GunMetalBlue Posted January 15, 2011 Posted January 15, 2011 I'm new to the forum. I’ve been using imgburn for about two months now. I’ve been burning disks since about 1998 with various different disks and software. I will say that img burn is probably the best burning software that I’ve seen. I have burnt several dvds with img burn successfully and sum unsuccessfully that were obviously my operator issues. The latest disk that I’ve tried to run the first copy burnt and verified successfully but the second one, at 50% verify got unrecoverable read errors. This has also happened with a few others. The only time I’ve got this error was with the DVD+R DL (RITEK-S04-66). The iso was generated with imgburn build mode and made with a “good” layer break. My question is that, could the read errors come from the drive changing directions at the layer break during the write or the verify? I 09:51:19 Operation Started! I 09:51:19 Source File: O:\PIRANHA.MDS I 09:51:19 Source File Sectors: 4,028,256 (MODE1/2048) I 09:51:19 Source File Size: 8,249,868,288 bytes I 09:51:19 Source File Volume Identifier: PIRANHA I 09:51:19 Source File Volume Set Identifier: 3E2E8DE2003D7758 I 09:51:19 Source File Application Identifier: IMGBURN V2.5.4.0 - THE ULTIMATE IMAGE BURNER! I 09:51:19 Source File Implementation Identifier: ImgBurn I 09:51:19 Source File File System(s): ISO9660, UDF (1.02) I 09:51:19 Destination Device: [0:0:0] _NEC DVD_RW ND-2510A 2.19 (F:) (USB) I 09:51:19 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 09:51:19 Destination Media Sectors: 4,173,824 I 09:51:19 Write Mode: DVD I 09:51:19 Write Type: DAO I 09:51:19 Write Speed: 2.4x I 09:51:19 Link Size: Auto I 09:51:19 Lock Volume: Yes I 09:51:19 Test Mode: No I 09:51:19 OPC: No I 09:51:19 BURN-Proof: Enabled I 09:51:19 Write Speed Successfully Set! - Effective: 3,245 KB/s (2.4x) I 09:51:19 Book Type Setting: DVD-ROM I 09:51:19 Optimal L0 Data Zone Capacity: 2,014,128 I 09:51:19 Optimal L0 Data Zone Method: Copied From Original Disc I 09:51:52 Set L0 Data Zone Capacity Succeeded! I 09:51:52 Filling Buffer... (40 MB) I 09:51:57 Writing LeadIn... I 09:51:59 Writing Session 1 of 1... (1 Track, LBA: 0 - 4028255) I 09:51:59 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4028255) I 09:51:59 Writing Layer 0... (LBA: 0 - 2014127) I 10:11:57 Writing Layer 1... (LBA: 2014128 - 4028255) I 10:31:59 Synchronising Cache... I 10:32:00 Closing Track... I 10:32:01 Finalising Disc... I 10:32:56 Exporting Graph Data... I 10:32:56 Graph Data File: C:\Documents and Settings\Application Data\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-2510A_2.19_SATURDAY-JANUARY-15-2011_9-51_AM_RITEK-S04-66_2.4x.ibg I 10:32:56 Export Successfully Completed! I 10:32:56 Operation Successfully Completed! - Duration: 00:41:36 I 10:32:56 Average Write Rate: 3,358 KB/s (2.4x) - Maximum Write Rate: 3,473 KB/s (2.5x) I 10:32:56 Cycling Tray before Verify... I 10:33:26 Device Ready! I 10:33:32 Operation Started! I 10:33:32 Source Device: [0:0:0] _NEC DVD_RW ND-2510A 2.19 (F:) (USB) I 10:33:32 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 10:33:32 Image File: O:\PIRANHA.MDS I 10:33:32 Image File Sectors: 4,028,256 (MODE1/2048) I 10:33:32 Image File Size: 8,249,868,288 bytes I 10:33:32 Image File Volume Identifier: PIRANHA I 10:33:32 Image File Volume Set Identifier: 3E2E8DE2003D7758 I 10:33:32 Image File Application Identifier: IMGBURN V2.5.4.0 - THE ULTIMATE IMAGE BURNER! I 10:33:33 Image File Implementation Identifier: ImgBurn I 10:33:33 Image File File System(s): ISO9660, UDF (1.02) I 10:33:33 Read Speed (Data/Audio): MAX / MAX I 10:33:33 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4028255) I 10:33:33 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4028255) I 10:33:33 Verifying Layer 0... (LBA: 0 - 2014127) I 10:49:03 Verifying Layer 1... (LBA: 2014128 - 4028255) W 10:49:18 Failed to Read Sector 2014688 - Reason: Unrecovered Read Error W 10:49:18 Sector 2014688 maps to File: \VIDEO_TS\VTS_02_1.VOB E 10:51:32 Failed to Read Sector 2014688 - Reason: Unrecovered Read Error E 10:51:32 Sector 2014688 maps to File: \VIDEO_TS\VTS_02_1.VOB E 10:51:32 Failed to Verify Sectors! I 10:51:32 Exporting Graph Data... I 10:51:32 Graph Data File: C:\Documents and Settings\Application Data\ImgBurn\Graph Data Files\_NEC_DVD_RW_ND-2510A_2.19_SATURDAY-JANUARY-15-2011_9-51_AM_RITEK-S04-66_2.4x.ibg I 10:51:32 Export Successfully Completed! E 10:51:32 Operation Failed! - Duration: 00:17:59 I 10:51:32 Average Verify Rate: 3,734 KB/s (2.7x) - Maximum Verify Rate: 6,267 KB/s (4.5x)
LIGHTNING UK! Posted January 15, 2011 Posted January 15, 2011 Your drive has no firmware support for RITEK-S04-66 media, it's just too old. If you've burn any of those discs successfully, it was just luck.
GunMetalBlue Posted January 17, 2011 Author Posted January 17, 2011 Thanks for the reply. I tried the disk in a different drive and the verify was successful. I guess after 7 years it's time to retire the NEC 2510. Anyone have any suggestions on new burners? Don't have to be the latest and greatest, just something to give me the most bang for my buck.
kenbra Posted January 17, 2011 Posted January 17, 2011 Thanks for the reply. I tried the disk in a different drive and the verify was successful. I guess after 7 years it's time to retire the NEC 2510. Anyone have any suggestions on new burners? Don't have to be the latest and greatest, just something to give me the most bang for my buck. also you might want to update imageburn
Recommended Posts