shane'o Posted November 4, 2010 Posted November 4, 2010 hi i have made a few working xbox 360 game backups but for the last few days it no longer works i have verified the image 3 times it is perfectly fine and i have tried to burn a few different images but once the burn is finished it wont verify and all my drives say the disk is blank i am including a log of one of the burns, this is the third time i am burning the same disk and it keeps coming back blank. do i need a new drive? i have destroyed 5 disks trying to fix this and i cant get it rite please help me. i have checked the disk once its done you can see it has been burnt but it still comes out blank on the pc.log.txt
LIGHTNING UK! Posted November 4, 2010 Posted November 4, 2010 http://forum.imgburn.com/index.php?showtopic=8000
shane'o Posted November 5, 2010 Author Posted November 5, 2010 I use hp disks i know they are not verbatim but i can not find verbatim disks at the best of times. i stay in south africa so your list of where to find these disks cant help me, hp disks have never given me a problem before it is only the last week that i have had trouble with burning games and five disks have not worked in a row are you positive it is the disks? the disks are hp DVD+R 8x. my drives firmware is fully up to date (this is what the drive update wizard said)
LIGHTNING UK! Posted November 5, 2010 Posted November 5, 2010 The thread tells you what you can try, there's no point in me repeating it. There's no magic fix, you just have to go through the stages and troubleshoot it yourself.
shane'o Posted November 7, 2010 Author Posted November 7, 2010 (edited) ok so i have done some testing and it isnt my drive or disks my friends pc burns these disks perfectly fine and it isnt my drive... when i check the disks it said that the layer break is not the same as what i set it to be in imgburn is their any way to fix this and even tho my images come back fine do you know of any other imaging software other than Schtrom360Xtractor just incase my abgx360 isnt working like it should? i dont understad i could backup disks till about a week and a half ago then one out of three would work and now none will work. Edited November 7, 2010 by shane'o
shane'o Posted November 7, 2010 Author Posted November 7, 2010 yes two so far and i have tried both my burners and another burner on my laptop.
ianymaty Posted November 7, 2010 Posted November 7, 2010 Are you fancy making an experiment? Move your drive to your friends computer and repeat the burn in the same conditions (your burner, your media, his computer).
shane'o Posted November 7, 2010 Author Posted November 7, 2010 (edited) i could try that just dont know if he will let me open his pc (think its still under garente) mabey i have settings wrong? because of both my pc and laptop give the same error but my friend burnt me 10 games with the same media in the last two days and it works perfectly. Edited November 7, 2010 by shane'o
shane'o Posted November 7, 2010 Author Posted November 7, 2010 trying to burn again and have noticed that it will only burn at 4X when i requested it to burn at 2.4X
ianymaty Posted November 7, 2010 Posted November 7, 2010 I wonder if your laptop drive is also a Samsung? Laptop drives are not so reliable anyway, regardless of brand. I 12:17:32 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D03-64) (Speeds: 4x, 6x, 8x) Have you tryed the other speeds? 2.4 isn't an option so try 6x or 8x. 4x was used already. Since you can't find Verbatim, at least, can you try with other brand of discs and MID/dye different from CMC that HP uses?
LIGHTNING UK! Posted November 7, 2010 Posted November 7, 2010 Yeah but he doesn't have your drive... you do. Something about your drive/firmware/media combo just isn't playing nicely.
