Sussano Posted October 29, 2010 Posted October 29, 2010 Hey everyone. I'm well aware of the fact that Verbatim medias are the best and that I should only use those, but all the stores I went to ran out of these, so I bought Teac medias, which I was told should work. I gave a friend of mine one, and asked him to burn me Red Dead Redemptopn, which worked perfectly fine (Meaning - there's nothing wrong with the media). However, when I try burning one myself I can't get it to work - My Xbox just shows the 'Open Tray' message as if there's nothing inside. I've saet the layer break to 1913760 and closed every softwere I had running, which is, as far as I'm aware, what I should do to get things working. Here's the burn log: I 16:32:55 ImgBurn Version 2.5.2.0 started! I 16:32:55 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1) I 16:32:55 Total Physical Memory: 2,095,696 KB - Available: 1,208,976 KB W 16:32:55 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 16:32:55 Initialising SPTI... I 16:32:55 Searching for SCSI / ATAPI devices... I 16:32:55 -> Drive 1 - Info: HL-DT-ST DVDRAM GSA-H62N CL00 (D:) (ATA) I 16:32:55 -> Drive 2 - Info: BZ3633L PXZ302Y 1.0 (F:) (SCSI) I 16:32:55 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 16:46:43 Operation Started! I 16:46:43 Source File: C:\Users\Lior\Downloads\dnl-brl.dvd I 16:46:43 Source File Sectors: 3,827,488 (MODE1/2048) I 16:46:43 Source File Size: 7,838,695,424 bytes I 16:46:43 Source File Volume Identifier: DVD_ROM I 16:46:43 Source File Volume Set Identifier: 356fc000MS UDFBridge I 16:46:43 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 16:46:43 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 16:46:43 Source File File System(s): ISO9660, UDF (1.50) I 16:46:43 Destination Device: [3:0:0] HL-DT-ST DVDRAM GSA-H62N CL00 (D:) (ATA) I 16:46:43 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D03-64) (Speeds: 2.4x, 4x) I 16:46:43 Destination Media Sectors: 3,827,520 I 16:46:43 Write Mode: DVD I 16:46:43 Write Type: DAO I 16:46:43 Write Speed: 2.4x I 16:46:43 Link Size: Auto I 16:46:43 Lock Volume: Yes I 16:46:43 Test Mode: No I 16:46:43 OPC: No I 16:46:43 BURN-Proof: Enabled I 16:46:43 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 16:46:43 Book Type Setting: DVD-ROM I 16:46:43 User Specified L0 Data Zone Capacity: 1,913,760 I 16:46:43 Set L0 Data Zone Capacity Succeeded! I 16:46:43 Filling Buffer... (40 MB) I 16:46:44 Writing LeadIn... I 16:47:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 16:47:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 16:47:07 Writing Layer 0... (LBA: 0 - 1913759) I 17:06:45 Writing Layer 1... (LBA: 1913760 - 3827487) I 17:26:27 Synchronising Cache... I 17:26:28 Closing Track... I 17:26:30 Finalising Disc... W 17:26:44 Potential 'WaitImmediateIO' Deferred Error - (21%, 0/3) - Tracking Servo Failure W 17:26:44 Finalise Disc Failed! - Reason: Tracking Servo Failure W 17:26:44 Retrying (1 of 3)... I 17:26:45 Exporting Graph Data... I 17:26:45 Graph Data File: C:\Users\Lior\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-H62N_CL00_יום שישי-29-אוקטובר-2010_16-46_CMC_MAG-D03-64_2.4x.ibg I 17:26:45 Export Successfully Completed! I 17:26:45 Operation Successfully Completed! - Duration: 00:40:01 I 17:26:45 Average Write Rate: 3,245 KB/s (2.3x) - Maximum Write Rate: 3,358 KB/s (2.4x)
LIGHTNING UK! Posted October 29, 2010 Posted October 29, 2010 (Meaning - there's nothing wrong with the media) No, it just means your friend's drive doesn't have a problem burning 'CMC MAG-D03-64'. You could try the CL01 firmware update and using 4x rather than 2.4x. http://www.firmwarehq.com/LG/GSA-H62N/files.html Other than that, you're out of luck.
Sussano Posted October 30, 2010 Author Posted October 30, 2010 I tried 4x and it works well. Thanks a lot.
Recommended Posts