zeromx Posted October 20, 2010 Posted October 20, 2010 (edited) Hello everyone, I usually burn dual layer .ISO files and sometimes i get Power Calibration Area Error or 'WaitImmediateIO' Deferred Error - (99%, 0/3), below is a log of a sucessful burn BUT once it reachs the final stages of the burn it takes a couple of tries before it can complete it. the firmware of the drive is update to and i ONLY use VERBATIM DVD+DL, maybe i need a new drive im thinking...? I 20:17:36 ImgBurn Version 2.5.1.0 started! I 20:17:36 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 20:17:36 Total Physical Memory: 6,282,360 KB - Available: 4,618,032 KB I 20:17:36 Initialising SPTI... I 20:17:36 Searching for SCSI / ATAPI devices... I 20:17:36 -> Drive 1 - Info: Optiarc DVD RW AD-7241S 1.03 (E:) (ATA) I 20:17:36 Found 1 DVD±RW/RAM! I 20:17:56 Operation Started! I 20:17:56 Source File: F:\mvl-l4d2.dvd I 20:17:56 Source File Sectors: 3,827,488 (MODE1/2048) I 20:17:56 Source File Size: 7,838,695,424 bytes I 20:17:56 Source File Volume Identifier: DVD_ROM I 20:17:56 Source File Volume Set Identifier: f27dc000MS UDFBridge I 20:17:56 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 20:17:56 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 20:17:56 Source File File System(s): ISO9660, UDF (1.50) I 20:17:56 Destination Device: [1:1:0] Optiarc DVD RW AD-7241S 1.03 (E:) (ATA) I 20:17:56 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x) I 20:17:56 Destination Media Sectors: 4,173,824 I 20:17:56 Write Mode: DVD I 20:17:56 Write Type: DAO I 20:17:56 Write Speed: 1x I 20:17:56 Link Size: Auto I 20:17:56 Lock Volume: Yes I 20:17:56 Test Mode: No I 20:17:56 OPC: No I 20:17:56 BURN-Proof: Enabled W 20:17:56 Write Speed Miscompare! - Wanted: 1,385 KB/s (1x), Got: 5,540 KB/s (4x) I 20:17:56 Book Type Setting: DVD-ROM I 20:17:56 Optimal L0 Data Zone Capacity: 1,913,760 I 20:17:56 Optimal L0 Data Zone Method: Copied From Original Disc I 20:18:05 Set L0 Data Zone Capacity Succeeded! I 20:18:06 Filling Buffer... (40 MB) I 20:18:07 Writing LeadIn... I 20:18:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 20:18:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 20:18:11 Writing Layer 0... (LBA: 0 - 1913759) I 20:30:14 Writing Layer 1... (LBA: 1913760 - 3827487) I 20:42:22 Synchronising Cache... I 20:42:23 Closing Track... I 20:42:36 Finalising Disc... W 20:43:54 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Power Calibration Area Error W 20:43:54 Finalise Disc Failed! - Reason: Power Calibration Area Error W 20:43:54 Retrying (1 of 3)... W 20:46:17 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Power Calibration Area Error W 20:46:17 Retry Failed - Reason: Power Calibration Area Error W 20:46:17 Retrying (2 of 3)... I 20:47:42 Exporting Graph Data... I 20:47:42 Graph Data File: C:\Users\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7241S_1.03_20-OCTOBER-2010_20-17_MKM-003-00_1x.ibg I 20:47:42 Export Successfully Completed! I 20:47:42 Operation Successfully Completed! - Duration: 00:29:42 I 20:47:42 Average Write Rate: 5,279 KB/s (3.8x) - Maximum Write Rate: 6,158 KB/s (4.4x) Edited October 20, 2010 by zeromx
Rincewind Posted October 20, 2010 Posted October 20, 2010 Do you have the same issue with SL discs? Perhaps cleaning the drive might be in order. I don't know whether or not enabling OPC would make any difference, (LUK could answer that for you), though I personally always turn it on.
LIGHTNING UK! Posted October 20, 2010 Posted October 20, 2010 Your version of ImgBurn is out of date. You realise 1x isn't an option with your drive/firmware/media combo yeah? 1x will just make your drive use 4x. You could try the other supported speeds - 6x and 8x. Can you try a disc from a different spindle?