shane'o Posted November 7, 2010 Author Posted November 7, 2010 i will try another brand of disk i have created a new image and this time it got half way through the verification and then gave an i/o error so i think it might be that the drive isnt reading the disk properly so it is not making a correct image. but it said the image is perfectly fine, here is a log from the last burn. I 09:56:45 ImgBurn Version 2.5.2.0 started! I 09:56:45 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 09:56:45 Total Physical Memory: 4,193,592 KB - Available: 2,711,296 KB W 09:56:45 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 09:56:45 Initialising SPTI... I 09:56:45 Searching for SCSI / ATAPI devices... I 09:56:45 -> Drive 1 - Info: DVDRW IDE 16X A091 (G:) (ATA) I 09:56:45 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S202N SB02 (F:) (ATA) I 09:56:45 -> Drive 3 - Info: LYBUN LM74XAZWTM3 3.5Z (J:) (SCSI) I 09:56:45 Found 1 DVD±RW, 1 DVD±RW/RAM and 1 BD-ROM! I 09:57:22 Operation Started! I 09:57:22 Source File: C:\Users\shane\Desktop\New folder\cod black ops.dvd I 09:57:22 Source File Sectors: 3,827,488 (MODE1/2048) I 09:57:22 Source File Size: 7,838,695,424 bytes I 09:57:22 Source File Volume Identifier: DVD_ROM I 09:57:22 Source File Volume Set Identifier: ec67c000MS UDFBridge I 09:57:22 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 09:57:22 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 09:57:22 Source File File System(s): ISO9660, UDF (1.50) I 09:57:22 Destination Device: [0:0:0] TSSTcorp CDDVDW SH-S202N SB02 (F:) (ATA) I 09:57:22 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D03-64) (Speeds: 4x, 6x, 8x) I 09:57:22 Destination Media Sectors: 4,173,824 I 09:57:22 Write Mode: DVD I 09:57:22 Write Type: DAO I 09:57:22 Write Speed: 2.4x I 09:57:22 Link Size: Auto I 09:57:22 Lock Volume: Yes I 09:57:22 Test Mode: No I 09:57:22 OPC: No I 09:57:22 BURN-Proof: Enabled W 09:57:22 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) I 09:57:22 Book Type Setting: DVD-ROM I 09:57:22 User Specified L0 Data Zone Capacity: 1,913,760 I 09:58:11 Set L0 Data Zone Capacity Succeeded! I 09:58:12 Filling Buffer... (40 MB) I 09:58:14 Writing LeadIn... I 09:58:16 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 09:58:16 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 09:58:16 Writing Layer 0... (LBA: 0 - 1913759) I 10:10:13 Writing Layer 1... (LBA: 1913760 - 3827487) I 10:22:13 Synchronising Cache... I 10:22:16 Closing Track... I 10:22:19 Finalising Disc... I 10:22:54 Exporting Graph Data... I 10:22:54 Graph Data File: C:\Users\shane\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S202N_SB02_SUNDAY-NOVEMBER-07-2010_9-57_AM_CMC_MAG-D03-64_2.4x.ibg I 10:22:54 Export Successfully Completed! I 10:22:54 Operation Successfully Completed! - Duration: 00:25:31 I 10:22:54 Average Write Rate: 5,330 KB/s (3.8x) - Maximum Write Rate: 5,570 KB/s (4.0x) I 10:22:54 Cycling Tray before Verify... W 10:23:01 Waiting for device to become ready... I 10:24:07 Device Ready! I 10:24:08 Operation Started! I 10:24:08 Source Device: [0:0:0] TSSTcorp CDDVDW SH-S202N SB02 (F:) (ATA) I 10:24:08 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: CMC MAG-D03-64) (Speeds: 4x, 6x, 8x) I 10:24:08 Image File: C:\Users\shane\Desktop\New folder\cod black ops.dvd I 10:24:08 Image File Sectors: 3,827,488 (MODE1/2048) I 10:24:08 Image File Size: 7,838,695,424 bytes I 10:24:08 Image File Volume Identifier: DVD_ROM I 10:24:08 Image File Volume Set Identifier: ec67c000MS UDFBridge I 10:24:08 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:24:08 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 10:24:08 Image File File System(s): ISO9660, UDF (1.50) I 10:24:08 Read Speed (Data/Audio): MAX / MAX I 10:24:08 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 10:24:08 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 10:24:08 Verifying Layer 0... (LBA: 0 - 1913759) I 10:29:48 Verifying Layer 1... (LBA: 1913760 - 3827487) W 10:30:13 Failed to Read Sector 1913760 - Reason: Timeout on Logical Unit W 10:36:15 Retrying (1)... W 10:36:24 Retry Failed - Reason: Timeout on Logical Unit W 10:36:26 Retrying (2)... W 10:36:36 Retry Failed - Reason: Timeout on Logical Unit W 10:36:38 Failed to Read Sector 1913760 - Reason: Timeout on Logical Unit E 10:36:56 Miscompare at LBA: 1913761, Offset: 0 E 10:36:56 Device: 0x46 E 10:36:56 Image File: 0xDC E 10:36:56 Total Errors in Sector: 2,040 E 10:36:56 Failed to Verify Sectors! I 10:36:58 Exporting Graph Data... I 10:36:58 Graph Data File: C:\Users\shane\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S202N_SB02_SUNDAY-NOVEMBER-07-2010_9-57_AM_CMC_MAG-D03-64_2.4x.ibg I 10:36:58 Export Successfully Completed! E 10:36:58 Operation Failed! - Duration: 00:12:48 I 10:36:58 Average Verify Rate: 4,983 KB/s (3.6x) - Maximum Verify Rate: 16,416 KB/s (11.9x)
shane'o Posted November 7, 2010 Author Posted November 7, 2010 ianymaty the laptop is a hp but the drive is a TSSTcorp which as far as i know is a samsung.
ianymaty Posted November 7, 2010 Posted November 7, 2010 It was a wild guess but you confirmed it. Could be a problem of Samsung drives/firmwares with CMC media. You said it's 8x rated media, why are you forcing it to burn 2.4x when this is not even an option? Give a try with 8x. And don't forget to try other media too. Don't rely on the fact that your computer is an HP and it should burn HP media.
