helps

Posted

how do i check my firmware corn

Posted

where did you find that firmware and how long have you had it installed?

Posted

i dunno just recently my burner started burning at this speed the last week id say can you tell me whats wrong with it

Posted

well if it has been burning fast with that firmware on it then you must have dma problems.

look at this and be sure to delete your controller and re-boot

Posted

it says i am on ultra dma mode5

Posted

did you delete and re-boot? windows lies about it

Posted

yes i deleted it and still shows that drive only supports 2.4 burning :( any suggestions what to do now

Posted

that firmware worries me, try flashing to VSOM

Posted

i was gonna reformatt will that help or no and where do i get vsom and i was wondering if you know how all out of the blue this would just start burning at 2.4 i didnt do anything no downloads or anything thx

Posted

you can get VSOM from the link i posted in post #6.

re-formatting is a bit drastic if everything else is ok.

is it just these discs that show 2.4x max or is it the same with other discs?

Posted

all discs tayio yudens verbatims and verbatim dual layerd there all are 2.4x speed even my verbatims that burns at 16x

Posted

Have you tried the new firmware?

Posted

i tried VSOM and its saying error no match drive detected this utility is only for lite on dvdrw sohw-832s drive then it says detected drives 0-0-0-0-E lite on dvdrw sohw-832s VTS3

Posted

what brand is your computer?

Posted
i tried VSOM and its saying error no match drive detected this utility is only for lite on dvdrw sohw-832s drive then it says detected drives 0-0-0-0-E lite on dvdrw sohw-832s VTS3

 

 

Pretty sure that's saying your drive is OEM. In order to flash it with 832 firmware (which is what your trying to do by the way w/ VSOM) you'll probably need to use FlashFix or something like it to get it to work. In essence you'd be converting it to a stock Liteon 832.

Posted

its a gateway computer xl 7200

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.