odawgg1 Posted November 22, 2010 Posted November 22, 2010 Hello, I've been having a recent problem with my USB external DVD burner and IMGBURN. I've recently upgraded to Windows 7 Ultimate and had no problem for a few months when all of a sudden my dvd burner starts to fail midway through each burn attempt with different disc images. I thought it may have been the burner going bad, but I plugged it into my Mac and was able to burn 20 or images without any problems. There aren't any error messages in the log to post because the burner's light stops blinking midway through and it just sits there spinning for eternity until I turn it off (the log only says something is wrong when I turn the power off). Sometimes, the burning gets halfway through, sometimes only 2%, and once in awhile it even finishes. Here are the specs on the Burner: SONY DVD RW DRU-840A (external USB) and it has been flashed with region free firmware (it was a used model and wouldn't allow region changing with the current firmware). Again, it has shown absolutely no problems until the past month or so. I've been using Verbatim discs (both dvd-r and dvd+r dl) Computer: Emachines T6520, Athlon 3400+, 2 gigs of RAM I've tried reinstalling Windows 7 with a repair install, deleting the USB drivers and having Windows download them again, and even tried using different USB jacks on the desktop. Nothing seems to work. Any idea what can cause this? I seem to be much more succesful using Windows' own disc image burner as that has failed only once so far (out of about 6 times).
odawgg1 Posted November 22, 2010 Author Posted November 22, 2010 sure thing... again, I didn't receive any error messages until I turned the DVD Burner off manually. It was just sitting there spinning doing nothing and the write speed went down to 0. I think this is the section of the log file that had the error. I 16:34:19 Source File File System(s): ISO9660, UDF (1.02) I 16:34:19 Destination Device: [0:0:0] SONY DVD RW DRU-840A SS01 (J:) (USB) I 16:34:19 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x, 10x) I 16:34:19 Destination Media Sectors: 4,173,824 I 16:34:19 Write Mode: DVD I 16:34:19 Write Type: DAO I 16:34:19 Write Speed: 4x I 16:34:19 Link Size: Auto I 16:34:19 Lock Volume: Yes I 16:34:19 Test Mode: No I 16:34:19 OPC: No I 16:34:19 BURN-Proof: Enabled I 16:34:19 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 16:34:19 Optimal L0 Data Zone Capacity: 1,880,464 I 16:34:19 Optimal L0 Data Zone Method: ECC Block Boundary I 16:35:05 Set L0 Data Zone Capacity Succeeded! I 16:35:06 Filling Buffer... (40 MB) I 16:35:07 Writing LeadIn... I 16:35:09 Writing Session 1 of 1... (1 Track, LBA: 0 - 3760927) I 16:35:09 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3760927) I 16:35:09 Writing Layer 0... (LBA: 0 - 1880463) I 16:56:54 Abort Request Acknowledged E 16:56:59 Failed to Write Sectors 134048 - 134079 - Reason: The semaphore timeout period has expired. I 16:56:59 Synchronising Cache... W 16:56:59 Synchronise Cache Failed! - Reason: The requested resource is in use. W 16:56:59 Retrying (1 of 3)... W 16:56:59 Retry Failed - Reason: The requested resource is in use. W 16:56:59 Retrying (2 of 3)... W 16:56:59 Retry Failed - Reason: The requested resource is in use. W 16:56:59 Retrying (3 of 3)... W 16:56:59 Retry Failed - Reason: The requested resource is in use. W 16:56:59 Device Removal Detected! W 16:56:59 The device list will be refreshed at the next available opportunity. E 16:57:03 Synchronise Cache Failed! - Reason: The requested resource is in use. W 16:57:05 User opted to skip the 'Close Track/Session/Disc' functions. E 16:57:05 Failed to Write Image! E 16:57:07 Failed to unlock drive from exclusive access. E 16:57:07 Reason: The requested resource is in use. I 16:57:07 Exporting Graph Data... I 16:57:07 Graph Data File: C:\Users\Owen\AppData\Roaming\ImgBurn\Graph Data Files\SONY_DVD_RW_DRU-840A_SS01_SUNDAY-NOVEMBER-21-2010_4-34_PM_MKM-003-00_4x.ibg I 16:57:07 Export Successfully Completed! E 16:57:07 Operation Aborted! - Duration: 00:22:46 I 16:57:07 Average Write Rate: 204 KB/s (0.1x) - Maximum Write Rate: 5,575 KB/s (4.0x) I 16:57:08 Searching for SCSI / ATAPI devices... I 16:57:08 -> Drive 1 - Info: HL-DT-ST CD-ROM GCR-8483B 1.00 (E:) (ATA) I 16:57:08 -> Drive 2 - Info: HL-DT-ST DVDRAM GSA-4163B A106 (D:) (ATA) I 16:57:08 Found 1 CD-ROM and 1 DVD±RW/RAM! I 16:57:12 Close Request Acknowledged I 16:57:12 Closing Down... I 16:57:12 Shutting down SPTI... I 16:57:12 ImgBurn closed!
LIGHTNING UK! Posted November 22, 2010 Posted November 22, 2010 So it looks like the comms between your drive and the software are getting messed up. The program has submitted a command to be processed by the drive but it's just not getting a response. Do you have anything in your filter drivers list? (Copy + paste from the 'Filter Driver Load Order' feature on the 'Tools' menu) Do your other drives in that machine still work ok? If you have the option, never a drive externally when it could be used internally. Internal drives typically suffer from less problems than external ones.
odawgg1 Posted November 22, 2010 Author Posted November 22, 2010 =============================================== Filter Driver Load Order - ImgBurn v2.5.2.0 =============================================== Upper Device Filter: [None Found] Upper Class Filter: [None Found] Device: CD/DVD-ROM Device Lower Class Filter: [None Found] Lower Device Filter: [None Found] I do have an internal, but it is dying slowly and can barely read a dvd-r at this point. Might have to get that replaced now that the USB DVD drive doesn't seem to be working with the PC as it used to. It's just strange that it was working fine for months and now it continuously hangs, yet on the Mac it hasn't failed me once (and still doesn't). Windows 7 issue perhaps? or maybe a power supply issue? I have noticed the keyboard and mouse dropping out occasionally, but it hasn't happened in a few weeks.
Recommended Posts