DVD+R DL error!

[jfmms]

Hi! I have burn a lot of DVD+R DL's verbatim and never have a problem!

Today give me this error!

 

I 16:42:12 ImgBurn Version 2.5.1.0 started!

I 16:42:12 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 16:42:12 Total Physical Memory: 2.095.692 KB - Available: 1.220.556 KB

W 16:42:12 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 16:42:12 Initialising SPTI...

I 16:42:12 Searching for SCSI / ATAPI devices...

I 16:42:13 -> Drive 1 - Info: ATAPI DVD A DH16A3L 8H1B (E:) (ATA)

I 16:42:13 Found 1 DVD±RW/RAM!

I 16:44:00 Operation Started!

I 16:44:00 Source File: C:\Users\hp\Desktop\test\test\test.dvd

I 16:44:00 Source File Sectors: 3.827.488 (MODE1/2048)

I 16:44:00 Source File Size: 7.838.695.424 bytes

I 16:44:00 Source File Volume Identifier: DVD_ROM

I 16:44:00 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 16:44:00 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 16:44:00 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 16:44:00 Source File File System(s): ISO9660; UDF (1.50)

I 16:44:00 Destination Device: [1:0:0] ATAPI DVD A DH16A3L 8H1B (E:) (ATA)

I 16:44:00 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x)

I 16:44:00 Destination Media Sectors: 4.173.824

I 16:44:00 Write Mode: DVD

I 16:44:00 Write Type: DAO

I 16:44:00 Write Speed: 2,4x

I 16:44:00 Link Size: Auto

I 16:44:00 Lock Volume: Yes

I 16:44:00 Test Mode: No

I 16:44:00 OPC: No

I 16:44:00 BURN-Proof: Enabled

W 16:44:00 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x)

I 16:44:00 Book Type Setting: N/A

I 16:44:00 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 16:44:00 User Specified L0 Data Zone Capacity: 1.913.760

E 17:03:02 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

E 17:03:03 Operation Failed! - Duration: 00:19:02

I 17:03:03 Average Write Rate: N/A - Maximum Write Rate: N/A

 

Is it possible that my drive has a problem?

 

Thank you

Edited December 18, 2010 by jfmms

[Rincewind]

I don't know, however:

 

I 16:44:00 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x)
W 16:44:00 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x)

 

Try setting your speed to either 6x or 8x, 2.4x is not supported by your media and is automatically sped up to 4x. If you are still getting errors, make sure that your drive is clean (use a lens cleaner) and more importantly make sure your firmware for your drive is up to date, then if you are still getting problems we'll try to go from there. Good luck.

 

--edit

 

I also forgot to mention, you are running 2.5.1, consider updating to the latest version of imgburn, 2.5.4.

Edited December 18, 2010 by Rincewind

[ianymaty]

Try again after installing the latest firmware 8H1F http://www.firmwarehq.com/Lite-On/DH-16A3L/files.html

 

Use all speeds available, better try the highest than the lowest since you are using 8x rated media.

[jfmms]

Thanks for your answers!

 

I try it to new drive and here is the log!

 

I 20:58:26 ImgBurn Version 2.5.4.0 started!

I 20:58:26 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 20:58:26 Total Physical Memory: 1.037.552 KB - Available: 687.768 KB

W 20:58:26 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 20:58:26 Initialising SPTI...

I 20:58:26 Searching for SCSI / ATAPI devices...

I 20:58:26 -> Drive 1 - Info: MVO UZKD2ROT 1.03 (E:) (SCSI)

I 20:58:26 -> Drive 2 - Info: MVO UZKD2ROT 1.03 (F:) (SCSI)

I 20:58:26 -> Drive 3 - Info: TSSTcorp CDDVDW SE-S084F TS00 (G:) (USB)

I 20:58:26 Found 1 DVD±RW/RAM and 2 BD-ROM/HD DVD-ROMs!

I 21:04:22 Operation Started!

