spenser Posted February 22, 2011 Posted February 22, 2011 Hello, I´m trying to burn an .iso file to a Pioneer burner BDR-206 using a Sony BD-RE DL 50 Gb disc. My system is running Windows 7 Ultimate. I´ve tried to do it three times but always I´ve found the same problem. After completing more or less 54% of the task, the burning stops. After a while I receive the following message: - I/O error. Device Pioneer BD-RW BDR-205 1.05 - CDB: AA 00 00 B4 74 00 00 00 00 20 80 00 - Interpretation: Write (12) - Sectors: 11826176-11826207 - Reason : the request could not be performed because of an I/O device error. Even after canceling the task and shutting down ImgBurn the driver light continues on and I cannot eject the disc. To do that I have to reboot the computer. Really I´m at a loss although I´ve some suspicion about the program or the disc having some problem with the layer break. My only reason to think that way is that the program always stops more or less at the site where the break could be located and works normally until it reaches that point. But I confess I´m new at blu-ray burning (actually that was my first attempt)and I could be missing lot of things. This is the log: I 02:38:11 ImgBurn Version 2.5.5.0 started! I 02:38:11 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 02:38:11 Total Physical Memory: 9.427.956 KB - Available: 7.192.640 KB I 02:38:11 Initialising SPTI... I 02:38:11 Searching for SCSI / ATAPI devices... I 02:38:12 -> Drive 1 - Info: PIONEER BD-RW BDR-206 1.05 (E:) (ATAPI) I 02:38:12 -> Drive 2 - Info: PLDS DVDRWBD DH-6E2S 7D12 (F:) (ATAPI) I 02:38:12 -> Drive 3 - Info: ROXIO DVD-ROM EMULATOR 2.00 (H:) (SCSI) I 02:38:12 Found 1 DVD-ROM, 1 BD-ROM/DVD±RW and 1 BD-RE! I 02:38:55 Operation Started! I 02:38:55 Source File: D:\Videos\Europe2010\Travels (2010).iso I 02:38:55 Source File Sectors: 20.382.144 (MODE1/2048) I 02:38:55 Source File Size: 41.742.630.912 bytes I 02:38:55 Source File Volume Identifier: Travels I 02:38:55 Source File Volume Set Identifier: 3E5509FC0136FEFA I 02:38:55 Source File Application Identifier: ImgBurn v2.5.5.0 I 02:38:55 Source File Implementation Identifier: ImgBurn I 02:38:55 Source File File System(s): UDF (2.50) I 02:38:55 Destination Device: [1:0:0] PIONEER BD-RW BDR-206 1.05 (E:) (ATAPI) I 02:38:55 Destination Media Type: BD-RE (Disc ID: MEI-T01-001) (Speeds: 2x) I 02:38:55 Destination Media Sectors: 23.652.352 I 02:38:56 Write Mode: BD I 02:38:56 Write Type: DAO I 02:38:56 Write Speed: MAX I 02:38:56 BD-RE FastWrite: Yes I 02:38:56 Link Size: Auto I 02:38:56 Lock Volume: Yes I 02:38:56 Test Mode: No I 02:38:56 OPC: No I 02:38:56 BURN-Proof: Enabled I 02:38:56 Write Speed Successfully Set! - Effective: 8.990 KB/s (2x) I 02:38:56 Advanced Settings - Optimal Writing Speed: No I 02:38:57 Filling Buffer... (40 MB) I 02:38:57 Writing LeadIn... I 02:39:10 Writing Session 1 of 1... (1 Track, LBA: 0 - 20382143) I 02:39:10 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 20382143) I 02:39:10 Writing Layer 0... (LBA: 0 - 12219391) W 03:28:49 Failed to Write Sectors 11826176 - 11826207 - Reason: The request could not be performed because of an I/O device error. W 03:28:49 Retrying (1 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (2 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (3 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (4 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (5 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (6 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (7 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (8 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (9 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (10 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (11 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (12 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (13 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (14 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (15 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (16 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (17 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (18 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (19 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. W 03:28:58 Retrying (20 of 20)... W 03:28:58 Retry Failed - Reason: The parameter is incorrect. Any help will be very appreciated Thanks in advance
LIGHTNING UK! Posted February 22, 2011 Posted February 22, 2011 Your drivers are causing the problem here. What controller is the drive connected to?
