Layer Break Problem

[PatrickSD]

I am having a problem using ImgBurn to burn a VIDEO_TS folder to a DVD. I am using Verbatim DVD+RW DL discs.

 

I know there is another thread about a similar issue, but it doesn't really answer my questions, so I will try again.

 

I am following the Guide that tells how to burn to double layered disk. When the guide tells me to "Press the calculator to make sure your project will fit on Dual Layer media" and I do, I get the following messages:

 

E 16:29:02 Unable to find any cells that could be used for the layer break!

E 16:29:03 The layer break must be between sectors 834192 and 2086912.

E 16:29:03 Sector 834192 falls within VTS_01 (Title), which starts at sector 349.

E 16:29:03 Relative to the start of VTS_01 (Title), the layer break must be between sectors 833843 and 2086563.

E 16:29:03 Relative sector 833843 falls within PGC 1, Cell 1, which starts at relative sector 0.

E 16:29:03 Relative to the start of Cell 1, try splitting between sectors 833843 (1628.6 MB) and 2086563 (4075.32 MB).

E 16:29:03 Operation Failed! - Duration: 00:00:34

 

Can anyone tell me what the problem is or how I can fix this. I have tried DVD Flick and got the same error.

I am new to this and do not really understand all the technical stuff.

Thanks for any help.

[Cynthia]

You need to apply this fix.

 

http://forum.imgburn.com/index.php?showtopic=6376

[PatrickSD]

You need to apply this fix.

 

http://forum.imgburn.com/index.php?showtopic=6376

 

Thank you, got it!