I 21:04:22 Source File: D:\test\test\test.dvd

I 21:04:22 Source File Sectors: 3.827.488 (MODE1/2048)

I 21:04:22 Source File Size: 7.838.695.424 bytes

I 21:04:22 Source File Volume Identifier: DVD_ROM

I 21:04:22 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 21:04:22 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 21:04:22 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 21:04:22 Source File File System(s): ISO9660; UDF (1.50)

I 21:04:22 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S084F TS00 (G:) (USB)

I 21:04:22 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 3x; 4x; 6x)

I 21:04:22 Destination Media Sectors: 4.173.824

I 21:04:22 Write Mode: DVD

I 21:04:22 Write Type: DAO

I 21:04:22 Write Speed: 4x

I 21:04:22 Link Size: Auto

I 21:04:22 Lock Volume: Yes

I 21:04:22 Test Mode: No

I 21:04:22 OPC: No

I 21:04:22 BURN-Proof: Enabled

I 21:04:22 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x)

I 21:04:23 Book Type Setting: DVD-ROM

I 21:04:23 User Specified L0 Data Zone Capacity: 1.913.760

I 21:09:00 Set L0 Data Zone Capacity Succeeded!

I 21:09:13 Filling Buffer... (40 MB)

I 21:09:14 Writing LeadIn...

I 21:09:17 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 21:09:17 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 21:09:17 Writing Layer 0... (LBA: 0 - 1913759)

I 21:24:58 Writing Layer 1... (LBA: 1913760 - 3827487)

I 21:40:50 Synchronising Cache...

I 21:40:56 Closing Track...

I 21:41:01 Finalising Disc...

W 21:41:49 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out

W 21:41:49 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out

W 21:41:49 Retrying (1 of 3)...

W 21:44:00 Potential 'WaitImmediateIO' Deferred Error - (77%, 0/3) - Session Fixation Error Writing Lead In

W 21:44:00 Retry Failed - Reason: Session Fixation Error Writing Lead In

W 21:44:00 Retrying (2 of 3)...

W 21:45:00 Potential 'WaitImmediateIO' Deferred Error - (94%, 0/3) - Session Fixation Error Writing Lead Out

W 21:45:00 Retry Failed - Reason: Session Fixation Error Writing Lead Out

W 21:45:00 Retrying (3 of 3)...

 

Maybe discs are fake?

[Rincewind]

I don't think the discs are fake, MKM-003-00 are fine. Try at 6x. I am assuming the firmware to your drive is up to date. If it still fails after trying at 6x.... Maybe someone more knowledgeable can help.

[ianymaty]

Now you are using an external drive so it could be related to system drivers.

 

Update your motherboard chipset driver. This site might help you to identify what you need to update http://www.ma-config.com/

[LIGHTNING UK!]

external AND slimline

[jfmms]

Hi again guys!

I update my firmware from ATAPI DVD A DH16A3L 8H1B to ATAPI DVD A DH16A3L 8H1F like he said ISF Guru!

Always burn with option 2,4x but automatically goes to 4x! I have more than 20 succesfully burns,I don't know what is going now!

 

I burn a single layer disc philips with nero and the burn is succesful!

Maybe dl discs are not supported from my drive anymore?

 

Here is the new log!

 

I 18:31:49 ImgBurn Version 2.5.4.0 started!

I 18:31:49 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 18:31:49 Total Physical Memory: 2.095.692 KB - Available: 1.211.572 KB

W 18:31:49 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 18:31:49 Initialising SPTI...

I 18:31:49 Searching for SCSI / ATAPI devices...

I 18:31:49 -> Drive 1 - Info: ATAPI DVD A DH16A3L 8H1F (E:) (ATA)

I 18:31:49 Found 1 DVD±RW/RAM!

I 18:32:18 Operation Started!

I 18:32:18 Source File: J:\dvd\dvd\dvd.dvd

I 18:32:18 Source File Sectors: 3.827.488 (MODE1/2048)

I 18:32:18 Source File Size: 7.838.695.424 bytes

I 18:32:18 Source File Volume Identifier: DVD_ROM

I 18:32:18 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 18:32:18 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 18:32:18 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 18:32:18 Source File File System(s): ISO9660; UDF (1.50)

I 18:32:18 Destination Device: [1:0:0] ATAPI DVD A DH16A3L 8H1F (E:) (ATA)

I 18:32:18 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x)

I 18:32:18 Destination Media Sectors: 4.173.824

I 18:32:18 Write Mode: DVD

I 18:32:18 Write Type: DAO

I 18:32:18 Write Speed: 2,4x

I 18:32:18 Link Size: Auto

I 18:32:18 Lock Volume: Yes

I 18:32:18 Test Mode: No

I 18:32:18 OPC: No

I 18:32:18 BURN-Proof: Enabled

W 18:32:18 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x)

I 18:32:18 Book Type Setting: DVD-ROM

I 18:32:18 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 18:32:18 User Specified L0 Data Zone Capacity: 1.913.760

W 18:41:32 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

Edited December 19, 2010 by jfmms

[ianymaty]

I 18:32:18 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x)

I 18:32:18 Write Speed: 2,4x

W 18:32:18 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x)

 

2,4x is not available in your drive/firmware/media combination you have.

