Koekwous Posted January 8, 2011 Posted January 8, 2011 (edited) Hello, after reading many posts and forums I still have no answer for my problem. I've waisted many DL disc already and can't seem to find out what exactly the problem is. Here it goes: I already bought a new burner: Sony Optiarc AD7263S 24xDVDRW, I'm using Verbatin 8x DVD+R DL. Burnspeed max 2.4. I'm using Windows7. The subject that I'm burning are Xbox360 games which are patched with ABGX360. The menu in IMGBURN has been set to layer break setting L0 = 1913760. The burnproces is without any problem but IMGBURN does perform closing track and completly fails even after the command to abort burningproces (eventhough the log indicates that it received the order to abort). I need to close IMGBURN by using Taskmanager. I've also tried using Nero 9.0 but also get the command: Could not perform closing disc. I'm completly lost and need help. I 23:15:08 ImgBurn Version 2.5.4.0 started! I 23:15:08 Microsoft Windows 7 Home Premium Edition (6.1, Build 7600) I 23:15:08 Total Physical Memory: 2.882.100 KB - Available: 1.994.016 KB W 23:15:08 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 23:15:08 Initialising SPTI... I 23:15:08 Searching for SCSI / ATAPI devices... I 23:15:08 -> Drive 1 - Info: Optiarc DVD RW AD-7263S 1.03 (E:) (SATA) I 23:15:08 Found 1 DVD±RW/RAM! I 23:15:24 Operation Started! I 23:15:24 Source File: D:\XBox 360\Kinect Sports\mvl-ksks.dvd I 23:15:24 Source File Sectors: 3.827.488 (MODE1/2048) I 23:15:24 Source File Size: 7.838.695.424 bytes I 23:15:24 Source File Volume Identifier: DVD_ROM I 23:15:24 Source File Volume Set Identifier: 1b018000MS UDFBridge I 23:15:24 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 23:15:24 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 23:15:24 Source File File System(s): ISO9660; UDF (1.50) I 23:15:24 Destination Device: [4:0:0] Optiarc DVD RW AD-7263S 1.03 (E:) (SATA) I 23:15:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x)(other brand but same problem with Verbatin) I 23:15:24 Destination Media Sectors: 4.173.824 I 23:15:24 Write Mode: DVD I 23:15:24 Write Type: DAO I 23:15:24 Write Speed: 2,4x I 23:15:24 Link Size: Auto I 23:15:24 Lock Volume: Yes I 23:15:24 Test Mode: No I 23:15:24 OPC: No I 23:15:24 BURN-Proof: Enabled W 23:15:24 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x) I 23:15:24 Book Type Setting: DVD-ROM I 23:15:24 Optimal L0 Data Zone Capacity: 1.913.760 I 23:15:24 Optimal L0 Data Zone Method: Copied From Original Disc I 23:15:29 Set L0 Data Zone Capacity Succeeded! I 23:15:30 Filling Buffer... (40 MB) I 23:15:30 Writing LeadIn... I 23:15:33 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 23:15:33 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 23:15:33 Writing Layer 0... (LBA: 0 - 1913759) W 23:17:12 Waiting for buffers to recover... (LBA: 244640) W 23:17:20 Waiting for hard disk activity to reach threshold level... I 23:17:24 Writing Sectors... I 23:27:54 Writing Layer 1... (LBA: 1913760 - 3827487) I 23:40:06 Synchronising Cache... I 23:40:07 Closing Track... ImgBurn.log Edited January 8, 2011 by Koekwous
ianymaty Posted January 9, 2011 Posted January 9, 2011 I 23:15:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x)(other brand but same problem with Verbatin)W 23:15:24 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x) W 23:17:12 Waiting for buffers to recover... (LBA: 244640) W 23:17:20 Waiting for hard disk activity to reach threshold level... Try the other speeds too, 2.4x is not even an option in your drive/firmware/media combination, so you left with 6x and 8x. Don't tell us that you have to burn them at exactly at 2.4x. All you need is a good quality burn at whatever speed your combination can produce it. Your hard disk is having trouble feeding the drive with data. Do you used it for other tasks while burning?