spenser Posted February 23, 2011 Author Posted February 23, 2011 Thanks for your prompt reply ! The drive is connected to a SATA controller, Intel ICH10R SATA AHCI Controller. I´ve looked for a newer drive in Device Manager/Update Driver Software/Search Automatically, but Windows response it´s that the best driver for my device is already installed.
mmalves Posted February 23, 2011 Posted February 23, 2011 Install the latest Intel Rapid Storage Technology driver and try again.
spenser Posted February 23, 2011 Author Posted February 23, 2011 Thanks, I´ll do it and I´ll post the results. But I´m doubtful about something.The link you provided took me to a page with TWO available downloads. In spite there´s a link (What File Should I Download?) that apparently gives a response to my doubts, regretfully that link doesn´t seem to be working. I don´t know if you could make a suggestion but if you can it would be really very helpful because I´m afraid to damage my system if I choose the wrong one.
Cynthia Posted February 23, 2011 Posted February 23, 2011 One of the downloads is in English. If you want the multilingual (you want to see what happens during the installation in French/Chinese/Swahili) select that one instead.
spenser Posted February 23, 2011 Author Posted February 23, 2011 Ooops ! II think I´ll pass the Swahili.
spenser Posted February 23, 2011 Author Posted February 23, 2011 I Installed the Intel Rapid Storage Technology driver and tried again but with the same result. The burning was interrupted exactly at the same place (58% of the task completed; size: 24.220.008.448 bytes. The I/O error message is also exactly the same I don´tnotice any difference with the log, either: I 01:50:20 ImgBurn Version 2.5.5.0 started! I 01:50:20 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7600) I 01:50:20 Total Physical Memory: 9.427.956 KB - Available: 7.311.612 KB I 01:50:20 Initialising SPTI... I 01:50:20 Searching for SCSI / ATAPI devices... I 01:50:20 -> Drive 1 - Info: PIONEER BD-RW BDR-206 1.05 (E:) (ATAPI) I 01:50:20 -> Drive 2 - Info: PLDS DVDRWBD DH-6E2S 7D12 (F:) (ATAPI) I 01:50:20 -> Drive 3 - Info: ROXIO DVD-ROM EMULATOR 2.00 (H:) (SCSI) I 01:50:20 -> Drive 4 - Info: SanDisk Cruzer 8.01 (K:) (USB) I 01:50:20 Found 1 DVD-ROM, 1 BD-ROM/DVD±RW, 1 BD-RE and 1 Unknown! I 01:52:38 Operation Started! I 01:52:38 Building Image Tree... W 01:52:39 Skipped Hidden File: D:\Videos\Movies\Travels\BD\BDMV\STREAM\Thumbs.db I 01:52:44 Corrected file system selection for Blu-ray Video disc. I 01:52:44 Corrected UDF revision selection for Blu-ray Video disc. I 01:52:54 Calculating Totals... I 01:52:54 Preparing Image... I 01:52:54 Contents: 536 Files, 46 Folders I 01:52:54 Content Type: BD Video I 01:52:54 Data Type: MODE1/2048 I 01:52:54 File System(s): UDF (2.50) I 01:52:54 Volume Label: BD I 01:52:54 Size: 41.738.424.667 bytes I 01:52:54 Sectors: 20.380.442 I 01:52:54 Image Size: 41.742.630.912 bytes I 01:52:54 Image Sectors: 20.382.144 I 01:52:56 Operation Successfully Completed! - Duration: 00:00:18 I 01:52:57 Operation Started! I 01:52:57 Source File: -==/\/[bUILD IMAGE]\/\==- I 01:52:57 Source File Sectors: 20.382.144 (MODE1/2048) I 01:52:57 Source File Size: 41.742.630.912 bytes I 01:52:57 Source File Volume Identifier: BD I 01:52:57 Source File Volume Set Identifier: 3E570E930136FEFA I 01:52:57 Source File Application Identifier: ImgBurn v2.5.5.0 I 01:52:57 Source File Implementation Identifier: ImgBurn I 01:52:57 Source File File System(s): UDF (2.50) I 01:52:57 Destination Device: [1:0:0] PIONEER BD-RW BDR-206 1.05 (E:) (ATAPI) I 01:52:57 Destination Media Type: BD-RE (Disc ID: MEI-T01-001) (Speeds: 2x) I 01:52:57 Destination Media Sectors: 23.652.352 I 01:52:57 Write Mode: BD I 01:52:57 Write Type: DAO I 01:52:57 Write Speed: MAX I 01:52:57 BD-RE FastWrite: Yes I 01:52:57 Link Size: Auto I 01:52:57 Lock Volume: Yes I 01:52:57 Test Mode: No I 01:52:57 OPC: No I 01:52:57 BURN-Proof: Enabled I 01:52:57 Write Speed Successfully Set! - Effective: 8.990 KB/s (2x) I 01:52:57 Advanced Settings - Optimal Writing Speed: No I 01:52:58 Filling Buffer... (40 MB) I 01:53:00 Writing LeadIn... I 01:53:10 Writing Session 1 of 1... (1 Track, LBA: 0 - 20382143) I 01:53:10 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 20382143) I 01:53:10 Writing Layer 0... (LBA: 0 - 12219391) W 01:54:12 Device Removal Detected! W 01:54:12 The device list will be refreshed at