shane'o Posted November 7, 2010 Author Posted November 7, 2010 back to old problem. this is the log for burn at 6X dose imgburn edit the .img or .DVD file in any way during burning? I 10:49:43 ImgBurn Version 2.5.2.0 started! I 10:49:43 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 10:49:43 Total Physical Memory: 4,193,592 KB - Available: 2,696,472 KB W 10:49:43 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 10:49:43 Initialising SPTI... I 10:49:43 Searching for SCSI / ATAPI devices... I 10:49:43 -> Drive 1 - Info: DVDRW IDE 16X A091 (G:) (ATA) I 10:49:43 -> Drive 2 - Info: TSSTcorp CDDVDW SH-S202N SB02 (F:) (ATA) I 10:49:43 -> Drive 3 - Info: LYBUN LM74XAZWTM3 3.5Z (J:) (SCSI) I 10:49:43 Found 1 DVD±RW, 1 DVD±RW/RAM and 1 BD-ROM! I 10:50:32 Operation Started! I 10:50:32 Source File: C:\Users\shane\Desktop\New folder\cod black ops.dvd I 10:50:32 Source File Sectors: 3,827,488 (MODE1/2048) I 10:50:32 Source File Size: 7,838,695,424 bytes I 10:50:32 Source File Volume Identifier: DVD_ROM I 10:50:32 Source File Volume Set Identifier: ec67c000MS UDFBridge I 10:50:32 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:50:32 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 10:50:32 Source File File System(s): ISO9660, UDF (1.50) I 10:50:32 Destination Device: [0:0:0] TSSTcorp CDDVDW SH-S202N SB02 (F:) (ATA) I 10:50:32 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D03-64) (Speeds: 4x, 6x, 8x) I 10:50:32 Destination Media Sectors: 4,173,824 I 10:50:32 Write Mode: DVD I 10:50:32 Write Type: DAO I 10:50:32 Write Speed: 6x I 10:50:32 Link Size: Auto I 10:50:32 Lock Volume: Yes I 10:50:32 Test Mode: No I 10:50:32 OPC: No I 10:50:32 BURN-Proof: Enabled I 10:50:32 Write Speed Successfully Set! - Effective: 8,310 KB/s (6x) I 10:50:32 Book Type Setting: DVD-ROM I 10:50:32 User Specified L0 Data Zone Capacity: 1,913,760 I 10:50:52 Set L0 Data Zone Capacity Succeeded! I 10:50:52 Filling Buffer... (40 MB) I 10:50:54 Writing LeadIn... I 10:51:10 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 10:51:10 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 10:51:10 Writing Layer 0... (LBA: 0 - 1913759) I 10:59:57 Writing Layer 1... (LBA: 1913760 - 3827487) I 11:07:55 Synchronising Cache... I 11:08:27 Closing Track... I 11:08:30 Finalising Disc... I 11:09:01 Exporting Graph Data... I 11:09:01 Graph Data File: C:\Users\shane\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-S202N_SB02_SUNDAY-NOVEMBER-07-2010_10-50_AM_CMC_MAG-D03-64_6x.ibg I 11:09:01 Export Successfully Completed! I 11:09:01 Operation Successfully Completed! - Duration: 00:18:28 I 11:09:01 Average Write Rate: 7,616 KB/s (5.5x) - Maximum Write Rate: 8,347 KB/s (6.0x) I 11:09:01 Cycling Tray before Verify... W 11:09:09 Waiting for device to become ready... I 11:09:35 Device Ready! E 11:09:37 Verify Failed! - Reason: Layouts do not match.
shane'o Posted November 7, 2010 Author Posted November 7, 2010 when i burn the disks at 8X and i check under the disk it isnt one solid colour the first layar is 95% to the end of the disk and the second layar is 20% to the end of the disk. iv tried 8X 4X 2.4X and now 6X. i could try with my other drive but it dosnt even begin to write before it says burning failed it gets to about 50% with other burning software but then dose the same thing. it is a sahara drive (DVDRW IDE 16X ATA)i dont think it is compatible with imgburn.
shane'o Posted November 7, 2010 Author Posted November 7, 2010 It was a wild guess but you confirmed it. Could be a problem of Samsung drives/firmwares with CMC media. You said it's 8x rated media, why are you forcing it to burn 2.4x when this is not even an option? Give a try with 8x. And don't forget to try other media too. Don't rely on the fact that your computer is an HP and it should burn HP media. i only used the laptop to test if its only my pc but for all the logs i have posted they are from my normal pc.
Recommended Posts