" finalise disk failed " PLEASE help :( :( !!

[hitmansweden]

ive ruined 4-5 x DL disks now failing to finalize the disk ... it worked few times before but not now, i tried reading all the former post but nothing..

 

here is what ive done,

 

using img burn, updated my firmwire on the burner (a optiarc dvd rw ad-7240s), i set the dual later settings right ,1913760 , and tried buring at 2,4 , 2 and 4x speed. nothing . baaah

 

whats going on please help me.

 

this is the log below.. not using verbatim disks atm but it should not be a prob my friends using the same without probs, as i said, i tried following alot of guides.

 

 

 

I 16:50:07 ImgBurn Version 2.5.4.0 started!

I 16:50:07 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600)

I 16:50:07 Total Physical Memory: 6 282 360 KB - Available: 4 325 736 KB

I 16:50:07 Initialising SPTI...

I 16:50:07 Searching for SCSI / ATAPI devices...

I 16:50:07 -> Drive 1 - Info: Optiarc DVD RW AD-7240S 1.04 (F:) (ATA)

I 16:50:07 Found 1 DVD±RW/RAM!

I 16:50:55 Operation Started!

I 16:50:55 Source File: D:\utorrent\Dead.Space.2.XBOX360-COMPLEX\DVD1\cpx-ds2a.dvd

I 16:50:55 Source File Sectors: 3 827 488 (MODE1/2048)

I 16:50:55 Source File Size: 7 838 695 424 bytes

I 16:50:55 Source File Volume Identifier: DVD_ROM

I 16:50:55 Source File Volume Set Identifier: ec67c000MS UDFBridge

I 16:50:55 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 16:50:55 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 16:50:55 Source File File System(s): ISO9660; UDF (1.50)

I 16:50:55 Destination Device: [5:0:0] Optiarc DVD RW AD-7240S 1.04 (F:) (ATA)

I 16:50:55 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x)

I 16:50:55 Destination Media Sectors: 4 173 824

I 16:50:55 Write Mode: DVD

I 16:50:55 Write Type: DAO

I 16:50:55 Write Speed: 4x

I 16:50:55 Link Size: Auto

I 16:50:55 Lock Volume: Yes

I 16:50:55 Test Mode: No

I 16:50:55 OPC: No

I 16:50:55 BURN-Proof: Enabled

I 16:50:55 Write Speed Successfully Set! - Effective: 5 540 KB/s (4x)

I 16:50:55 Book Type Setting: DVD-ROM

I 16:50:55 User Specified L0 Data Zone Capacity: 1 913 760

I 16:51:04 Set L0 Data Zone Capacity Succeeded!

I 16:51:04 Filling Buffer... (40 MB)

I 16:51:05 Writing LeadIn...

I 16:51:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 16:51:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 16:51:09 Writing Layer 0... (LBA: 0 - 1913759)

I 17:03:05 Writing Layer 1... (LBA: 1913760 - 3827487)

I 17:15:12 Synchronising Cache...

I 17:15:13 Closing Track...

I 17:15:26 Finalising Disc...

W 17:16:25 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - No Seek Complete

W 17:16:25 Finalise Disc Failed! - Reason: No Seek Complete

W 17:16:25 Retrying (1 of 3)...

W 17:16:55 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Write Error

W 17:16:55 Retry Failed - Reason: Write Error

W 17:16:55 Retrying (2 of 3)...

W 17:18:19 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - No Seek Complete

W 17:18:19 Retry Failed - Reason: No Seek Complete

W 17:18:19 Retrying (3 of 3)...

W 17:19:02 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - No Seek Complete

W 17:19:02 Retry Failed - Reason: No Seek Complete

[Cynthia]

tried buring at 2,4 , 2 and 4x speed.

 

I 16:50:55 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x)

Most certainly all those three burns were carried out at 4x, as none of those lower speeds are supported by your system.

 

Try the 6x and 8x and if that also fails, get better quality media.

[hitmansweden]

tried buring at 2,4 , 2 and 4x speed.

 

I 16:50:55 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x)

Most certainly all those three burns were carried out at 4x, as none of those lower speeds are supported by your system.

 

Try the 6x and 8x and if that also fails, get better quality media.

 

thx a lot mate for the answer.

 

I have the option to choose 2, 2.4 or 4x tho...on img burn.

 

i dont think hy disk is dirty, its kinda new,

 

what if i change to verbatim and it still fails?

 

can u see any other option why it fails?

 

its only in the end of the burn that it fails why is that?

 

new media, u mean new disks like verbatim?

Edited February 18, 2011 by hitmansweden

[ianymaty]

Go with a higher speed 6x or 8x, forget about the lower speeds fairytale.

 

If Verbatin don't go, buy a new drive.

[hitmansweden]

Go with a higher speed 6x or 8x, forget about the lower speeds fairytale.

 

If Verbatin don't go, buy a new drive.

 

a new drive? even tho its only a year? imma try burning a new game first.

[Cynthia]

Verbatim works ok with that burner. I have one myself.

 

If you buy the Verbatims on mail order outside of Sweden, you can get them for a price lower than what you paid for your current ones (if they were bought in Sweden).

[ianymaty]

what if i change to verbatim and it still fails?

a new drive? even tho its only a year? imma try burning a new game first.

 

When I said buy a new drive, I just answerd your question.

 

Meaning if you try Verbatim and still fail, replace burner.

 

A drive that can't burn propperly a Verbatim disc it is pretty useles, you know.

[hitmansweden]

what if i change to verbatim and it still fails?

a new drive? even tho its only a year? imma try burning a new game first.

 

When I said buy a new drive, I just answerd your question.

 

Meaning if you try Verbatim and still fail, replace burner.

 

A drive that can't burn propperly a Verbatim disc it is pretty useles, you know.

 

ok so the only thing i need to do is, set layerbreak, speed 4x-8x , verity on? and pic the 1 kbit .dvd file and burn?