Koekwous Posted January 9, 2011 Author Posted January 9, 2011 I 23:15:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x)(other brand but same problem with Verbatin)W 23:15:24 Write Speed Miscompare! - Wanted: 3.324 KB/s (2,4x), Got: 5.540 KB/s (4x) W 23:17:12 Waiting for buffers to recover... (LBA: 244640) W 23:17:20 Waiting for hard disk activity to reach threshold level... Try the other speeds too, 2.4x is not even an option in your drive/firmware/media combination, so you left with 6x and 8x. Don't tell us that you have to burn them at exactly at 2.4x. All you need is a good quality burn at whatever speed your combination can produce it. Your hard disk is having trouble feeding the drive with data. Do you used it for other tasks while burning? Thanks for your reply. First of all I didn't come up with the writingspeed of 2.4 but that's the information that has been giving to me by several guides 'how tot burn Xbox360 Games'. It appears that faster burningrate wouldn't work. The other tasks while burning are in the network (Synology NAS) so that shouldn't influence the performance of the pc. Questions that remains is why both IMGBURN and Nero have trouble closing and finalizing the desk. Hope to hear.
ianymaty Posted January 9, 2011 Posted January 9, 2011 Writing at 2.4x is an old story back when there wasn't a big support for buffer underruns and is not actual anymore this days. As I said, you need a good quality burn, the console or any other player don't know at wich speed was burn a particular disc. It just plays it or not. You have to find out by trial and error what speed produces a good reliable or the best burn in your drive/firmware/media combination. Not always but sometimes the hard disk activity can render in some timeouts that some drive's firmware can't handle well. In youre case was just a warning.
Koekwous Posted January 9, 2011 Author Posted January 9, 2011 Thanks a lot ISF Guru, that solves the issue around the speed. Unfortunatly the closing disc issue remains. This problems is bigger then the speed of burning, because the discs exactly don't work at all at the console. Does anybody have an idea how this problem can be solved?! Thanks
LIGHTNING UK! Posted January 9, 2011 Posted January 9, 2011 What type of machine do you have? AMD or Intel? Is the drive connected to the proper AMD/Intel chipset controller or is it on a 3rd party one from the likes of JMicron/Marvell etc?
Koekwous Posted January 9, 2011 Author Posted January 9, 2011 What type of machine do you have? AMD or Intel? Is the drive connected to the proper AMD/Intel chipset controller or is it on a 3rd party one from the likes of JMicron/Marvell etc? Hello, I have a AMD Athlon 7450 Dual-Core processor 2.40GHZ 32 bits Windows Home Premium. The DVD Drive is part of the pc, so I guess it's connected to the AMD chipset (not sure what you mean with that) Thanks for the reply!
LIGHTNING UK! Posted January 9, 2011 Posted January 9, 2011 Out of interest, is it ok with single layer DVD+R discs? If you have the exact same 'closing track' issue with Verbatim (MKM-001-00 or MKM-003-00) DL discs too, we have to assume it's something outside of the drive/firmware/media combo that's causing it to get stuck. Do you know what motherboard you have in the PC? All I can suggest is visiting the AMD (or NVIDIA if that's the chipset on the board) website and installing the latest chipset/controller drivers for your OS.
