mizzy Posted November 6, 2010 Posted November 6, 2010 Hey everyone, if you could help me with these problems thank you.. Everytime i try to burn at first it tells me Failed to set L0 data zone capacity. If I click continue it goes all the way through then it says Failed to Sychronize Chache, then after that it fails to finalise the disc here is my log: I 12:08:38 ImgBurn Version 2.5.2.0 started! I 12:08:38 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 12:08:38 Total Physical Memory: 1,963,856 KB - Available: 1,165,996 KB I 12:08:38 Initialising SPTI... I 12:08:38 Searching for SCSI / ATAPI devices... I 12:08:38 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH10L FC09 (E:) (Fibre) I 12:08:38 Found 1 DVD±RW/RAM! I 12:11:59 Operation Started! I 12:11:59 Source File: C:\Users\user\Desktop\xb360cbo\XB360CBO.dvd I 12:11:59 Source File Sectors: 3,827,488 (MODE1/2048) I 12:11:59 Source File Size: 7,838,695,424 bytes I 12:11:59 Source File Volume Identifier: DVD_ROM I 12:11:59 Source File Volume Set Identifier: ec67c000MS UDFBridge I 12:11:59 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 12:11:59 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 12:11:59 Source File File System(s): ISO9660, UDF (1.50) I 12:11:59 Destination Device: [2:0:0] HL-DT-ST DVD-RAM GH10L FC09 (E:) (Fibre) I 12:11:59 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x) I 12:11:59 Destination Media Sectors: 4,173,824 I 12:11:59 Write Mode: DVD I 12:11:59 Write Type: DAO I 12:11:59 Write Speed: 2.4x I 12:11:59 Link Size: Auto I 12:11:59 Lock Volume: Yes I 12:11:59 Test Mode: No I 12:11:59 OPC: Yes I 12:11:59 BURN-Proof: Enabled I 12:11:59 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x) I 12:11:59 Book Type Setting: DVD-ROM I 12:12:11 Optimal L0 Data Zone Capacity: 1,913,760 I 12:12:11 Optimal L0 Data Zone Method: Copied From Original Disc W 12:12:52 Set L0 Data Zone Capacity Failed! - Reason: Program Memory Area Update Failure I 12:12:53 Filling Buffer... (40 MB) I 12:12:53 Writing LeadIn... I 12:13:34 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 12:13:34 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 12:13:34 Writing Layer 0... (LBA: 0 - 1913759) I 12:33:12 Writing Layer 1... (LBA: 1913760 - 3827487) I 12:52:58 Synchronising Cache... W 12:54:19 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 12:54:19 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure W 12:54:19 Retrying (1 of 3)... W 12:55:22 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 12:55:22 Retry Failed - Reason: Program Memory Area Update Failure W 12:55:22 Retrying (2 of 3)... W 12:56:31 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 12:56:31 Retry Failed - Reason: Program Memory Area Update Failure W 12:56:31 Retrying (3 of 3)... W 12:56:55 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Is Full W 12:56:55 Retry Failed - Reason: Program Memory Area Is Full W 13:09:44 Retrying (4)... W 13:09:45 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Is Full W 13:09:45 Retry Failed - Reason: Program Memory Area Is Full W 13:09:51 Retrying (5)... W 13:09:52 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Is Full W 13:09:52 Retry Failed - Reason: Program Memory Area Is Full W 13:11:54 Retrying (6)... W 13:11:55 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Is Full W 13:11:55 Retry Failed - Reason: Program Memory Area Is Full I 13:12:00 Closing Track... I 13:12:01 Finalising Disc... W 13:12:14 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error - Incomplete Track in Session W 13:12:14 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session W 13:12:14 Retrying (1 of 3)... W 13:12:19 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error - Incomplete Track in Session W 13:12:19 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 13:12:19 Retrying (2 of 3)... W 13:12:24 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error - Incomplete Track in Session W 13:12:24 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 13:12:24 Retrying (3 of 3)... W 13:12:29 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error - Incomplete Track in Session W 13:12:29 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 13:12:33 Retrying (4)... W 13:12:36 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error - Incomplete Track in Session W 13:12:36 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session I 13:12:50 Exporting Graph Data... I 13:12:50 Graph Data File: C:\Users\user\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH10L_FC09_SATURDAY-NOVEMBER-06-2010_12-11_PM_RITEK-S04-66_2.4x.ibg I 13:12:50 Export Successfully Completed! I 13:12:50 Operation Successfully Completed! - Duration: 01:00:50 I 13:12:50 Average Write Rate: 3,239 KB/s (2.3x) - Maximum Write Rate: 3,365 KB/s (2.4x)
LIGHTNING UK! Posted November 6, 2010 Posted November 6, 2010 http://forum.imgburn.com/index.php?showtopic=8000
mizzy Posted November 6, 2010 Author Posted November 6, 2010 So your pretty much saying verbatim FTW!!! so i need to go buy some verbatim discs and it will fix my problem?