zeromx Posted October 20, 2010 Author Posted October 20, 2010 (edited) Do you have the same issue with SL discs? Perhaps cleaning the drive might be in order. I don't know whether or not enabling OPC would make any difference, (LUK could answer that for you), though I personally always turn it on. Hi, Im very noobish at this stuff. I assume SL is Single Layer discs, if so yes they burn fine, no issues. i have no idea what OPC and where to enable it nor what it does, after some forum search alot of word about booktype, not sure if that does anything???????? @ LIGHTNING UK! - will get on those, and let know how it goes. Thanks everyone for the quick reply. UPDATE: just tried again and it failed!!!...while i was waiting for an reply. I 21:02:22 ImgBurn Version 2.5.1.0 started! I 21:02:22 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 21:02:22 Total Physical Memory: 6,282,360 KB - Available: 4,846,756 KB I 21:02:22 Initialising SPTI... I 21:02:22 Searching for SCSI / ATAPI devices... I 21:02:22 -> Drive 1 - Info: Optiarc DVD RW AD-7241S 1.03 (E:) (ATA) I 21:02:22 Found 1 DVD±RW/RAM! I 21:07:03 Operation Started! I 21:07:03 Source File: F:\mvl-blur.dvd I 21:07:03 Source File Sectors: 3,827,488 (MODE1/2048) I 21:07:03 Source File Size: 7,838,695,424 bytes I 21:07:03 Source File Volume Identifier: DVD_ROM I 21:07:03 Source File Volume Set Identifier: ec67c000MS UDFBridge I 21:07:03 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:07:03 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 21:07:03 Source File File System(s): ISO9660, UDF (1.50) I 21:07:03 Destination Device: [1:1:0] Optiarc DVD RW AD-7241S 1.03 (E:) (ATA) I 21:07:03 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x) I 21:07:03 Destination Media Sectors: 4,173,824 I 21:07:03 Write Mode: DVD I 21:07:03 Write Type: DAO I 21:07:03 Write Speed: 1x I 21:07:03 Link Size: Auto I 21:07:03 Lock Volume: Yes I 21:07:03 Test Mode: No I 21:07:03 OPC: No I 21:07:03 BURN-Proof: Enabled W 21:07:03 Write Speed Miscompare! - Wanted: 1,385 KB/s (1x), Got: 5,540 KB/s (4x) I 21:07:03 Book Type Setting: DVD-ROM I 21:07:03 Optimal L0 Data Zone Capacity: 1,913,760 I 21:07:03 Optimal L0 Data Zone Method: Copied From Original Disc I 21:07:12 Set L0 Data Zone Capacity Succeeded! I 21:07:13 Filling Buffer... (40 MB) I 21:07:13 Writing LeadIn... I 21:07:18 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 21:07:18 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 21:07:18 Writing Layer 0... (LBA: 0 - 1913759) I 21:19:17 Writing Layer 1... (LBA: 1913760 - 3827487) I 21:31:25 Synchronising Cache... I 21:31:27 Closing Track... I 21:31:40 Finalising Disc... W 21:32:42 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Power On, Reset, or Bus Device Reset Occurred W 21:32:42 Finalise Disc Failed! - Reason: Power On, Reset, or Bus Device Reset Occurred W 21:32:42 Retrying (1 of 3)... W 21:32:42 Retry Failed - Reason: Logical Unit is in process of becoming ready W 21:32:42 Retrying (2 of 3)... W 21:32:42 Retry Failed - Reason: Logical Unit is in process of becoming ready W 21:32:42 Retrying (3 of 3)... W 21:32:42 Retry Failed - Reason: Logical Unit is in process of becoming ready E 21:32:50 Finalise Disc Failed! - Reason: Power On, Reset, or Bus Device Reset Occurred E 21:32:50 Failed to Write Image! I 21:32:53 Exporting Graph Data... I 21:32:53 Graph Data File: C:\Users\M88W7\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7241S_1.03_20-OCTOBER-2010_21-07_MKM-003-00_1x.ibg I 21:32:53 Export Successfully Completed! E 21:32:53 Operation Failed! - Duration: 00:25:46 I 21:32:53 Average Write Rate: 5,290 KB/s (3.8x) - Maximum Write Rate: 6,113 KB/s (4.4x) Edited October 20, 2010 by zeromx
Rincewind Posted October 20, 2010 Posted October 20, 2010 (edited) Checking for an update to your drive's firmware is a good idea. Go to Tools -> Drive -> and click on Check For Firmware Updates... Edited October 20, 2010 by Rincewind