Koekwous Posted January 9, 2011 Author Posted January 9, 2011 Out of interest, is it ok with single layer DVD+R discs? If you have the exact same 'closing track' issue with Verbatim (MKM-001-00 or MKM-003-00) DL discs too, we have to assume it's something outside of the drive/firmware/media combo that's causing it to get stuck. Do you know what motherboard you have in the PC? All I can suggest is visiting the AMD (or NVIDIA if that's the chipset on the board) website and installing the latest chipset/controller drivers for your OS. Funny thing is that after the closing disc/finalizing issue I get the following problem when I start up IMGBurn (see attachment ImgBurn2)I have to close IMGBurn by using Taskmanager . When I restart my computer the problem is gone. About your question if single layer has the same problem, the answer is no. But the program gets stuckt with cycling the tray. I included the log (ImgBurn3.log) The info about my pc is: Bios Phoenix-Award WorkstationBios v6.00PG / DirectX 11 (enclosed attachment DXDiag) ImgBurn2.log ImgBurn3.log DxDiag.txt
Cynthia Posted January 9, 2011 Posted January 9, 2011 According to this ACER page you have nVidia chipset. http://support.acer.com/us/en/product_support.aspx?tab=1 There is an option to find motherboards drivers by automatic in option 2. http://www.nvidia.co.uk/Download/index.aspx?lang=en-uk
Koekwous Posted January 9, 2011 Author Posted January 9, 2011 According to this ACER page you have nVidia chipset. http://support.acer.com/us/en/product_support.aspx?tab=1 There is an option to find motherboards drivers by automatic in option 2. http://www.nvidia.co.uk/Download/index.aspx?lang=en-uk GeForce 8200P / GeForce 8200P-A-AR -- Your PC currently has the latest driver installed for your motherboard. No driver update is necessary at this time. Any suggestions anyone?
Koekwous Posted January 9, 2011 Author Posted January 9, 2011 Cynthia, I did update the Graphics Driver. I guess that doesn't make much difference on the performance of ImgBurn or any burningproces. I'm still stuck
Cynthia Posted January 9, 2011 Posted January 9, 2011 Did the computer came with that burner pre installed? Edit: Saw that you bought if afterwards. Have you tried to connect it to another SATA connector inside the computer?
Koekwous Posted January 9, 2011 Author Posted January 9, 2011 No, I bought the burner this week after I had failures while using the original burner (Hitachi/LG GH40F). They Advised me to buy a new burner which I did and now the problem isn't while burning but with finalizing the disc.
Koekwous Posted January 9, 2011 Author Posted January 9, 2011 Nope, used the same as the original burner
Cynthia Posted January 9, 2011 Posted January 9, 2011 I 14:33:54 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x; 6x; 8x; 12x; 16x; 18x; 20x)I 14:33:54 Destination Media Sectors: 2.295.104 I 14:33:54 Write Mode: DVD I 14:33:54 Write Type: DAO I 14:33:54 Write Speed: MAX Have you tried a lower write speed such as 8x? Could be that 20x is to high and the burn is that crappy that it can't be read.
Koekwous Posted January 9, 2011 Author Posted January 9, 2011 Problem isn't with single layer but with DL.
Cynthia Posted January 9, 2011 Posted January 9, 2011 Problem isn't with single layer but with DL. This looks like an issue with single layer discs. W 14:44:04 Waiting for device to become ready...I 14:56:31 Abort Request Acknowledged But burning at 20x with that burner on Verbatims shouldn't be a problem. Just tried one made in Taiwan. I 18:14:31 ImgBurn Version 2.5.4.0 started!I 18:14:31 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 18:14:31 Total Physical Memory: 4 193 460 KB - Available: 2 077 280 KB I 18:14:31 Initialising SPTI... I 18:14:31 Searching for SCSI / ATAPI devices... I 18:14:31 -> Drive 1 - Info: PIONEER DVD-RW DVR-115D 1.22 (M:) (ATA) I 18:14:32 -> Drive 2 - Info: PIONEER DVD-RW DVR-118L 1.02 (N:) (ATA) I 18:14:32 -> Drive 3 - Info: ATAPI iHAS120 6 7L0M (O:) (SATA) I 18:14:32 -> Drive 4 - Info: DVDFab Virtual Drive 1.0 (H:) (SCSI) I 18:14:32 -> Drive 5 - Info: PHANTOM DVD-RAM DVDR V10 88.0 (R:) (SCSI) I 18:14:32 -> Drive 6 - Info: PIONEER DVD-RW DVR-216D 1.09 (P:) (SATA) I 18:14:32 -> Drive 7 - Info: Optiarc DVD RW AD-7260S 1.03 (I:) (USB) I 18:14:32 Found 2 DVD±RWs, 3 DVD±RW/RAMs, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 18:15:46 Operation Started! I 18:15:46 Source File: -==/\/[DISCOVERY IMAGE]\/\==- I 18:15:46 Source File Sectors: 2 295 104 (MODE1/2048) I 18:15:46 Source File Size: 4 700 372 992 bytes I 18:15:46 Source File Volume Identifier: IMGBURN_DISCOVERY_IMAGE I 18:15:46 Source File Volume Set Identifier: 2295104_SECTORS I 18:15:46 Source File Application Identifier: IMGBURN V2.5.4.0 - THE ULTIMATE IMAGE BURNER! I 18:15:46 Source File Implementation Identifier: ImgBurn v2.5.4.0 I 18:15:46 Source File File System(s): ISO9660 I 18:15:46 Destination Device: [0:0:0] Optiarc DVD RW AD-7260S 1.03 (I:) (USB) I 18:15:46 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x; 6x; 8x; 12x; 16x; 18x; 20x) I 18:15:46 Destination Media Sectors: 2 295 104 I 18:15:46 Write Mode: DVD I 18:15:46 Write Type: DAO I 18:15:46 Write Speed: MAX I 18:15:46 DVD+R Reserve Track: Yes I 18:15:46 Link Size: Auto I 18:15:46 Lock Volume: Yes I 18:15:46 Test Mode: No I 18:15:46 OPC: Yes I 18:15:46 BURN-Proof: Enabled I 18:15:46 Write Speed Successfully Set! - Effective: 27 700 KB/s (20x) I 18:15:46 Book Type Setting: DVD+R I 18:15:58 Filling Buffer... (40 MB) I 18:15:58 Writing LeadIn... I 18:16:01 Writing Session 1 of 1... (1 Track, LBA: 0 - 2295103) I 18:16:01 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2295103) I 18:20:15 Synchronising Cache... I 18:20:16 Closing Track... I 18:20:17 Finalising Disc... I 18:20:41 Exporting Graph Data... I 18:20:42 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7260S_1.03_DEN-9-JANUARI-2011_18-15_MCC-004-00_MAX.ibg I 18:20:42 Export Successfully Completed! I 18:20:42 Operation Successfully Completed! - Duration: 00:04:55 I 18:20:42 Average Write Rate: 18 143 KB/s (13.1x) - Maximum Write Rate: 27 883 KB/s (20.1x) I 18:20:42 Cycling Tray before Verify... W 18:20:51 Waiting for device to become ready... I 18:21:01 Device Ready! I 18:21:02 Operation Started! I 18:21:02 Source Device: [0:0:0] Optiarc DVD RW AD-7260S 1.03 (I:) (USB) I 18:21:02 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: MCC-004-00) (Speeds: 4x; 6x; 8x; 12x; 16x; 18x; 20x) I 18:21:02 Image File: -==/\/[DISCOVERY IMAGE]\/\==- I 18:21:02 Image File Sectors: 2 295 104 (MODE1/2048) I 18:21:02 Image File Size: 4 700 372 992 bytes I 18:21:02 Image File Volume Identifier: IMGBURN_DISCOVERY_IMAGE I 18:21:02 Image File Volume Set Identifier: 2295104_SECTORS I 18:21:02 Image File Application Identifier: IMGBURN V2.5.4.0 - THE ULTIMATE IMAGE BURNER! I 18:21:02 Image File Implementation Identifier: ImgBurn v2.5.4.0 I 18:21:02 Image File File System(s): ISO9660 I 18:21:02 Read Speed (Data/Audio): MAX / MAX I 18:21:02 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2295103) I 18:21:02 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2295103) I 18:26:09 Exporting Graph Data... I 18:26:09 Graph Data File: C:\Users\Cynthia\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7260S_1.03_DEN-9-JANUARI-2011_18-15_MCC-004-00_MAX.ibg I 18:26:09 Export Successfully Completed! I 18:26:09 Operation Successfully Completed! - Duration: 00:05:01 I 18:26:09 Average Verify Rate: 15 300 KB/s (11.0x) - Maximum Verify Rate: 22 353 KB/s (16.1x)
Cynthia Posted January 9, 2011 Posted January 9, 2011 Did you have the similar issues with the burner you replaced?
