Failed to set L0 data zone capacity I dont know what to do

[Stealth Iceman]

I am at my wits end I am using the same DL disks in my desktop and there is no problem. I run into a problem when I try using my laptop to burn the media...Here is the log.

 

 

I 08:59:07 ImgBurn Version 2.5.2.0 started!

I 08:59:07 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 08:59:07 Total Physical Memory: 2,087,344 KB - Available: 1,690,772 KB

I 08:59:07 Initialising SPTI...

I 08:59:07 Searching for SCSI / ATAPI devices...

I 08:59:07 -> Drive 1 - Info: HL-DT-ST DVDRAM GMA-4080N 0G41 (E:) (ATA)

I 08:59:07 Found 1 DVD±RW/RAM!

I 08:59:33 Operation Started!

I 08:59:33 Source File: C:\Documents and Settings\Iceman\Desktop\mvl-gtae.dvd

I 08:59:33 Source File Sectors: 3,827,488 (MODE1/2048)

I 08:59:33 Source File Size: 7,838,695,424 bytes

I 08:59:33 Source File Volume Identifier: DVD_ROM

I 08:59:33 Source File Volume Set Identifier: fd244000MS UDFBridge

I 08:59:34 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 08:59:34 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 08:59:34 Source File File System(s): ISO9660, UDF (1.50)

I 08:59:34 Destination Device: [0:1:0] HL-DT-ST DVDRAM GMA-4080N 0G41 (E:) (ATA)

I 08:59:34 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x)

I 08:59:34 Destination Media Sectors: 4,173,824

I 08:59:34 Write Mode: DVD

I 08:59:34 Write Type: DAO

I 08:59:34 Write Speed: 2.4x

I 08:59:34 Link Size: Auto

I 08:59:34 Lock Volume: Yes

I 08:59:34 Test Mode: No

I 08:59:34 OPC: No

I 08:59:34 BURN-Proof: Enabled

I 08:59:34 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)

I 08:59:34 Book Type Setting: N/A

I 08:59:34 User Specified L0 Data Zone Capacity: 1,913,760

E 08:59:39 Set L0 Data Zone Capacity Failed! - Reason: Write Error

E 08:59:39 Operation Failed! - Duration: 00:00:05

I 08:59:39 Average Write Rate: N/A - Maximum Write Rate: N/A

 

 

My drive is a GMA-4080n

Laptop is a Gateway MX 6124

Windows XP SP3

I cannot find a firmware update for the drive

[LIGHTNING UK!]

http://forum.imgburn.com/index.php?showtopic=8000

[Stealth Iceman]

As I said at the top of my post I use the same DL Media in my desktop and the program runs fine I am forced to use my Laptop because my burner on my desktop will not burn lower than 4x

[Cynthia]

Why do you need to burn lower than 4x?

[Stealth Iceman]

Xbox 360 game Backups

[LIGHTNING UK!]

Compatibility isn't as simple as, if it works in one drive it'll work in any drive.

 

The drive in your laptop doesn't like the discs. So either you change the disc or you change the drive in your laptop. It's as simple as that.

 

Burning at 2.4x is an old myth. If you can get a decent quality burn at 500000000x in your drive (yes, I know that speed isn't actually possible), it'll still work perfectly fine.