gazza667 Posted November 14, 2010 Posted November 14, 2010 Hi all. Im a noob to DL burning. Im not quite clear about your advice for updating firmware. I have a brand new Optiarc AD-7240S writer & have burned 3 or 4 'back up' Xbox 360 games successfully. But recently im getting a "Power Calibration Area Error". After searching this forum & seeing the advice on Firmware upgrades for dvd drives ive seen my one has Version 1.04 now listed. My drives firmware is 1.02. So im guessing i need to upgrade it. Can you confirm this is correct please ? Also will it effect the warranty on the drive once it's upgraded ? Im puzzled that it burned the first 3 or 4 disc no problem but now i keep getting the same error message. Many thanks for your time. Gazza Here's the log I 23:51:47 ImgBurn Version 2.5.2.0 started! I 23:51:47 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 23:51:47 Total Physical Memory: 2,095,532 KB - Available: 1,529,824 KB I 23:51:47 Initialising SPTI... I 23:51:47 Searching for SCSI / ATAPI devices... I 23:51:47 -> Drive 1 - Info: Optiarc DVD RW AD-7240S 1.02 (D:) (ATA) I 23:51:48 -> Drive 2 - Info: HL-DT-ST DVDRAM GSA-H10N JL12 (E:) (SCSI) I 23:51:48 Found 2 DVD±RW/RAMs! I 23:52:35 Operation Started! I 23:52:35 Source File: C:\Downloads\XBox 360 Games\Call Of Duty Modern Warfare 2\CODMW2.dvd I 23:52:35 Source File Sectors: 3,697,696 (MODE1/2048) I 23:52:35 Source File Size: 7,572,881,408 bytes I 23:52:35 Source File Volume Identifier: DVD_ROM I 23:52:35 Source File Volume Set Identifier: fd244000MS UDFBridge I 23:52:35 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 23:52:35 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 23:52:35 Source File File System(s): ISO9660, UDF (1.50) I 23:52:35 Destination Device: [3:0:0] Optiarc DVD RW AD-7240S 1.02 (D:) (ATA) I 23:52:35 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 23:52:35 Destination Media Sectors: 4,173,824 I 23:52:35 Write Mode: DVD I 23:52:35 Write Type: DAO I 23:52:35 Write Speed: MAX I 23:52:35 Link Size: Auto I 23:52:35 Lock Volume: Yes I 23:52:35 Test Mode: No I 23:52:35 OPC: No I 23:52:35 BURN-Proof: Enabled I 23:52:35 Write Speed Successfully Set! - Effective: 11,080 KB/s (8x) I 23:52:35 Book Type Setting: DVD-ROM I 23:52:35 Optimal L0 Data Zone Capacity: 1,913,760 I 23:52:35 Optimal L0 Data Zone Method: Copied From Original Disc I 23:52:41 Set L0 Data Zone Capacity Succeeded! I 23:52:41 Filling Buffer... (40 MB) I 23:52:43 Writing LeadIn... I 23:52:46 Writing Session 1 of 1... (1 Track, LBA: 0 - 3697695) I 23:52:46 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3697695) I 23:52:46 Writing Layer 0... (LBA: 0 - 1913759) I 00:01:05 Writing Layer 1... (LBA: 1913760 - 3697695) I 00:09:55 Synchronising Cache... I 00:09:56 Closing Track... I 00:10:14 Finalising Disc... W 00:10:44 Potential 'WaitImmediateIO' Deferred Error - (57%, 0/3) - Power Calibration Area Error W 00:10:44 Finalise Disc Failed! - Reason: Power Calibration Area Error W 00:10:44 Retrying (1 of 3)... W 00:11:13 Potential 'WaitImmediateIO' Deferred Error - (54%, 0/3) - Power Calibration Area Error W 00:11:13 Retry Failed - Reason: Power Calibration Area Error W 00:11:13 Retrying (2 of 3)... W 00:11:40 Potential 'WaitImmediateIO' Deferred Error - (49%, 0/3) - Power Calibration Area Error W 00:11:40 Retry Failed - Reason: Power Calibration Area Error W 00:11:40 Retrying (3 of 3)... W 00:12:17 Potential 'WaitImmediateIO' Deferred Error - (71%, 0/3) - Power Calibration Area Error W 00:12:17 Retry Failed - Reason: Power Calibration Area Error W 00:13:12 Retrying (4)... W 00:13:39 