Davewagon Posted November 1, 2010 Posted November 1, 2010 Hi Guys, I don't like to sign up to a forum and immediatley ask for help with my first post, but I've had a good look around and can't seem to come across my problem ... Here goes ... I'm trying to make and xbox 360 disk and everything seems to be going smoothly until the point of the burn where ImgBurn will try to verify the disk. The disk tray opens and closes and then nothing ... there is a message stating that 'Medium is Not Present' and the program just sits and waits, I try to open and close the tray again but to no effect and have no option but to close/cancel the process. I tried this once, then read up on some issues which led me to update my burner's driver (I'm using an LG HL-DT-ST DVD-RAM GSA-H55L with firmware 1.06, I believe it should be fine for the purpose) The only thing i can think of is that it appears I have Verbatim MKM-003-00 disks which can burn at 8x, HOWEVER, I'm manually changing the write speed from AWS to 2.4x (as i've heard this is the magic speed, although maybe not anymore ??) As you can see from my log below, this leads to a "Miscompare" Edit: Just also noticed my book type is DVD-ROM, should this be DVD-RAM??, how do I change this if so? Any help is greatly appreciated. Many Thanks, Dave I 21:16:17 ImgBurn Version 2.5.2.0 started! I 21:16:17 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 21:16:17 Total Physical Memory: 2,095,196 KB - Available: 1,447,080 KB I 21:16:17 Initialising SPTI... I 21:16:17 Searching for SCSI / ATAPI devices... I 21:16:17 -> Drive 1 - Info: HL-DT-ST DVD-RAM GSA-H55L 1.06 (D:) (ATA) I 21:16:17 Found 1 DVD±RW/RAM! I 21:16:28 Operation Started! I 21:16:28 Source File: E:\xbox360\f12010.dvd I 21:16:28 Source File Sectors: 3,827,488 (MODE1/2048) I 21:16:28 Source File Size: 7,838,695,424 bytes I 21:16:28 Source File Volume Identifier: DVD_ROM I 21:16:28 Source File Volume Set Identifier: ec67c000MS UDFBridge I 21:16:28 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:16:28 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 21:16:28 Source File File System(s): ISO9660, UDF (1.50) I 21:16:28 Destination Device: [0:0:0] HL-DT-ST DVD-RAM GSA-H55L 1.06 (D:) (ATA) I 21:16:28 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x, 10x) I 21:16:28 Destination Media Sectors: 4,173,824 I 21:16:28 Write Mode: DVD I 21:16:28 Write Type: DAO I 21:16:28 Write Speed: 2.4x I 21:16:28 Link Size: Auto I 21:16:28 Lock Volume: Yes I 21:16:28 Test Mode: No I 21:16:28 OPC: No I 21:16:28 BURN-Proof: Enabled W 21:16:28 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) I 21:16:28 Book Type Setting: DVD-ROM I 21:16:28 Optimal L0 Data Zone Capacity: 1,913,760 I 21:16:28 Optimal L0 Data Zone Method: Copied From Original Disc I 21:16:28 Set L0 Data Zone Capacity Succeeded! I 21:16:29 Filling Buffer... (40 MB) I 21:16:29 Writing LeadIn... I 21:17:01 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 21:17:01 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 21:17:01 Writing Layer 0... (LBA: 0 - 1913759) I 21:29:38 Writing Layer 1... (LBA: 1913760 - 3827487) I 21:41:34 Synchronising Cache... I 21:41:56 Closing Track... I 21:42:32 Finalising Disc... I 21:42:45 Exporting Graph Data... I 21:42:45 Graph Data File: C:\Documents and Settings\Users\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GSA-H55L_1.06_31-OCTOBER-2010_21-16_MKM-003-00_2.4x.ibg I 21:42:45 Export Successfully Completed! I 21:42:45 Operation Successfully Completed! - Duration: 00:26:16 I 21:42:45 Average Write Rate: 5,200 KB/s (3.8x) - Maximum Write Rate: 5,618 KB/s (4.1x) I 21:42:45 Cycling Tray before Verify... W 21:42:56 Waiting for device to become ready... I 22:22:49 Abort Request Acknowledged E 22:22:49 Device Not Ready - Reason: Medium Not Present E 22:22:49 Operation Aborted! I 22:22:51 Close Request Acknowledged I 22:22:51 Closing Down... I 22:22:51 Shutting down SPTI... I 22:22:51 ImgBurn closed!
LIGHTNING UK! Posted November 1, 2010 Posted November 1, 2010 2 of the 3 'pinned' topics at the top of this forum are all you need.
Davewagon Posted November 1, 2010 Author Posted November 1, 2010 Hi Lightning, thanks for the reply, I had read them but have a couple of questions which I can't see the answer to (unless I'm being completely blind) Because I have Verb disks optimised for 8x write speeds, is that the speed I should use, should I specifically set 8x speed or leave it at AWS? Any suggestions re the DVD-ROM, DVD-RAM question? Wouldn't burning the .dvd file automatically set this in the same way it sets the layer break? Regards, Dave
LIGHTNING UK! Posted November 2, 2010 Posted November 2, 2010 AWS doesn't mean anything (beyond 'MAX' speed - notice it says the effective speed in brackets next to it) unless you actually configure the 'Automatic Write Speed' feature. There's a guide for that in the Guides forum. You should test all 'Supported' write speeds - as per instruction from the threads I linked to. Some/one may perform better than others and it's impossible for us to tell you which - every drive/firmware/media combo is different. No idea why you think it should say DVD-RAM. It's normal (and good) for it to be DVD-ROM. No, the book type setting has nothing to do with the .DVD file.
Recommended Posts