FFSAT Posted February 20, 2011 Share Posted February 20, 2011 I just started using imgburn with DVDFab 8.0.7.3 My first burn was successful but now when I try to burn another disk the imgburn stops burning and the speed goes to 0 and stays there. I have not recieved any error messages. I have to click cancel on the DVDfab program to close down the imgburn program. I'm not sure what I have to do to correct this issue. Here is a log file from a burn that I tried today. I also tried this last evening and went to bed and when I got up this morning it was stopped at 33% at 0 speed, with no error. ImgBurn Version 2.5.5.0 - Log ; Saturday, 19 February 2011, 14:17:16 ; \\****************************************// ; ; 14:16:58 ImgBurn Version 2.5.5.0 started! 14:16:58 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) 14:16:58 Total Physical Memory: 3,404,832 KB - Available: 2,440,716 KB 14:16:58 Initialising SPTI... 14:16:58 Searching for SCSI / ATAPI devices... 14:16:58 -> Drive 1 - Info: TSSTcorp DVD+-RW TS-H653F D200 (F:) (ATAPI) 14:16:58 -> Drive 2 - Info: TSSTcorp DVD-ROM TS-H353B D200 (E:) (ATAPI) 14:16:58 Found 1 DVD-ROM and 1 DVD±RW/RAM! 14:17:16 Close Request Acknowledged 14:17:16 Closing Down... 14:17:16 Shutting down SPTI... 14:17:16 ImgBurn closed! Link to comment Share on other sites More sharing options...
scuzzy Posted February 20, 2011 Share Posted February 20, 2011 I just started using imgburn with DVDFab 8.0.7.3 My first burn was successful but now when I try to burn another disk the imgburn stops burning and the speed goes to 0 and stays there. I have not recieved any error messages. I have to click cancel on the DVDfab program to close down the imgburn program. I'm not sure what I have to do to correct this issue. Here is a log file from a burn that I tried today. That log doesn't show any burn operation even starting ... it doesn't look as though ImgBurn has been asked to do anything at all after startup .... maybe a DVDFab error ? Link to comment Share on other sites More sharing options...
ianymaty Posted February 20, 2011 Share Posted February 20, 2011 Update firmware on both your drives writer D400 http://www.firmwarehq.com/Samsung/TS-H653F/files.html reader D700 http://www.firmwarehq.com/Samsung/TS-H353B/files.html Use quality discs from Verbatim. Try different speeds available. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 20, 2011 Share Posted February 20, 2011 Copy + paste the log info from the Log window itself (once you've run into the problem). Link to comment Share on other sites More sharing options...
Cynthia Posted February 20, 2011 Share Posted February 20, 2011 You can find the DVDFab burning log through this thread. http://forum.imgburn.com/index.php?showtopic=14632 Link to comment Share on other sites More sharing options...
FFSAT Posted February 20, 2011 Author Share Posted February 20, 2011 I did try to update my drivers but it said they were already up to date. I also change the write speed to 8x since the DVD-R's that I have are 16x. I did not look in to the log file for DVDfab but I will and then paste it. I also have Verbatim DVD's being shipped this week since I can't find any store around me that sells them. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted February 21, 2011 Share Posted February 21, 2011 He said DRIVES, not DRIVERS. Two totally different things. You were linked to the pages and told the firmware version to update to. Link to comment Share on other sites More sharing options...
FFSAT Posted February 21, 2011 Author Share Posted February 21, 2011 Sorry I added a few more letters than I wanted to. I did download and tried to run those files but it came up that it was for the wrong drive. I will try again and let you know. Link to comment Share on other sites More sharing options...
Recommended Posts