maxplant8 Posted October 13, 2010 Posted October 13, 2010 Writing a DVD+R DL disk (TDK) all went well but the disk failed to be finalised. It will play on my computer but not thru a regular (region free) DVD player. Is there some way I can get ImgBurn to finalise the disk -- I hoped verifying it might do the trick, but all was verified and declared ok, without a successful finalisation. Can anyone suggest a solution?
LIGHTNING UK! Posted October 13, 2010 Posted October 13, 2010 If the drive couldn't finalise it the first 4 or so times ImgBurn tried, it's probably not going to work now. Verifying doesn't magically fix anything. Post the log of the failed burn and we'll take a look.
maxplant8 Posted October 13, 2010 Author Posted October 13, 2010 (edited) The log: I 13:52:13 ImgBurn Version 2.5.2.0 started! I 13:52:13 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 13:52:13 Total Physical Memory: 8,379,380 KB - Available: 6,485,064 KB I 13:52:13 Initialising SPTI... I 13:52:13 Searching for SCSI / ATAPI devices... I 13:52:13 -> Drive 1 - Info: HL-DT-ST BD-RE BH20N B103 (F:) (ATAPI) I 13:52:13 Found 1 BD-RE! I 13:53:10 Operation Started! I 13:53:10 Source File: C:\DOWN_BY_LAW_DISC1\DownByLaw.mds I 13:53:10 Source File Sectors: 4,132,800 (MODE1/2048) I 13:53:10 Source File Size: 8,463,974,400 bytes I 13:53:10 Source File Volume Identifier: Down By Law Disc 1 I 13:53:10 Source File Volume Set Identifier: 3D4BA194003F0FB0 I 13:53:10 Source File Application Identifier: IMGBURN V2.5.2.0 - THE ULTIMATE IMAGE BURNER! I 13:53:10 Source File Implementation Identifier: ImgBurn I 13:53:10 Source File File System(s): ISO9660, UDF (1.02) I 13:53:10 Destination Device: [0:0:0] HL-DT-ST BD-RE BH20N B103 (F:) (ATAPI) I 13:53:10 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x) I 13:53:10 Destination Media Sectors: 4,173,824 I 13:53:10 Write Mode: DVD I 13:53:10 Write Type: DAO I 13:53:10 Write Speed: MAX I 13:53:10 Link Size: Auto I 13:53:10 Lock Volume: Yes I 13:53:10 Test Mode: No I 13:53:10 OPC: No I 13:53:10 BURN-Proof: Enabled I 13:53:10 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 13:53:10 Book Type Setting: N/A I 13:53:10 Optimal L0 Data Zone Capacity: 2,066,400 I 13:53:10 Optimal L0 Data Zone Method: Copied From Original Disc I 13:53:45 Set L0 Data Zone Capacity Succeeded! I 13:53:45 Filling Buffer... (40 MB) I 13:53:46 Writing LeadIn... I 13:53:48 Writing Session 1 of 1... (1 Track, LBA: 0 - 4132799) I 13:53:48 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4132799) I 13:53:48 Writing Layer 0... (LBA: 0 - 2066399) I 14:06:43 Writing Layer 1... (LBA: 2066400 - 4132799) I 14:19:39 Synchronising Cache... I 14:19:40 Closing Track... W 14:24:59 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 14:24:59 Close Track Failed! - Reason: Program Memory Area Update Failure W 14:24:59 Retrying (1 of 3)... I 14:27:40 Finalising Disc... W 14:30:45 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 14:30:45 Finalise Disc Failed! - Reason: Program Memory Area Update Failure W 14:30:45 Retrying (1 of 3)... I 14:31:12 Exporting Graph Data... I 14:31:12 Graph Data File: C:\Users\k\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH20N_B103_WEDNESDAY-13-OCTOBER-2010_1-53_PM_RITEK-S04-66_MAX.ibg I 14:31:12 Export Successfully Completed! I 14:31:12 Operation Successfully Completed! - Duration: 00:38:01 I 14:31:12 Average Write Rate: 5,329 KB/s (3.8x) - Maximum Write Rate: 5,590 KB/s (4.0x) I 14:31:12 Cycling Tray before Verify... W 14:36:00 Waiting for device to become ready... W 14:38:33 Device Removal Detected! W 14:38:33 The device list will be refreshed at the next available opportunity. I 14:42:43 Abort Request Acknowledged E 14:42:43 Device Not Ready - Reason: Access is denied. E 14:42:43 Operation Aborted! E 14:43:02 Failed to unlock drive from exclusive access. E 14:43:02 Reason: Access is denied. E 14:43:20 CreateFile Failed! - Device: '\\?\ide#cdromhl-dt-st_bd-re__bh20n___________________b103____#4&d7db6a6&0&0.0.0#{53f56308-b6bf-11d0-94f2-00a0c91efb8b}' E 14:43:20 Reason: The system cannot find the file specified. I 14:43:21 Searching for SCSI / ATAPI devices... W 14:43:21 No devices detected! I 14:43:49 Close Request Acknowledged I 14:43:49 Closing Down... I 14:43:49 Shutting down SPTI... I 14:43:49 ImgBurn closed! Additional comment: For no reason I can figure the disk created will not play on all computers and, as reported in my earlier post, will not play on my regular (Pioneer) DVD player. However, it does play on a JVC "DVD Video Recorder & Video Cassette Recorder". The only reason I can imagine is that the latter will play non-finalised disks recorded on it (but it won't finalise this one, I tried). Edited October 13, 2010 by maxplant8
LIGHTNING UK! Posted October 13, 2010 Posted October 13, 2010 http://forum.imgburn.com/index.php?showtopic=8000 Did you buy that burner or did it come in your PC? Just wondering if it's branded by someone or who made your PC. The only firmware update I could find was C106 but that's just for Dell machines.
maxplant8 Posted October 13, 2010 Author Posted October 13, 2010 The Blu-ray burner came with a Dell PC and the fault could well lie with the software there. I'll check it out when I have time (probably not before tomorrow). I thought I had the latest updates, but it is possible I don't. The software appears to be Cyberlink PowerDVD (Bluray).
LIGHTNING UK! Posted October 13, 2010 Posted October 13, 2010 Ah so it is Dell.... install C106 then http://www.firmwarehq.com/LG/BH20N/files.html
maxplant8 Posted October 14, 2010 Author Posted October 14, 2010 Update software installed and burn apparently successful. However, the burnt disk will not play in my regular DVD player, tho it will paly in another machine that is a DVD recorder. The only new thought I have is that I am using DVD+R but I can't see why that shoudl be a problem.
LIGHTNING UK! Posted October 14, 2010 Posted October 14, 2010 Do you have a log of you burning and verifying the disc? It is DVD Video content that you're burning yeah? I assume it's not an NTSC / PAL issue? Does the player the disc doesn't work in give you any sort of error message?
Recommended Posts