the next available opportunity. W 02:43:39 Failed to Write Sectors 11826176 - 11826207 - Reason: The request could not be performed because of an I/O device error. W 02:43:39 Retrying (1 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (2 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (3 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (4 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (5 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (6 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (7 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (8 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (9 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (10 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (11 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (12 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (13 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (14 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (15 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (16 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (17 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (18 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (19 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 02:43:49 Retrying (20 of 20)... W 02:43:49 Retry Failed - Reason: The parameter is incorrect. W 04:24:42 Retrying (21)... W 04:24:42 Retry Failed - Reason: The parameter is incorrect.
spenser Posted February 25, 2011 Author Posted February 25, 2011 Well, after repeated failures I´ve decided to try something different. I tried to burn an smaller iso file (less than 25 Gb) on the same Verbatim BD-RE DL that I´ve used before. The burning failed but the important fact it that it stopped at exactly the same point that had stopped the previous re4cordings. In other words:_ in all the cases the burning stopped after writing 11826176 sectors or 24.220.008.448 bytes. I guess that means something (problems when it bagins to write the second layer ?) but regretfully my knowledge about BD burning is almost nil. Could someone please give some idea ? I would really appreciate it. This is the new log: I 22:07:20 ImgBurn Version 2.5.5.0 started! I 22:07:20 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 22:07:20 Total Physical Memory: 9.427.956 KB - Available: 6.541.968 KB I 22:07:20 Initialising SPTI... I 22:07:20 Searching for SCSI / ATAPI devices... I 22:07:21 -> Drive 1 - Info: PIONEER BD-RW BDR-206 1.05 (E:) (ATAPI) I 22:07:21 -> Drive 2 - Info: PLDS DVDRWBD DH-6E2S 7D12 (F:) (ATAPI) I 22:07:21 -> Drive 3 - Info: ROXIO DVD-ROM EMULATOR 2.00 (H:) (SCSI) I 22:07:21 -> Drive 4 - Info: SanDisk Cruzer 8.01 (K:) (USB) I 22:07:21 Found 1 DVD-ROM, 1 BD-ROM/DVD±RW, 1 BD-RE and 1 Unknown! I 22:07:40 Operation Started! I 22:07:40 Source File: D:\Videos\Movies\Campeones\Campeones (2008).iso I 22:07:40 Source File Sectors: 12.023.040 (MODE1/2048) I 22:07:40 Source File Size: 24.623.185.920 bytes I 22:07:40 Source File Volume Identifier: _Campeones I 22:07:40 Source File Volume Set Identifier: 3D8B723400B773EC I 22:07:40 Source File Application Identifier: ImgBurn v2.5.3.0 I 22:07:40 Source File Implementation Identifier: ImgBurn I 22:07:40 Source File File System(s): UDF (2.50) I 22:07:40 Destination Device: [1:0:0] PIONEER BD-RW BDR-206 1.05 (E:) (ATAPI) I 22:07:40 Destination Media Type: BD-RE (Disc ID: MEI-T01-001) (Speeds: 2x) I 22:07:40 Destination Media Sectors: 23.652.352 I 22:07:40 Write Mode: BD I 22:07:40 Write Type: DAO I 22:07:40 Write Speed: MAX I 22:07:40 BD-RE FastWrite: Yes I 22:07:40 Link Size: Auto I 22:07:40 Lock Volume: Yes I 22:07:40 Test Mode: No I 22:07:40 OPC: No I 22:07:40 BURN-Proof: Enabled I 22:07:40 Write Speed Successfully Set! - Effective: 8.990 KB/s (2x) I 22:07:40 Advanced Settings - Optimal Writing Speed: No I 22:07:41 Filling Buffer... (40 MB) I 22:07:41 Writing LeadIn... I 22:07:51 Writing Session 1 of 1... (1 Track, LBA: 0 - 12023039) I 22:07:51 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12023039) W 22:58:41 Failed to Write Sectors 11826176 - 11826207 - Reason: The request could not be performed because of an I/O device error. W 22:58:41 Retrying (1 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (2 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (3 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (4 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (5 