zeromx Posted October 20, 2010 Author Posted October 20, 2010 (edited) - I updated IMGBURN to 2.5.2.0 - check drive FW, which is 1.03 (latest version) - set speed to 4x which was optimal - tried from a fresh spindle of discs (verbatim DVD+DL - FAILED AGAIN!. log.txt I 21:35:49 ImgBurn Version 2.5.2.0 started! I 21:35:49 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 21:35:49 Total Physical Memory: 6,282,360 KB - Available: 4,687,208 KB I 21:35:49 Initialising SPTI... I 21:35:49 Searching for SCSI / ATAPI devices... I 21:35:49 -> Drive 1 - Info: Optiarc DVD RW AD-7241S 1.03 (E:) (ATA) I 21:35:49 Found 1 DVD±RW/RAM! I 21:37:39 Operation Started! I 21:37:39 Source File: F:\mvl-blur.dvd I 21:37:39 Source File Sectors: 3,827,488 (MODE1/2048) I 21:37:39 Source File Size: 7,838,695,424 bytes I 21:37:39 Source File Volume Identifier: DVD_ROM I 21:37:39 Source File Volume Set Identifier: ec67c000MS UDFBridge I 21:37:39 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:37:39 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 21:37:39 Source File File System(s): ISO9660, UDF (1.50) I 21:37:39 Destination Device: [1:1:0] Optiarc DVD RW AD-7241S 1.03 (E:) (ATA) I 21:37:39 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x) I 21:37:39 Destination Media Sectors: 4,173,824 I 21:37:39 Write Mode: DVD I 21:37:39 Write Type: DAO I 21:37:39 Write Speed: 4x I 21:37:39 Link Size: Auto I 21:37:39 Lock Volume: Yes I 21:37:39 Test Mode: No I 21:37:39 OPC: No I 21:37:39 BURN-Proof: Enabled I 21:37:39 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 21:37:39 Book Type Setting: DVD-ROM I 21:37:39 Optimal L0 Data Zone Capacity: 1,913,760 I 21:37:39 Optimal L0 Data Zone Method: Copied From Original Disc I 21:37:45 Set L0 Data Zone Capacity Succeeded! I 21:37:45 Filling Buffer... (40 MB) I 21:37:45 Writing LeadIn... I 21:37:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 21:37:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 21:37:50 Writing Layer 0... (LBA: 0 - 1913759) I 21:49:49 Writing Layer 1... (LBA: 1913760 - 3827487) I 22:01:58 Synchronising Cache... I 22:01:59 Closing Track... I 22:02:12 Finalising Disc... W 22:02:46 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Power On, Reset, or Bus Device Reset Occurred W 22:02:46 Finalise Disc Failed! - Reason: Power On, Reset, or Bus Device Reset Occurred W 22:02:46 Retrying (1 of 3)... W 22:02:46 Retry Failed - Reason: Logical Unit is in process of becoming ready W 22:02:46 Retrying (2 of 3)... W 22:02:46 Retry Failed - Reason: Logical Unit is in process of becoming ready W 22:02:46 Retrying (3 of 3)... W 22:02:46 Retry Failed - Reason: Logical Unit is in process of becoming ready E 22:10:45 Finalise Disc Failed! - Reason: Power On, Reset, or Bus Device Reset Occurred E 22:10:45 Failed to Write Image! I 22:10:50 Exporting Graph Data... I 22:10:50 Graph Data File: C:\Users\M88W7\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7241S_1.03_20-OCTOBER-2010_21-37_MKM-003-00_4x.ibg I 22:10:50 Export Successfully Completed! E 22:10:50 Operation Failed! - Duration: 00:33:06 I 22:10:50 Average Write Rate: 5,286 KB/s (3.8x) - Maximum Write Rate: 6,113 KB/s (4.4x) So im guessing i might as well start looking for a new drive. Edited October 20, 2010 by zeromx
ianymaty Posted October 20, 2010 Posted October 20, 2010 Did you tryed as LIGHTNING UK! sugested with the other supported speeds - 6x and 8x? Do you have the latest chipset drivers installed?
zeromx Posted October 20, 2010 Author Posted October 20, 2010 Did you tryed as LIGHTNING UK! sugested with the other supported speeds - 6x and 8x? Do you have the latest chipset drivers installed? When you say "latest chipset" you are talking about motherboard drivers correct? or the latest firmware for the drive?.. Yes, i tried 6x its hit or miss situation, i just think my drive has had it, when i first got it was fine for about 8months, only recently starting acting up...
ianymaty Posted October 20, 2010 Posted October 20, 2010 Yes I'm talking about motherboard chipset. Take a look on manufacturer site or if you know what chipset is on your motherboard search for the latest for your OS. This site may come handy http://www.ma-config.com/
zeromx Posted October 20, 2010 Author Posted October 20, 2010 Yes I'm talking about motherboard chipset. Take a look on manufacturer site or if you know what chipset is on your motherboard search for the latest for your OS. This site may come handy http://www.ma-config.com/ Yes all my drivers are up to date!..I just think my drive has had its time, i dont want to waste anymore discs!.
Cynthia Posted October 20, 2010 Posted October 20, 2010 Where are the discs made? Should be stated on the package.
zeromx Posted October 21, 2010 Author Posted October 21, 2010 (edited) UPDATE Today i purchased a Pioneer DVR-218L and now everything works fine. smooth burning with no retries. thanks for all your support. Edited October 21, 2010 by zeromx
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now