Help wont pick up disc

HelotesHick · January 31, 2011

Yes i used imgburn 3 times everything was OK but then i try to use it again and it wont pick up my disc that i put in. can someone plz help me

**Cynthia** · January 31, 2011

What does it say in the status bar in the lower left corner?

HelotesHick · January 31, 2011

Device Not Ready (no Reference position Found)

**ianymaty** · January 31, 2011

Try a new disc from the spindle.

Can you post a log of a burned disc? Look in the pink box above for instruction how to.

HelotesHick · January 31, 2011

I 13:33:20 ImgBurn Version 2.5.5.0 started!

I 13:33:20 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 13:33:20 Total Physical Memory: 1,308,672 KB - Available: 521,320 KB

W 13:33:20 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 13:33:20 Initialising SPTI...

I 13:33:20 Searching for SCSI / ATAPI devices...

I 13:33:20 -> Drive 1 - Info: ATAPI DVD A LH-1H18A HG44 (E:) (ATA)

I 13:33:20 -> Drive 2 - Info: SAMSUNG CD-ROM SC-148C B105 (D:) (ATA)

I 13:33:20 -> Drive 3 - Info: MagicISO Virtual DVD-ROM 1.0A (G:) (Unknown)

I 13:33:20 Found 1 CD-ROM, 1 DVD-ROM and 1 DVD±RW/RAM!

**ianymaty** · January 31, 2011

This drive is a clone of Lite-On LH-18A1H.

Try updating the last firmware listed for Lite-On and try again http://www.firmwarehq.com/Ativa/LH-1H18A/files.html

HelotesHick · February 1, 2011

no matched drive detected

This utility is only for LITE-ON DVDRW LH-18A1H DRIVE

DETECTED drives:

1-0-0-0 D:SAMSUNG CD-ROM SC_148C B105

1-0-1-0 E:ATAPI DVD A LH-!H18A HG44

2-0-0-0 G:MagicISOVirtual DVD-ROM 1.0A

**ianymaty** · February 1, 2011

Disconnect the Samsung drive and leave the writer as master single on cable.

Try flashing the drive again.

**LIGHTNING UK!** · February 1, 2011

As the device ID doesn't match, you'd have to flash the bin file using a 3rd party flasher.

I'm sure you could find more on the subject over at MyCE (CDFreaks).

Recommended Posts