atakli Posted October 9, 2010 Share Posted October 9, 2010 (edited) Hi there i was going to say im having problem when i burn xbox 360 games with my img burn program its saying finalise disc failed.. can you help please. finalise disc failed Device: [2:1:0] Optiarc DVD RW AD - 7240S 1.03 (D:) (ATA) Reason: Power Calibration Area Error. this is the error it comes up. I 13:50:03 ImgBurn Version 2.5.2.0 started! I 13:50:03 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 13:50:03 Total Physical Memory: 3,144,248 KB - Available: 2,480,044 KB W 13:50:03 Drive E:\ (FAT32) does not support single files > 4 GB in size. W 13:50:03 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 13:50:03 Initialising Patin-Couffin... I 13:50:03 Patin-Couffin - VSO Software - Version 1.36.0.0 - Internal Revision 36 I 13:50:03 Searching for SCSI / ATAPI devices... I 13:50:03 -> Drive 1 - Info: Optiarc DVD RW AD-7240S 1.04 (D:) (ATA) I 13:50:03 -> Drive 2 - Info: KFK QRGDQZ8X 1.04 (J:) (SCSI) I 13:50:03 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 13:50:14 Operation Started! I 13:50:14 Source File: C:\Users\Atakli\Downloads\dgr-pes11.dvd I 13:50:14 Source File Sectors: 3,697,696 (MODE1/2048) I 13:50:14 Source File Size: 7,572,881,408 bytes I 13:50:14 Source File Volume Identifier: DVD_ROM I 13:50:14 Source File Volume Set Identifier: ec67c000MS UDFBridge I 13:50:14 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 13:50:14 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 13:50:14 Source File File System(s): ISO9660, UDF (1.50) I 13:50:14 Destination Device: [2:1:0] Optiarc DVD RW AD-7240S 1.04 (D:) (ATA) I 13:50:14 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 13:50:14 Destination Media Sectors: 4,173,824 I 13:50:14 Write Mode: DVD I 13:50:14 Write Type: DAO I 13:50:14 Write Speed: 8x I 13:50:14 Link Size: Auto I 13:50:14 Lock Volume: Yes I 13:50:14 Test Mode: No I 13:50:14 OPC: No I 13:50:14 BURN-Proof: Enabled I 13:50:15 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 13:50:15 Book Type Setting: DVD-ROM I 13:50:15 User Specified L0 Data Zone Capacity: 1,913,760 I 13:50:20 Set L0 Data Zone Capacity Succeeded! I 13:50:21 Filling Buffer... (40 MB) I 13:50:22 Writing LeadIn... I 13:50:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 3697695) I 13:50:25 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3697695) I 13:50:25 Writing Layer 0... (LBA: 0 - 1913759) I 13:58:45 Writing Layer 1... (LBA: 1913760 - 3697695) I 14:06:22 Synchronising Cache... I 14:06:23 Closing Track... I 14:06:38 Finalising Disc... W 14:07:11 Potential 'WaitImmediateIO' Deferred Error - (63%, 0/3) - Power On, Reset, or Bus Device Reset Occurred W 14:07:11 Finalise Disc Failed! - Reason: Power On, Reset, or Bus Device Reset Occurred W 14:07:11 Retrying (1 of 3)... W 14:07:11 Retry Failed - Reason: Logical Unit is in process of becoming ready W 14:07:11 Retrying (2 of 3)... W 14:07:11 Retry Failed - Reason: Logical Unit is in process of becoming ready W 14:07:11 Retrying (3 of 3)... W 14:07:11 Retry Failed - Reason: Logical Unit is in process of becoming ready - 0% Edited October 9, 2010 by atakli Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted October 9, 2010 Share Posted October 9, 2010 Why are you using Patin Couffin for the I/O Interface? Switch back to SPTI. Then give this a read: http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
Recommended Posts