Set L0 Zone Data Capacity Failed!

[uhris]

hey i'm clueless what to do about this error and would love som help, here's my log;

 

I 15:55:28 ImgBurn Version 2.5.2.0 started!

I 15:55:28 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 15:55:28 Total Physical Memory: 3 140 476 KB - Available: 2 125 748 KB

W 15:55:28 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 15:55:28 Initialising SPTI...

I 15:55:28 Searching for SCSI / ATAPI devices...

I 15:55:28 -> Drive 1 - Info: Optiarc BD ROM BC-5500S 1.B2 (F:) (SATA)

I 15:55:28 Found 1 BD-ROM/DVD±RW!

I 16:01:21 Operation Started!

I 16:01:21 Source File: C:\Users\FelixÖ\Desktop\Dead.Rising.2.UNCUT.XBOX360-MARVEL\mvl-dr2d.mds

I 16:01:21 Source File Sectors: 3 340 320 (MODE1/2048)

I 16:01:21 Source File Size: 6 840 975 360 bytes

I 16:01:21 Source File Volume Identifier: Dead.Rising.2.UNCUT.XBOX360-MARVEL

I 16:01:21 Source File Volume Set Identifier: 3D7282250032F81F

I 16:01:21 Source File Application Identifier: IMGBURN V2.5.2.0 - THE ULTIMATE IMAGE BURNER!

I 16:01:21 Source File Implementation Identifier: ImgBurn

I 16:01:21 Source File File System(s): ISO9660; UDF (1.02)

I 16:01:21 Destination Device: [1:0:0] Optiarc BD ROM BC-5500S 1.B2 (F:) (SATA)

I 16:01:21 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x)

I 16:01:21 Destination Media Sectors: 3 827 520

I 16:01:21 Write Mode: DVD

I 16:01:21 Write Type: Incremental

I 16:01:21 Write Speed: 2x

I 16:01:21 Link Size: Auto

I 16:01:21 Lock Volume: Yes

I 16:01:21 Test Mode: No

I 16:01:21 OPC: No

I 16:01:21 BURN-Proof: Enabled

W 16:01:21 Write Speed Miscompare! - Wanted: 2 770 KB/s (2x), Got: 3 324 KB/s (2,4x)

I 16:01:21 Book Type Setting: DVD-ROM

I 16:01:36 Optimal L0 Data Zone Capacity: 1 670 160

I 16:01:36 Optimal L0 Data Zone Method: Copied From Original Disc

W 16:01:43 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List

W 16:01:43 Retrying (1)...

E 16:01:46 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List

E 16:01:46 Operation Failed! - Duration: 00:00:25

[ianymaty]

Why are you using Incremental? Switch back to DAO.

 

  Quote

I 16:01:21 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x)

 

2x is not an option for +R format, 2.4x being the lowest speed for it.

 

You are using 8x rated media but your drive show only 2.4x and 4x as supported speeds. Try them both.

[uhris]

  On 11/19/2010 at 3:35 PM, ianymaty said:

Why are you using Incremental? Switch back to DAO.

 

  Quote

I 16:01:21 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x)

 

2x is not an option for +R format, 2.4x being the lowest speed for it.

 

You are using 8x rated media but your drive show only 2.4x and 4x as supported speeds. Try them both.

 

I changed to DAO, have no idea why it was set on Incremental. Also tried both speeds but now it just retries to write and is stuck on 0%.

 

Thanks for the answer tho!

[uhris]

This is what I get now after it have tried to write on the disc for about 20 times.

 

 

"I/O Error!

 

Device: [1:0:0] Optiarc BD ROM BC-5500S 1.B2 (F:) (SATA)

 

ScsiStatus: 0x02

Interpretation: Check Condition

 

CDB: 2A 00 00 00 00 00 00 00 20 00

Interpretation: Write (10) - Sectors: 0 - 31

 

Sense Area: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 00 00

Interpretation: Power Calibration Area Error"

[ianymaty]

Clean the lens with a cleaning disc or manual with a soft cloth/cotton bud and alcohol