Koekwous Posted January 9, 2011 Author Posted January 9, 2011 (edited) issue with old burner were I/O errors with sector problems, these were solved with the new burner. The issue isn't about the burningspeed anymore, there where I thought that a burning speed of 2.4 was mandatory for brning xbox360 games. The issue is about closing disc/finalizing which isn't working with dl discs. The firmware of Burner, motherboard etc is up to date, the burner does burn SL (eventhough the speed in the topic is to high). I'm still looking to burn DL on my PC. Tried again, no result: I 19:13:40 ImgBurn Version 2.5.4.0 started! I 19:13:40 Microsoft Windows 7 Home Premium Edition (6.1, Build 7600) I 19:13:40 Total Physical Memory: 2.882.100 KB - Available: 1.972.332 KB W 19:13:40 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 19:13:40 Initialising SPTI... I 19:13:40 Searching for SCSI / ATAPI devices... I 19:13:40 -> Drive 1 - Info: Optiarc DVD RW AD-7263S 1.03 (E:) (SATA) I 19:13:40 Found 1 DVD±RW/RAM! I 19:13:58 Operation Started! I 19:13:58 Source File: D:\Downloads\XBox 360\Kinect Sports\mvl-ksks.dvd I 19:13:58 Source File Sectors: 3.827.488 (MODE1/2048) I 19:13:58 Source File Size: 7.838.695.424 bytes I 19:13:58 Source File Volume Identifier: DVD_ROM I 19:13:58 Source File Volume Set Identifier: 1b018000MS UDFBridge I 19:13:58 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:13:58 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 19:13:58 Source File File System(s): ISO9660; UDF (1.50) I 19:13:58 Destination Device: [4:0:0] Optiarc DVD RW AD-7263S 1.03 (E:) (SATA) I 19:13:58 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x) I 19:13:58 Destination Media Sectors: 4.173.824 I 19:13:58 Write Mode: DVD I 19:13:58 Write Type: DAO I 19:13:58 Write Speed: 8x I 19:13:58 Link Size: Auto I 19:13:58 Lock Volume: Yes I 19:13:58 Test Mode: No I 19:13:58 OPC: No I 19:13:58 BURN-Proof: Enabled I 19:13:58 Write Speed Successfully Set! - Effective: 11.080 KB/s (8x) I 19:13:58 Book Type Setting: DVD-ROM I 19:13:58 User Specified L0 Data Zone Capacity: 1.913.760 I 19:14:04 Set L0 Data Zone Capacity Succeeded! I 19:14:05 Filling Buffer... (40 MB) I 19:14:06 Writing LeadIn... I 19:14:09 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 19:14:09 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 19:14:09 Writing Layer 0... (LBA: 0 - 1913759) W 19:17:49 Waiting for buffers to recover... (LBA: 559360) W 19:18:00 Waiting for hard disk activity to reach threshold level... I 19:18:01 Writing Sectors... I 19:26:33 Writing Layer 1... (LBA: 1913760 - 3827487) I 19:35:20 Synchronising Cache... I 19:35:22 Closing Track... Edited January 10, 2011 by Koekwous
LIGHTNING UK! Posted January 10, 2011 Posted January 10, 2011 Try in safe mode. Try from an Ubuntu Live CD (install 'Wine' and then use that to install/run ImgBurn). Try your drive + media in another PC - ideally, one with an intel chipset. You could also try a 3rd party PCI/PCIe card (from Silicon Image or JMicron) and put the drive on that rather than the nvidia controller.
Recommended Posts