ianymaty Posted November 6, 2010 Posted November 6, 2010 That is not a certain thing that will fix your problem. It's the last attempt to know if your drive is still alive. If a drive can't burn correctly a Verbatim, it is considered dead (junk) and needs replacement.
mizzy Posted November 7, 2010 Author Posted November 7, 2010 Alright guys it didn't work... Still says cant set L0 data zone capacity.
mizzy Posted November 7, 2010 Author Posted November 7, 2010 Ok i changed the I/O interface put a disk in, Didnt work, But right when i hit cancel i went back changed it back to microsofts and hit write it suceeded. So i don't know what i did. Here is the log: I 09:59:10 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH10L FC09 (E:) (Fibre) I 09:59:10 Found 1 DVD±RW/RAM! I 09:59:14 Operation Started! I 09:59:14 Source File: C:\Users\user\Desktop\xb360cbo\XB360CBO.dvd I 09:59:14 Source File Sectors: 3,827,488 (MODE1/2048) I 09:59:14 Source File Size: 7,838,695,424 bytes I 09:59:14 Source File Volume Identifier: DVD_ROM I 09:59:14 Source File Volume Set Identifier: ec67c000MS UDFBridge I 09:59:14 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 09:59:14 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 09:59:14 Source File File System(s): ISO9660, UDF (1.50) I 09:59:14 Destination Device: [2:0:0] HL-DT-ST DVD-RAM GH10L FC09 (E:) (Fibre) I 09:59:14 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 09:59:14 Destination Media Sectors: 3,827,520 I 09:59:14 Write Mode: DVD I 09:59:14 Write Type: DAO I 09:59:14 Write Speed: 2x I 09:59:14 Link Size: Auto I 09:59:14 Lock Volume: Yes I 09:59:14 Test Mode: No I 09:59:14 OPC: Yes I 09:59:14 BURN-Proof: Enabled W 09:59:26 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 5,540 KB/s (4x) W 09:59:26 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 5,540 KB/s (4x) W 09:59:26 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 5,540 KB/s (4x) W 09:59:26 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x) / 5,540 KB/s (4x) I 09:59:26 Book Type Setting: DVD-ROM I 09:59:26 User Specified L0 Data Zone Capacity: 1,913,760 I 09:59:26 Set L0 Data Zone Capacity Succeeded! I 09:59:26 Filling Buffer... (40 MB) I 09:59:27 Writing LeadIn... I 10:00:06 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 10:00:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 10:00:06 Writing Layer 0... (LBA: 0 - 1913759) Thats from where it was at at 3% done.
