skj Posted October 24, 2010 Share Posted October 24, 2010 My DVD Burner/Reader is a LG GSA-H73N, and I have confirmed that I am using the latest firmware of C109 of 11/4/09. I have always been able to burn the regular DVD-R 4GB discs fine, however, I recently purchased DVD-R DL (dual layer) 4X blanks from Princo. When I run the burn in Test mode, it's fine. However, when I try to burn the actual disc, I get this error mesg: I/O Error: Device: [1:00] HL-DT-ST DVD+-RW GSA-H73N C109 (F:) (ATA) ScsiStatus:0x02 Interpretation: Check Condition CDB: 2A 00 00 22 E1 60 00 00 20 00 Interpretation: Write (10) - Sectors: 2285920 - 2285951 Sense Area: 70 00 50 00 00 00 00 0E 00 00 00 21 02 00 00 00 00 Interpretation: Invalid Address For Write I have attached a screen shot. The mode that I am using is "Write files/folders to disc", and it's in "Build" mode. Can anyone please assist? Link to comment Share on other sites More sharing options...
Cynthia Posted October 24, 2010 Share Posted October 24, 2010 I have always been able to burn the regular DVD-R 4GB discs fine, however, I recently purchased DVD-R DL (dual layer) 4X blanks from Princo. I hope you are not going to burn DVD Video compliant material on those discs - you should get DVD +R DL media for that task. Your issue is that the burner doesn't like the media/brand of those discs. Princo was crap media when I used it in 2003/2004 and I would recommend you to get some decent ones. like Verbatim. Link to comment Share on other sites More sharing options...
Recommended Posts