dcahrakos Posted October 3, 2010 Share Posted October 3, 2010 (edited) Hey there, I recently started getting this error, I was able to burn discs no problem before but after taking a break from burning them for a little over a month, I now get the following error in ImgBurn: I 15:34:18 ImgBurn Version 2.5.1.0 started! I 15:34:18 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 15:34:18 Total Physical Memory: 4,157,712 KB - Available: 2,430,400 KB I 15:34:18 Initialising SPTI... I 15:34:18 Searching for SCSI / ATAPI devices... I 15:34:20 -> Drive 1 - Info: TSSTcorp CDDVDW TS-L633M 0200 (E:) (SATA) I 15:34:20 Found 1 DVD±RW/RAM! I 15:35:16 Operation Started! I 15:35:16 Source File: C:\Users\Dcahrakos\Desktop\Games\Mafia 2.dvd I 15:35:16 Source File Sectors: 3,827,488 (MODE1/2048) I 15:35:16 Source File Size: 7,838,695,424 bytes I 15:35:16 Source File Volume Identifier: DVD_ROM I 15:35:16 Source File Volume Set Identifier: 356fc000MS UDFBridge I 15:35:16 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 15:35:16 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 15:35:16 Source File File System(s): ISO9660, UDF (1.50) I 15:35:16 Destination Device: [1:0:0] TSSTcorp CDDVDW TS-L633M 0200 (E:) (SATA) I 15:35:16 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 3x, 4x, 6x) I 15:35:16 Destination Media Sectors: 4,173,824 I 15:35:16 Write Mode: DVD I 15:35:16 Write Type: DAO I 15:35:16 Write Speed: MAX I 15:35:16 Link Size: Auto I 15:35:16 Lock Volume: Yes I 15:35:16 Test Mode: No I 15:35:16 OPC: No I 15:35:16 BURN-Proof: Enabled I 15:35:18 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x) I 15:35:18 Book Type Setting: N/A I 15:35:18 Optimal L0 Data Zone Capacity: 1,913,760 I 15:35:18 Optimal L0 Data Zone Method: Copied From Original Disc I 15:36:06 Set L0 Data Zone Capacity Succeeded! I 15:36:06 Filling Buffer... (40 MB) I 15:36:09 Writing LeadIn... I 15:36:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 15:36:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 15:36:11 Writing Layer 0... (LBA: 0 - 1913759) W 15:48:09 Failed to Write Sectors 1770272 - 1770303 - Reason: No Additional Sense Information W 15:48:09 Retrying (1 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (2 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (3 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (4 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (5 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (6 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (7 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (8 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (9 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (10 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (11 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (12 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (13 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (14 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (15 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (16 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (17 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (18 of 20)... W 15:48:14 Retry Failed - Reason: Invalid Address For Write W 15:48:14 Retrying (19 of 20)... W 15:48:15 Retry Failed - Reason: Invalid Address For Write W 15:48:15 Retrying (20 of 20)... W 15:48:15 Retry Failed - Reason: Invalid Address For Write W 16:23:07 Retrying (21)... W 16:23:07 Retry Failed - Reason: Invalid Address For Write W 16:23:07 Retrying (22)... W 16:23:07 Retry Failed - Reason: Invalid Address For Write W 16:23:08 Retrying (23)... W 16:23:08 Retry Failed - Reason: Invalid Address For Write W 16:23:08 Retrying (24)... W 16:23:08 Retry Failed - Reason: Invalid Address For Write W 16:23:08 Retrying (25)... W 16:23:08 Retry Failed - Reason: Invalid Address For Write W 16:23:08 Retrying (26)... W 16:23:08 Retry Failed - Reason: Invalid Address For Write W 16:23:08 Retrying (27)... W 16:23:08 Retry Failed - Reason: Invalid Address For Write E 16:23:13 Failed to Write Sectors 1770272 - 1770303 - Reason: No Additional Sense Information E 16:23:13 Next Writable Address: 1769600 I 16:23:13 Synchronising Cache... W 16:23:15 User opted to skip the 'Close Track/Session/Disc' functions. E 16:23:15 Failed to Write Image! I 16:23:15 Exporting Graph Data... I 16:23:15 Graph Data File: C:\Users\Dcahrakos\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_TS-L633M_0200_SUNDAY-OCTOBER-03-2010_3-35_PM_RITEK-S04-66_MAX.ibg I 16:23:15 Export Successfully Completed! E 16:23:15 Operation Failed! - Duration: 00:47:59 I 16:23:15 Average Write Rate: 1,254 KB/s (0.9x) - Maximum Write Rate: 8,442 KB/s (6.1x) The odd thing is, that no matter what I do it errors out at the same percentage and LBA every single time. I have tried lower write speeds, etc. but nothing seems to work anymore. Thanks in advance for any help Edited October 3, 2010 by dcahrakos Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 3, 2010 Share Posted October 3, 2010 Your drivers are probably messing with the real error message. What controller is the drive connected to? What chipset does your motherboard use? Read this, it tells you some things you can try. http://forum.imgburn.com/index.php?showtopic=8000 Update ImgBurn too. Link to comment Share on other sites More sharing options...
dcahrakos Posted October 3, 2010 Author Share Posted October 3, 2010 Chipset is: Intel PM45 (Cantiga-PM) + ICH9M (Base) Controller is: SATA I've read the thread, but I already tried looking for updated firmware, I cant seem to find any. If I have to I will run out and buy a new DVD drive but I wanted to try to get this one working first since it use to work perfectly fine. Link to comment Share on other sites More sharing options...
mmalves Posted October 3, 2010 Share Posted October 3, 2010 Try the DMA fix as per the 2nd post from the FAQ thread. Link to comment Share on other sites More sharing options...
dcahrakos Posted October 3, 2010 Author Share Posted October 3, 2010 Ok, so I took a look at the DMA fix method in the faq. Both "ATA Channel 0" and "ATA Channel 1" have DMA enabled. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 3, 2010 Share Posted October 3, 2010 I still don't get how people can miss the 'Important' bit! Are you able to install the 'STOR_allOS_9.6.0.1014_PV.exe' program from here? http://downloadcenter.intel.com/detail_desc.aspx?agr=Y&DwnldID=15251 Link to comment Share on other sites More sharing options...
dcahrakos Posted October 3, 2010 Author Share Posted October 3, 2010 (edited) I didn't so much miss the "important" bit as skipped over it because i've already uninstalled it and rebooted before even coming here for help lol. I was able to install that software, and will reboot now. Edit: Am now trying to burn after installing the "Intel Rapid Storage Technology" software you linked. Will reply back with results. edit2: Thanks Lightning UK that worked and I can now burn flawlessly again!! Thank you so much. Edited October 4, 2010 by dcahrakos Link to comment Share on other sites More sharing options...
Recommended Posts