imgburn problem

[hyphy]

hi ijust downloade Imgburn to burn my dvd copy from dvd shrink

it burns great but the problem is my dvd players is reading the dvd

it say no audio data , but when i played it on my pc it works fine

 

I used ripit4me to rip the dvd then dvdshrink!

[LIGHTNING UK!]

'no audio data' is a bit of a weird message.

 

I've seen them say 'no disc' etc but not 'no audio'. Does your player support the discs you're using?

 

Have you just tried 1 disc? Did you only save the DTS track or something and your player doesn't support DTS?

 

If you're using DVD+R media, see if your drive supports / is configured for bitsetting to DVDROM.

 

Also check you're using decent media in the first place. Maybe your player just can't read them full stop.

 

If it burns and verifies ok, there is nothing wrong with the actual burn itself, the problem lies elsewhere I'm afraid.

[hyphy]

how do u check for bitsetting ?

[polopony]

in the lower right hand corner of IMGburn's main window you'll see a little icon that looks like a book click on it and a window will open showing different drives if your drive is listed click on that and where it says "change for" click on the drop down menu arrow for your options, choose one and below that you'll see "new setting " you select from the drop down DVD-ROM, this makes your player think the disc is a factory pressed dvd .You leave out a lot of info in your post the best thing when coming here with a problem is to post a log of the burn which has all sorts of info we can use . In shrink you want to leave the AC3 audio unless you have hardware that can play the DTS like Lightning says .The error you posted I've never seen either .It does sound like you re authored the disc incorrectly.get back with some info and we'll clear up the problem

[lfcrule1972]

I am assuming there are no audio options accessible via your DVD remote control ? I had a dvd once that needed me to select a different audio option for the sound to play. On the PC it did it automatically......