Error burning dual layer dvd+r's

[yozee]

Hi!

 

my name is yoz or watever you wanna call me. i just registered here and just have a simple question or an explanation to figure out.

 

here is my log-

(im stil burning now to just see wat happes)

 

I 16:55:35 ImgBurn Version 2.5.2.0 started!

I 16:55:35 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 16:55:35 Total Physical Memory: 1,561,920 KB - Available: 313,956 KB

I 16:55:35 Initialising SPTI...

I 16:55:35 Searching for SCSI / ATAPI devices...

I 16:55:36 -> Drive 1 - Info: MATSHITA DVD-RAM UJ-851S 1.50 (E:) (ATA)

I 16:55:36 Found 1 DVD±RW/RAM!

E 16:55:48 Failed to check for ImgBurn update!

I 16:57:24 Operation Started!

I 16:57:24 Source File: C:\Users\Austin\Desktop\Austin's Shit\d\Halo Reach\Halo - Reach.dvd

I 16:57:24 Source File Sectors: 3,827,488 (MODE1/2048)

I 16:57:24 Source File Size: 7,838,695,424 bytes

I 16:57:24 Source File Volume Identifier: DVD_ROM

I 16:57:24 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 16:57:24 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 16:57:24 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 16:57:24 Source File File System(s): ISO9660, UDF (1.50)

I 16:57:24 Destination Device: [0:0:0] MATSHITA DVD-RAM UJ-851S 1.50 (E:) (ATA)

I 16:57:24 Destination Media Type: DVD+R DL (Disc ID: MBIPG101-R10-65) (Speeds: 2.4x)

I 16:57:24 Destination Media Sectors: 4,173,824

I 16:57:24 Write Mode: DVD

I 16:57:24 Write Type: DAO

I 16:57:24 Write Speed: 2.4x

I 16:57:24 Link Size: Auto

I 16:57:24 Lock Volume: Yes

I 16:57:24 Test Mode: No

I 16:57:24 OPC: No

I 16:57:24 BURN-Proof: Enabled

I 16:57:24 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 16:57:24 Optimal L0 Data Zone Capacity: 1,913,760

I 16:57:24 Optimal L0 Data Zone Method: Copied From Original Disc

W 16:58:18 Set L0 Data Zone Capacity Failed! - Reason: Focus Servo Error

W 16:58:18 Retrying (1)...

W 16:58:19 Retry Failed - Reason: Invalid Field in CDB

W 16:58:19 Retrying (2)...

W 16:58:20 Retry Failed - Reason: Invalid Field in CDB

W 16:58:20 Retrying (3)...

W 16:58:21 Retry Failed - Reason: Invalid Field in CDB

W 16:58:21 Retrying (4)...

W 16:58:22 Retry Failed - Reason: Invalid Field in CDB

W 16:58:22 Retrying (5)...

W 16:58:23 Retry Failed - Reason: Invalid Field in CDB

W 16:58:23 Retrying (6)...

W 16:58:24 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in CDB

I 16:58:25 Filling Buffer... (40 MB)

I 16:58:27 Writing LeadIn...

I 16:58:51 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 16:58:51 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 16:58:51 Writing Layer 0... (LBA: 0 - 1913759)

 

 

uh, im useing memorex Dual layer DVD+R 8x 8.5GB 240min's

 

thanks, yozee

 

 

If there is an attachment its just me eating at this reasturant called 'the burger king' lol. =)

[mmalves]

http://forum.imgburn.com/index.php?showtopic=8000

[yozee]

so your saying memorex isnt good? its like a step behind verbatim. i know verbatims are the best but they are expensive. i have also already burned this exact image file on the same discs like a week ago. dont understand.

 

thanks again, yoz

[mmalves]

The burn process relies on the burner/firmware/media combination, so that's the three things you can change in order to get a better burn. Also, as the link above says, slim burners are rubbish, so your chance of a good burn on cheap media is also slim.

[yozee]

i see, so your saying that it was just random that the lasy burn didnt have an error and this one did because i have a bad media/burner combo? and yes i am on a laptop.