sha Posted September 27, 2010 Posted September 27, 2010 (edited) i recently had an rma for replacement verbatim discs, as the first batch were apparently defective. but now ive gotten two I/o errors in a row, when before i never got a write error with verbatim. only other time i ever got errors like this was with memorex. Im just trying to figure out what the definite problem is. the first burn had the same error at 33% and this one was about 46%: ; //****************************************\\ ; ImgBurn Version 2.5.2.0 - Log ; Monday, 27 September 2010, 13:18:17 ; \\****************************************// ; ; I 12:54:13 ImgBurn Version 2.5.2.0 started! I 12:54:13 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 12:54:13 Total Physical Memory: 2,096,696 KB - Available: 1,297,528 KB I 12:54:13 Initialising SPTI... I 12:54:13 Searching for SCSI / ATAPI devices... I 12:54:13 -> Drive 1 - Info: LITE-ON DVDRW LH-20A1P KL0P (E:) (ATA) I 12:54:13 -> Drive 2 - Info: SAMSUNG DVD-ROM SD-616E F502 (F:) (ATA) I 12:54:13 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 13:00:41 Operation Started! I 13:00:41 Source File: C:\Users\Sha\Desktop\ZARTH_UNGODLY\Ungodly-HRsv2.dvd I 13:00:41 Source File Sectors: 3,827,488 (MODE1/2048) I 13:00:41 Source File Size: 7,838,695,424 bytes I 13:00:41 Source File Volume Identifier: DVD_ROM I 13:00:41 Source File Volume Set Identifier: ec67c000MS UDFBridge I 13:00:41 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 13:00:41 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 13:00:41 Source File File System(s): ISO9660, UDF (1.50) I 13:00:41 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1P KL0P (E:) (ATA) I 13:00:41 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 13:00:41 Destination Media Sectors: 4,173,824 I 13:00:41 Write Mode: DVD I 13:00:41 Write Type: DAO I 13:00:41 Write Speed: 2.4x I 13:00:41 Link Size: Auto I 13:00:41 Lock Volume: Yes I 13:00:41 Test Mode: No I 13:00:41 OPC: No I 13:00:41 BURN-Proof: Enabled I 13:00:41 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 13:00:41 Book Type Setting: DVD-ROM I 13:00:41 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes I 13:00:41 User Specified L0 Data Zone Capacity: 1,913,760 I 13:01:47 Set L0 Data Zone Capacity Succeeded! I 13:01:48 Filling Buffer... (40 MB) I 13:01:49 Writing LeadIn... I 13:01:52 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 13:01:52 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 13:01:52 Writing Layer 0... (LBA: 0 - 1913759) W 13:15:10 Failed to Write Sectors 1274240 - 1274271 - Reason: Write Error W 13:15:10 Retrying (1 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (2 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (3 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (4 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (5 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (6 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (7 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (8 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (9 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (10 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (11 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (12 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (13 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (14 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (15 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (16 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (17 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (18 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (19 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write W 13:15:10 Retrying (20 of 20)... W 13:15:10 Retry Failed - Reason: Invalid Address For Write E 13:18:08 Failed to Write Sectors 1274240 - 1274271 - Reason: Write Error E 13:18:08 Next Writable Address: 0 I 13:18:08 Synchronising Cache... W 13:18:14 User opted to skip the 'Close Track/Session/Disc' functions. E 13:18:14 Failed to Write Image! I 13:18:14 Exporting Graph Data... I 13:18:14 Graph Data File: C:\Users\Sha\AppData\Roaming\ImgBurn\Graph Data Files\LITE-ON_DVDRW_LH-20A1P_KL0P_MONDAY-SEPTEMBER-27-2010_1-00_PM_MKM-001-00_2.4x.ibg I 13:18:14 Export Successfully Completed! E 13:18:14 Operation Failed! - Duration: 00:17:33 I 13:18:14 Average Write Rate: 2,611 KB/s (1.9x) - Maximum Write Rate: 3,359 KB/s (2.4x) I 13:18:16 Close Request Acknowledged I 13:18:16 Closing Down... I 13:18:17 Shutting down SPTI... I 13:18:17 ImgBurn closed! Edited September 27, 2010 by sha
LIGHTNING UK! Posted September 27, 2010 Posted September 27, 2010 The image is nothing to do with anything, this is purely a hardware issue. (drive and media) If you're already on your 2nd spindle, maybe it's actually the drives fault? Try cleaning it.
sha Posted September 27, 2010 Author Posted September 27, 2010 yea while my RMA was being processed i actually opened the drive and cleaned the laser myself, im hoping that didnt mess it up in the process. im going to try the lens cleaner one more time.
Recommended Posts