 

You have to try all the speeds available to see if your drive can produce a working disc. You're left with 6x and 8x since 4x was used already.

[jfmms]

6x

 

I 22:17:28 ImgBurn Version 2.5.4.0 started!

I 22:17:28 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 22:17:28 Total Physical Memory: 2.095.692 KB - Available: 1.119.760 KB

W 22:17:28 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 22:17:28 Initialising SPTI...

I 22:17:28 Searching for SCSI / ATAPI devices...

I 22:17:28 -> Drive 1 - Info: ATAPI DVD A DH16A3L 8H1F (E:) (ATA)

I 22:17:28 Found 1 DVD±RW/RAM!

I 22:18:41 Operation Started!

I 22:18:41 Source File: J:\dvd\dvd\dvd.dvd

I 22:18:41 Source File Sectors: 3.827.488 (MODE1/2048)

I 22:18:41 Source File Size: 7.838.695.424 bytes

I 22:18:41 Source File Volume Identifier: DVD_ROM

I 22:18:41 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 22:18:41 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 22:18:41 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 22:18:41 Source File File System(s): ISO9660; UDF (1.50)

I 22:18:41 Destination Device: [1:0:0] ATAPI DVD A DH16A3L 8H1F (E:) (ATA)

I 22:18:41 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x)

I 22:18:41 Destination Media Sectors: 4.173.824

I 22:18:41 Write Mode: DVD

I 22:18:41 Write Type: DAO

I 22:18:41 Write Speed: 6x

I 22:18:41 Link Size: Auto

I 22:18:41 Lock Volume: Yes

I 22:18:41 Test Mode: No

I 22:18:41 OPC: No

I 22:18:41 BURN-Proof: Enabled

I 22:18:41 Write Speed Successfully Set! - Effective: 8.310 KB/s (6x)

I 22:18:41 Book Type Setting: DVD-ROM

I 22:18:41 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 22:18:41 User Specified L0 Data Zone Capacity: 1.913.760

W 22:27:05 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

 

8x

 

I 22:40:40 ImgBurn Version 2.5.4.0 started!

I 22:40:40 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 22:40:40 Total Physical Memory: 2.095.692 KB - Available: 1.312.832 KB

W 22:40:40 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 22:40:40 Initialising SPTI...

I 22:40:40 Searching for SCSI / ATAPI devices...

I 22:40:40 -> Drive 1 - Info: ATAPI DVD A DH16A3L 8H1F (E:) (ATA)

I 22:40:40 Found 1 DVD±RW/RAM!

I 22:41:18 Operation Started!

I 22:41:18 Source File: J:\dvd\dvd\dvd.dvd

I 22:41:18 Source File Sectors: 3.827.488 (MODE1/2048)

I 22:41:18 Source File Size: 7.838.695.424 bytes

I 22:41:18 Source File Volume Identifier: DVD_ROM

I 22:41:18 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 22:41:18 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 22:41:18 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 22:41:18 Source File File System(s): ISO9660; UDF (1.50)

I 22:41:18 Destination Device: [1:0:0] ATAPI DVD A DH16A3L 8H1F (E:) (ATA)

I 22:41:18 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x)

I 22:41:18 Destination Media Sectors: 4.173.824

I 22:41:18 Write Mode: DVD

I 22:41:18 Write Type: DAO

I 22:41:18 Write Speed: 8x

I 22:41:18 Link Size: Auto

I 22:41:18 Lock Volume: Yes

I 22:41:18 Test Mode: No

I 22:41:18 OPC: No

I 22:41:18 BURN-Proof: Enabled

I 22:41:18 Write Speed Successfully Set! - Effective: 11.080 KB/s (8x)

I 22:41:18 Book Type Setting: DVD-ROM

I 22:41:18 Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

I 22:41:18 User Specified L0 Data Zone Capacity: 1.913.760

E 22:49:50 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error

Edited December 19, 2010 by jfmms

[ianymaty]

Can you try that drive in another computer for last resort?

 

Seems you need to replace it with a new one.