GaborDenes Posted December 8, 2010 Posted December 8, 2010 (edited) Hey guys, after my problems with 2.5.2.0 which fails to eject the disc before verification, I upgraded to 2.5.3.0 The first try was a full success, disc ejected and verified -> no problem at all BUT both next tries gave me results like this: ----------------------------------------------------------------------------------------------- I 11:29:48 ImgBurn Version 2.5.3.0 started! I 11:29:48 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6002 : Service Pack 2) I 11:29:48 Total Physical Memory: 8.255.724 KB - Available: 5.391.048 KB W 11:29:48 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 11:29:48 Initialising SPTI... I 11:29:48 Searching for SCSI / ATAPI devices... I 11:29:48 -> Drive 1 - Info: ELBY CLONEDRIVE 1.4 (W:) (SCSI) I 11:29:49 -> Drive 2 - Info: HL-DT-ST BD-RE BH08LS20 2.00 (Y:) (ATA) I 11:29:49 Found 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 11:29:56 Operation Started! I 11:29:56 Building Image Tree... I 11:29:56 Calculating Totals... I 11:29:56 Preparing Image... I 11:29:56 Contents: 126 Files, 15 Folders I 11:29:56 Content Type: BD Video I 11:29:56 Data Type: MODE1/2048 I 11:29:56 File System(s): UDF (2.50) I 11:29:56 Volume Label: [Not Configured] I 11:29:57 Size: 23.939.975.658 bytes I 11:29:57 Sectors: 11.689.515 I 11:29:57 Image Size: 23.941.545.984 bytes I 11:29:57 Image Sectors: 11.690.208 I 11:29:57 Operation Successfully Completed! - Duration: 00:00:00 I 11:32:47 Operation Started! I 11:32:47 Building Image Tree... I 11:32:49 Calculating Totals... I 11:32:49 Preparing Image... I 11:32:49 Contents: 126 Files, 15 Folders I 11:32:49 Content Type: BD Video I 11:32:49 Data Type: MODE1/2048 I 11:32:49 File System(s): UDF (2.50) I 11:32:49 Volume Label: Holiday 2010 I 11:32:49 Size: 23.939.975.658 bytes I 11:32:49 Sectors: 11.689.515 I 11:32:49 Image Size: 23.941.545.984 bytes I 11:32:49 Image Sectors: 11.690.208 I 11:32:51 Operation Successfully Completed! - Duration: 00:00:03 I 11:32:51 Operation Started! I 11:32:51 Source File: -==/\/[bUILD IMAGE]\/\==- I 11:32:51 Source File Sectors: 11.690.208 (MODE1/2048) I 11:32:51 Source File Size: 23.941.545.984 bytes I 11:32:51 Source File Volume Identifier: Holiday 2010 I 11:32:51 Source File Volume Set Identifier: 3D885C1700B2600B I 11:32:51 Source File Application Identifier: ImgBurn v2.5.3.0 I 11:32:51 Source File Implementation Identifier: ImgBurn I 11:32:51 Source File File System(s): UDF (2.50) I 11:32:51 Destination Device: [3:4:0] HL-DT-ST BD-RE BH08LS20 2.00 (Y:) (ATA) I 11:32:51 Destination Media Type: BD-R (Disc ID: LGEBRA-S04-000) (Speeds: 2x; 4x; 6x; 8x) I 11:32:51 Destination Media Sectors: 12.219.392 I 11:32:51 Write Mode: BD I 11:32:51 Write Type: DAO I 11:32:51 Write Speed: 4x I 11:32:51 BD-R Verify Not Required: Yes I 11:32:51 Link Size: Auto I 11:32:51 Lock Volume: Yes I 11:32:51 Test Mode: No I 11:32:51 OPC: No I 11:32:51 BURN-Proof: Enabled I 11:32:51 Write Speed Successfully Set! - Effective: 17.982 KB/s (4x) I 11:33:10 Filling Buffer... (40 MB) I 11:33:11 Writing LeadIn... I 11:33:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 11690207) I 11:33:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11690207) I 11:55:33 Synchronising Cache... I 11:55:37 Closing Track... I 11:55:38 Finalising Disc... W 11:55:48 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Power On, Reset, or Bus Device Reset Occurred W 11:55:48 Finalise Disc Failed! - Reason: Power On, Reset, or Bus Device Reset Occurred W 11:55:48 Retrying (1 of 3)... W 11:55:48 Retry Failed - Reason: Medium Not Present - Tray Open W 11:55:48 Retrying (2 of 3)... W 11:55:48 Retry Failed - Reason: Medium Not Present - Tray Open W 11:55:48 Retrying (3 of 3)... W 11:55:48 Retry Failed - Reason: Medium Not Present - Tray Open I 12:19:44 Exporting Graph Data... I 12:19:44 Graph Data File: C:\Users\admin\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH08LS20_2.00_MITTWOCH-8-DEZEMBER-2010_11-32_LGEBRA-S04-000_4x.ibg I 12:19:44 Export Successfully Completed! I 12:19:44 Operation Successfully Completed! - Duration: 00:46:53 I 12:19:44 Average Write Rate: 17.435 KB/s (3.9x) - Maximum Write Rate: 18.073 KB/s (4.0x) I 12:19:44 Cycling Tray before Verify... W 12:19:50 Waiting for device to become ready... I 12:20:06 Device Ready! I 12:20:07 Operation Started! I 12:20:07 Source Device: [3:4:0] HL-DT-ST BD-RE BH08LS20 2.00 (Y:) (ATA) I 12:20:07 Source Media Type: BD-R (Disc ID: LGEBRA-S04-000) (Speeds: 2x; 4x; 6x; 8x) I 12:20:07 Image File: -==/\/[bUILD IMAGE]\/\==- I 12:20:07 Image File Sectors: 11.690.208 (MODE1/2048) I 12:20:07 Image File Size: 23.941.545.984 bytes I 12:20:07 Image File Volume Identifier: Holiday 2010 I 12:20:07 Image File Volume Set Identifier: 3D885C1700B2600B I 12:20:07 Image File Application Identifier: ImgBurn v2.5.3.0 I 12:20:07 Image File Implementation Identifier: ImgBurn I 12:20:07 Image File File System(s): UDF (2.50) I 12:20:07 Read Speed (Data/Audio): MAX / MAX I 12:20:08 Verifying Session 1 of 1... (1 Track, LBA: 0 - 11690207) I 12:20:08 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 11690207) Thew error message about open tray is wrong, tray is closed an after clicking on continue, the verification process starts (I used the same media for burning now and before, so it shouldnt be a problem of the BD-R media) Edited December 8, 2010 by GaborDenes
LIGHTNING UK! Posted December 8, 2010 Posted December 8, 2010 This is a system issue. Something on your machine (drivers I guess) is making the command time out after 10 seconds rather than the period I tell it.
Recommended Posts