mizzy Posted November 7, 2010 Author Posted November 7, 2010 Alright i got this at 68% I 09:59:10 -> Drive 1 - Info: HL-DT-ST DVD-RAM GH10L FC09 (E:) (Fibre) I 09:59:10 Found 1 DVD±RW/RAM! I 09:59:14 Operation Started! I 09:59:14 Source File: C:\Users\user\Desktop\xb360cbo\XB360CBO.dvd I 09:59:14 Source File Sectors: 3,827,488 (MODE1/2048) I 09:59:14 Source File Size: 7,838,695,424 bytes I 09:59:14 Source File Volume Identifier: DVD_ROM I 09:59:14 Source File Volume Set Identifier: ec67c000MS UDFBridge I 09:59:14 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 09:59:14 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 09:59:14 Source File File System(s): ISO9660, UDF (1.50) I 09:59:14 Destination Device: [2:0:0] HL-DT-ST DVD-RAM GH10L FC09 (E:) (Fibre) I 09:59:14 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 09:59:14 Destination Media Sectors: 3,827,520 I 09:59:14 Write Mode: DVD I 09:59:14 Write Type: DAO I 09:59:14 Write Speed: 2x I 09:59:14 Link Size: Auto I 09:59:14 Lock Volume: Yes I 09:59:14 Test Mode: No I 09:59:14 OPC: Yes I 09:59:14 BURN-Proof: Enabled W 09:59:26 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 5,540 KB/s (4x) W 09:59:26 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 5,540 KB/s (4x) W 09:59:26 Write Speed Miscompare! - MODE SENSE: 3,324 KB/s (2.4x), GET PERFORMANCE: 5,540 KB/s (4x) W 09:59:26 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x) / 5,540 KB/s (4x) I 09:59:26 Book Type Setting: DVD-ROM I 09:59:26 User Specified L0 Data Zone Capacity: 1,913,760 I 09:59:26 Set L0 Data Zone Capacity Succeeded! I 09:59:26 Filling Buffer... (40 MB) I 09:59:27 Writing LeadIn... I 10:00:06 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 10:00:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 10:00:06 Writing Layer 0... (LBA: 0 - 1913759) I 10:19:44 Writing Layer 1... (LBA: 1913760 - 3827487) W 10:27:04 Failed to Write Sectors 2620736 - 2620767 - Reason: Tracking Servo Failure W 10:27:04 Retrying (1 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (2 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (3 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (4 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (5 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (6 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (7 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (8 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (9 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (10 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (11 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (12 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (13 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (14 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (15 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (16 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (17 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (18 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (19 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:04 Retrying (20 of 20)... W 10:27:04 Retry Failed - Reason: Invalid Address For Write W 10:27:31 Retrying (21)... W 10:27:31 Retry Failed - Reason: Invalid Address For Write W 10:27:32 Retrying (22)... W 10:27:32 Retry Failed - Reason: Invalid Address For Write W 10:27:32 Retrying (23)... W 10:27:32 Retry Failed - Reason: Invalid Address For Write W 10:27:33 Retrying (24)... W 10:27:33 Retry Failed - Reason: Invalid Address For Write W 10:27:33 Retrying (25)... W 10:27:33 Retry Failed - Reason: Invalid Address For Write E 10:27:34 Failed to Write Sectors 2620736 - 2620767 - Reason: Tracking Servo Failure E 10:27:34 Next Writable Address: 2620208 I 10:27:34 Synchronising Cache... W 10:27:57 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 10:27:57 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure W 10:27:57 Retrying (1 of 3)... W 10:28:09 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 10:28:09 Retry Failed - Reason: Program Memory Area Update Failure W 10:28:09 Retrying (2 of 3)... W 10:28:13 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Is Full W 10:28:13 Retry Failed - Reason: Program Memory Area Is Full W 10:28:13 Retrying (3 of 3)... W 10:28:14 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Is Full W 10:28:14 Retry Failed - Reason: Program Memory Area Is Full E 10:28:16 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure I 10:28:16 Synchronising Cache (Last Attempt!)... E 10:28:16 Synchronise Cache Failed! - Reason: Unknown (ASC: 0xA0, ASCQ: 0x80) W 10:28:21 User opted to skip the 'Close Track/Session/Disc' functions. E 10:28:21 Failed to Write Image! I 10:28:22 Exporting Graph Data... I 10:28:22 Graph Data File: C:\Users\user\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH10L_FC09_SUNDAY-NOVEMBER-07-2010_9-59_AM_MKM-001-00_2x.ibg I 10:28:22 Export Successfully Completed! E 10:28:22 Operation Failed! - Duration: 00:29:07 I 10:28:22 Average Write Rate: 3,180 KB/s (2.3x) - Maximum Write Rate: 3,362 KB/s (2.4x)
Cynthia Posted November 7, 2010 Posted November 7, 2010 If it can't burn Verbatims, I would go for a new burner. Reason: Tracking Servo Failure Indicates hardware related issue.
ianymaty Posted November 7, 2010 Posted November 7, 2010 You still have SP1 on Vista, update to SP2. Leave the I/O to Microsoft. Try burn the Verbatim at 4x. If that still not work, go out and buy yourself a new drive.
Recommended Posts