hdtshare Posted February 8, 2011 Share Posted February 8, 2011 (edited) Hi guys, İ burned about 10 tdk bd-50 DL without any problem but today when im trying to burn I/O error. Also my BD-Rewriter brand new. Bought 2 weeks ago. Dont tell me firmware update cause im using latest version.i burned same media 30 mins ago with success, after 30 mins tried to burn same media got this error; Can you help me guys ? its really annoying and stupid problem ... Thank you, IMGBURN LOG: I 21:46:22 Destination Device: [1:0:0] HL-DT-ST BD-RE BH10LS30 1.00 (G (ATA) I 21:46:22 Destination Media Type: BD-R (Disc ID: TDKBLD-RFB-000) (Speeds: 2x; 4x) I 21:46:22 Destination Media Sectors: 24.438.784 I 21:46:22 Write Mode: BD I 21:46:22 Write Type: DAO I 21:46:22 Write Speed: 2x I 21:46:22 BD-R Verify Not Required: Yes I 21:46:22 Link Size: Auto I 21:46:22 Lock Volume: Yes I 21:46:22 Test Mode: No I 21:46:22 OPC: No I 21:46:22 BURN-Proof: Enabled I 21:46:22 Write Speed Successfully Set! - Effective: 8.991 KB/s (2x) I 21:47:10 Filling Buffer... (40 MB) I 21:47:11 Writing LeadIn... I 21:47:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 21434431) I 21:47:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 21434431) I 21:47:12 Writing Layer 0... (LBA: 0 - 12219391) W 22:31:08 Failed to Write Sectors 11508512 - 11508543 - Reason: Write Error W 22:31:08 Retrying (1 of 20)... W 22:31:08 Retry Failed - Reason: Invalid Address For Write W 22:31:08 Retrying (2 of 20)... W 22:31:08 Retry Failed - Reason: Invalid Address For Write W 22:31:08 Retrying (3 of 20)... W 22:31:08 Retry Failed - Reason: Invalid Address For Write W 22:31:08 Retrying (4 of 20)... W 22:31:08 Retry Failed - Reason: Invalid Address For Write W 22:31:08 Retrying (5 of 20)... W 22:31:08 Retry Failed - Reason: Invalid Address For Write W 22:31:08 Retrying (6 of 20)... W 22:31:08 Retry Failed - Reason: Invalid Address For Write W 22:31:08 Retrying (7 of 20)... W 22:31:08 Retry Failed - Reason: Invalid Address For Write W 22:31:08 Retrying (8 of 20)... W 22:31:08 Retry Failed - Reason: Invalid Address For Write W 22:31:08 Retrying (9 of 20)... W 22:31:08 Retry Failed - Reason: Invalid Address For Write W 22:31:08 Retrying (10 of 20)... Edited February 8, 2011 by hdtshare Link to comment Share on other sites More sharing options...
ianymaty Posted February 8, 2011 Share Posted February 8, 2011 Try 4x it might get to the end succesfuly. Are you sure you are using the latest firmware 1.00-09 http://www.firmwarehq.com/LG/BH10LS30/files.html You should post the full log. Link to comment Share on other sites More sharing options...
hdtshare Posted February 8, 2011 Author Share Posted February 8, 2011 Try 4x it might get to the end succesfuly. Are you sure you are using the latest firmware 1.00-09 http://www.firmwarehq.com/LG/BH10LS30/files.html You should post the full log. Here is about firmware; so it is latest right ? And one more thing, when i burned with succesfully 5 disc before i was using external hdd over usb. I think maybe problem in HDD or mainboard or sata cables ? because i bought today 2 TB seagate brand new. so its really complicated.... i can burn BD-50 over USB HDD but i can not burn over my internal hard drives.... Link to comment Share on other sites More sharing options...
ianymaty Posted February 9, 2011 Share Posted February 9, 2011 Changed: Show a little more firmware version information for LG drives on the Device Capabilities window and when checking for firmware updates. This is useful for drives like the BH10LS30 that display 1.00 when the full version number might actually be 1.00-A9. Update ImgBurn to current version and go to any mode, rightclick on the drive or go to Tools menu and select Capabilities, there you will see the exact firmware version, if it has or not -09 sufix. Update latest chipset/controler drivers on your motherboard. Link to comment Share on other sites More sharing options...
Recommended Posts