Potential 'WaitImmediateIO' Deferred Error - (50%, 0/3) - Power Calibration Area Error W 00:13:39 Retry Failed - Reason: Power Calibration Area Error W 00:14:09 Retrying (5)... W 00:14:39 Potential 'WaitImmediateIO' Deferred Error - (57%, 0/3) - Power Calibration Area Error W 00:14:39 Retry Failed - Reason: Power Calibration Area Error I 00:16:06 Exporting Graph Data... I 00:16:06 Graph Data File: C:\Documents and Settings\Gazza\Application Data\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7240S_1.02_13-NOVEMBER-2010_23-52_RICOHJPN-D01-67_MAX.ibg I 00:16:06 Export Successfully Completed! I 00:16:06 Operation Successfully Completed! - Duration: 00:23:31 I 00:16:06 Average Write Rate: 7,193 KB/s (5.2x) - Maximum Write Rate: 11,364 KB/s (8.2x) I 00:16:06 Cycling Tray before Verify... W 00:16:14 Waiting for device to become ready... I 00:16:36 Device Ready! I 00:16:37 Operation Started! I 00:16:37 Source Device: [3:0:0] Optiarc DVD RW AD-7240S 1.02 (D:) (ATA) I 00:16:37 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 00:16:37 Image File: C:\Downloads\XBox 360 Games\Call Of Duty Modern Warfare 2\CODMW2.dvd I 00:16:37 Image File Sectors: 3,697,696 (MODE1/2048) I 00:16:37 Image File Size: 7,572,881,408 bytes I 00:16:37 Image File Volume Identifier: DVD_ROM I 00:16:37 Image File Volume Set Identifier: fd244000MS UDFBridge I 00:16:37 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 00:16:37 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 00:16:37 Image File File System(s): ISO9660, UDF (1.50) I 00:16:37 Read Speed (Data/Audio): MAX / MAX I 00:16:37 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3697695) I 00:16:37 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3697695) I 00:16:37 Verifying Layer 0... (LBA: 0 - 1913759) I 00:22:21 Verifying Layer 1... (LBA: 1913760 - 3697695) W 00:22:34 Failed to Read Sector 1914304 - Reason: No Seek Complete W 00:24:13 Retrying (1)... W 00:24:19 Retry Failed - Reason: No Seek Complete W 00:24:22 Failed to Read Sector 1914304 - Reason: No Seek Complete W 00:24:28 Failed to Read Sector 1914305 - Reason: No Seek Complete ***** I Have Deleted all of the “Failed to Read Sector errors due to there being hundreds ***** I 00:55:52 Abort Request Acknowledged W 00:55:57 Failed to Read Sector 1914739 - Reason: No Seek Complete W 00:55:57 Failed to Read Sector 1914739 - Reason: No Seek Complete E 00:55:57 Failed to Verify Sectors! I 00:56:01 Exporting Graph Data... I 00:56:02 Graph Data File: C:\Documents and Settings\Gazza\Application Data\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7240S_1.02_13-NOVEMBER-2010_23-52_RICOHJPN-D01-67_MAX.ibg I 00:56:02 Export Successfully Completed! E 00:56:02 Operation Aborted! - Duration: 00:39:19 I 00:56:02 Average Verify Rate: 1,626 KB/s (1.2x) - Maximum Verify Rate: 16,079 KB/s (11.6x)
Rincewind Posted November 14, 2010 Posted November 14, 2010 You are correct, this is the latest version, taken from http://www.firmwarehq.com/Optiarc/AD-7240S/files.html Also: I 23:52:35 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) Unfortunately RICOH isn't deemed to be quality media even though it is from Japan; Verbatim with the ID MKM-xxx are, though ironically they are made in Singapore (quality ones are), and MKM = Mitsubishi Kagaku Media, go figure. Anyways, do update your firmware and try again, but next time also try using Verbatim DVD+R DL. Good luck.
gazza667 Posted November 14, 2010 Author Posted November 14, 2010 many thanks for a quick reply. Ive got some Verbatim on order so will let you know. Thank you Gazza
Recommended Posts