johnyb Posted December 16, 2010 Posted December 16, 2010 Just bought and installed LG BH10LS30 however get error messages when writing to DVD-R. Originaly it was attached to to a VIA VT6421 RAID controller card since no onboard SATA ports available, so moved it to internal controller and still same issue. I can use the free software that came with the drive (Power2go)which works fine and tried updating the firmware (but is up to date). So sent for replacement, now replacement drive has same problem. I also tried removing the VIA controller card, no change. Tried connecting externally via a SATA to USB still same prob... Help would be appreciated since dont want to use anything except Imgburn.. Media used was Verbatim, other pioneer drive attached is via IDA Logs attached... ; //****************************************\\ ; ImgBurn Version 2.5.4.0 - Log ; Wednesday, 15 December 2010, 18:37:56 ; \\****************************************// ; ; I 18:35:31 ImgBurn Version 2.5.4.0 started! I 18:35:31 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 18:35:31 Total Physical Memory: 3,529,976 KB - Available: 2,593,288 KB I 18:35:31 Initialising SPTI... I 18:35:31 Searching for SCSI / ATAPI devices... I 18:35:32 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.00 (F:) (ATA) I 18:35:32 -> Drive 2 - Info: PIONEER DVD-RW DVR-111D 1.29 (R:) (ATA) I 18:35:32 Found 1 DVD±RW and 1 BD-RE! I 18:36:23 Operation Started! I 18:36:23 Source File: Z:\xxxxx.iso I 18:36:23 Source File Sectors: 1,688,544 (MODE1/2048) I 18:36:23 Source File Size: 3,458,138,112 bytes I 18:36:23 Source File Volume Identifier: xxxxx I 18:36:23 Source File File System(s): ISO9660 (Bootable), Joliet I 18:36:23 Destination Device: [2:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (F:) (ATA) I 18:36:23 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 8x, 12x, 16x) I 18:36:23 Destination Media Sectors: 2,297,888 I 18:36:23 Write Mode: DVD I 18:36:23 Write Type: DAO I 18:36:23 Write Speed: 2x I 18:36:23 Link Size: Auto I 18:36:23 Lock Volume: Yes I 18:36:23 Test Mode: No I 18:36:23 OPC: No I 18:36:23 BURN-Proof: Enabled I 18:36:23 Write Speed Successfully Set! - Effective: 2,770 KB/s (2x) I 18:36:25 Filling Buffer... (40 MB) I 18:36:30 Writing LeadIn... W 18:36:35 Failed to Write Sectors 0 - 31 - Reason: Write Error W 18:36:35 Retrying (1 of 20)... W 18:36:35 Retry Failed - Reason: Write Error W 18:36:35 Retrying (2 of 20)... W 18:36:35 Retry Failed - Reason: Write Error W 18:36:35 Retrying (3 of 20)... W 18:36:35 Retry Failed - Reason: Write Error W 18:36:35 Retrying (4 of 20)... W 18:36:35 Retry Failed - Reason: Write Error W 18:36:35 Retrying (5 of 20)... W 18:36:35 Retry Failed - Reason: Write Error W 18:36:35 Retrying (6 of 20)... W 18:36:35 Retry Failed - Reason: Write Error W 18:36:35 Retrying (7 of 20)... W 18:36:35 Retry Failed - Reason: Write Error W 18:36:35 Retrying (8 of 20)... W 18:36:36 Retry Failed - Reason: Write Error W 18:36:36 Retrying (9 of 20)... W 18:36:36 Retry Failed - Reason: Write Error W 18:36:36 Retrying (10 of 20)... W 18:36:36 Retry Failed - Reason: Write Error W 18:36:36 Retrying (11 of 20)... W 18:36:36 Retry Failed - Reason: Write Error W 18:36:36 Retrying (12 of 20)... W 18:36:36 Retry Failed - Reason: Write Error W 18:36:36 Retrying (13 of 20)... W 18:36:36 Retry Failed - Reason: Write Error W 18:36:36 Retrying (14 of 20)... W 18:36:36 Retry Failed - Reason: Write Error W 18:36:36 Retrying (15 of 20)... W 18:36:36 Retry Failed - Reason: Write Error W 18:36:36 Retrying (16 of 20)... W 18:36:36 Retry Failed - Reason: Write Error W 18:36:36 Retrying (17 of 20)... W 18:36:36 Retry Failed - Reason: Write Error W 18:36:36 Retrying (18 of 20)... W 18:36:36 Retry Failed - Reason: Write Error W 18:36:36 Retrying (19 of 20)... W 18:36:36 Retry Failed - Reason: Write Error W 18:36:36 Retrying (20 of 20)... W 18:36:36 Retry Failed - Reason: Write Error E 18:37:47 Failed to Write Sectors 0 - 31 - Reason: Write Error I 18:37:47 Synchronising Cache... W 18:37:48 User opted to skip the 'Close Track/Session/Disc' functions. E 18:37:48 Failed to Write Image! E 18:37:48 Operation Failed! - Duration: 00:01:25 I 18:37:48 Average Write Rate: N/A - Maximum Write Rate: N/A I 18:37:56 Close Request Acknowledged I 18:37:56 Closing Down... I 18:37:56 Shutting down SPTI... I 18:37:56 ImgBurn closed!
ianymaty Posted December 16, 2010 Posted December 16, 2010 I 18:36:23 Destination Device: [2:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (F:) (ATA)I 18:36:23 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 8x, 12x, 16x) I 18:36:23 Write Speed: 2x 2x is not an option in your drive/firmware/media combination. Try with all the available speeds. In the log your drive is shown as (F:) (ATA) but your screen shows (G:) (RAID) Is your drive connected to a RAID controller port? Move it to a regular port.
LIGHTNING UK! Posted December 16, 2010 Posted December 16, 2010 Install the latest firmware if you haven't already (it's impossible to tell from here!) http://www.firmwarehq.com/LG/BH10LS30/files.html
johnyb Posted December 16, 2010 Author Posted December 16, 2010 I 18:36:23 Destination Device: [2:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (F:) (ATA)I 18:36:23 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 8x, 12x, 16x) I 18:36:23 Write Speed: 2x 2x is not an option in your drive/firmware/media combination. Try with all the available speeds. In the log your drive is shown as (F:) (ATA) but your screen shows (G:) (RAID) Is your drive connected to a RAID controller port? Move it to a regular port. The writing speed was the problem ! I was under the impression the application would only allow you to select those available from the drive.. my mistake Thanks.
Recommended Posts