rideon Posted July 20, 2006 Posted July 20, 2006 (edited) Hi Guys, I've been having a lot of problems burning Verbatim 2.4x MKM-001-00 on a LITE-ON SHM-165P6S. Someone on the cdfreals forum suggested I ask here if you can spread any light on my problems Instead of copying everything here, please take a look at the cdfreaks forum for some screenies and more explanation in my thread (http://club.cdfreaks.com/showthread.php?t=186748) copied from my thread @ cdfreaks: This litey seems to be OK, not perfect scans by any means but I can live with it. It even seemed to burn a DL disc fine yesterday That is until today when I tried to burn a DL disc, which failed half way through with a "power calibration area error send dvd structure boundary information DVD+R DL" error (forgot to copy the exact wording ) I then tried again, and this time it spat the disc out before even starting the burn at the "setting L0 capactiy". It then pretends to close and finalise the disc (I copied the log from ImgBurn) (which it doesn't as the same disc is now burning in my pio 109) The discs I am using are Verbatim 2.4x, made in Singapore, which came in a 10 Spindle. Software is ImgBurn, using a MDF/MDS image. The drive is running MS0P stock firmware. I've only got HPT ticked in Smartburn. Tried it with it off, same result. I 20:16:16 Source File Sectors: 3,421,947 (MODE1/2048) I 20:16:16 Source File Size: 7,008,147,456 bytes I 20:16:16 Source File Volume Identifier: CNDV_60M_EW_1_A I 20:16:16 Source File UDF Revision: 1.02 I 20:16:16 Destination Device: [0:0:0] LITE-ON DVDRW SHM-165P6S MS0P (E:) (ATA) I 20:16:16 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x) I 20:16:16 Destination Media Sectors: 4,173,824 I 20:16:16 Write Mode: DVD I 20:16:16 Write Type: DAO I 20:16:16 Write Speed: 2.4x I 20:16:16 Link Size: Auto I 20:16:16 Test Mode: No I 20:16:16 BURN-Proof: Enabled I 20:16:16 Optimal L0 Data Zone Capacity: 1,737,888 I 20:16:16 Optimal L0 Data Zone Method: Copied From Original Disc I 20:16:25 Filling Buffer... I 20:16:26 Writing LeadIn... W 20:16:26 Failed to Write Sectors 0 - 31 - Power Calibration Area Error W 20:16:26 Retrying (1 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (2 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (3 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (4 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (5 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (6 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (7 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (8 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (9 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (10 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (11 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (12 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (13 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (14 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (15 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (16 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (17 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (18 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (19 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error W 20:16:26 Retrying (20 of 20)... W 20:16:26 Retry Failed - Power Calibration Area Error E 20:16:27 Failed to Write Sectors 0 - 31 - Power Calibration Area Error I 20:16:27 Synchronising Cache... I 20:16:28 Closing Track... I 20:16:29 Finalising Disc... E 20:16:30 Failed to Write Image! E 20:16:33 Operation Failed! - Duration: 00:00:14 I 20:16:33 Average Write Rate: N/A - Maximum Write Rate: N/A I then got it to start burning a different image (diff size, L0 point) but it failed right at the end: W 21:41:34 Potential 'WaitImmediateIO' Deferred Error - Power Calibration Area Error W 21:41:39 Potential 'WaitImmediateIO' Deferred Error - Power Calibration Area Error E 21:41:46 Close Track Failed! - Reason: No Additional Sense Information I 21:41:46 Finalising Disc... E 21:43:48 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session look here for a bit more info: http://club.cdfreaks.com/showthread.php?t=186748 any ideas? thanks Edited July 20, 2006 by rideon
LIGHTNING UK! Posted July 21, 2006 Posted July 21, 2006 I'd already seen this over at cdfreaks actually - I didn't really have anything to say on the matter when it was over there! Something about drive just doesn't like the media. The media might be fine, it could be that the drive is faulty.... or it could be the other way around. It really is anyones guess! Either way, there is nothing I can do about I'm afraid, the ball it most certainly in your own court. Perhaps one of the newer 'test' firmware will do a better job? You can find those back at cdfreaks.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now