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (6 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (7 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (8 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (9 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (10 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (11 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (12 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (13 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (14 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (15 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (16 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (17 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (18 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (19 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. W 22:58:51 Retrying (20 of 20)... W 22:58:51 Retry Failed - Reason: The parameter is incorrect. E 22:58:56 Failed to Write Sectors 11826176 - 11826207 - Reason: The request could not be performed because of an I/O device error. I 22:58:56 Synchronising Cache... W 22:58:56 Synchronise Cache Failed! - Reason: The parameter is incorrect. W 22:58:56 Retrying (1 of 3)... W 22:58:56 Retry Failed - Reason: The parameter is incorrect. W 22:58:56 Retrying (2 of 3)... W 22:58:56 Retry Failed - Reason: The parameter is incorrect. W 22:58:56 Retrying (3 of 3)... W 22:58:56 Retry Failed - Reason: The parameter is incorrect. W 22:59:06 User opted to skip the 'Close Track/Session/Disc' functions. E 22:59:06 Failed to Write Image! I 22:59:06 Exporting Graph Data... I 22:59:06 Graph Data File: C:\Users\JMF\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_BD-RW_BDR-206_1.05_24-FEBRUARY-2011_22-07_MEI-T01-001_MAX.ibg I 22:59:06 Export Successfully Completed! E 22:59:06 Operation Failed! - Duration: 00:51:26 I 22:59:06 Average Write Rate: 7.719 KB/s (1.7x) - Maximum Write Rate: 9.043 KB/s (2.0x)
spenser Posted March 5, 2011 Author Posted March 5, 2011 (edited) Just in case someone find a problem like mine, and trying to be helpful, here is the situation so far: 1. I´ve no problems burning BD-R 25 Gb. Previously I thought I had, but it was a video player software problem. The disc was right. 2. The problem arises when trying to burn double layers BD-RE 3. The failure always occur at the same point (58% of the task completed; size: 24.220.008.448 bytes) 4. Roxio software also fails to fulfill the task. So ImgBurn is not to be blamed. 5. I´ve the latest drivers and firmware installed 6. Previous to the burning I can play the blu-ray folder and files on my computer. So, the input is right. 7. The failures always happened using BD-RE DL media. I´ll buy some BD-R DL to see what happens -that´s becoming expensive!- 8. At that point I´m almost absolutely sure that´s a layer break point problem. I haven´t the slightest idea about how to fix it but I´ll continue trying to find out. Edited March 5, 2011 by spenser
LIGHTNING UK! Posted March 5, 2011 Posted March 5, 2011 None of the errors you're getting are from the drive itself so your problem still lies with the controller / drivers. Are you 100% it's on the Intel controller and not a 3rd party (e.g. JMicron) one? Do you even have such a controller? If you do, try the drive on that instead. Do you have the option in your motherboard BIOS to disable RAID/AHCI mode and just use standard ATA for the controller?
spenser Posted March 6, 2011 Author Posted March 6, 2011 (edited) Thanks for your help No option in the BIOS to disable both of them. It´s RAID or AHCI. According to the Control Panel info I´ve an IDE ATA/ATAPI Intel controller and a IEEE 1394 Host Controller JMicron. If I understand correctly you´re saying that if the BD drive is connected to the Firewire controller I ought to switch it to the Intel controller ? Please forgive my question but my knowledge on this matter is limited as surely you´ll have realized. By the way, today I tried to burn the same input to the same BD-RW DL media using Nero Burning ROM. No failure, no error message, the task was completed successfully. I can watch the video. But if I switch to an scene more or less close to the end of the video after one or two seconds the image freezes and I cannot go on. Edited March 6, 2011 by spenser
LIGHTNING UK! Posted March 6, 2011 Posted March 6, 2011 Any chance you could load up Device Manager, expand the 'IDE ATA/ATAPI Controllers' branch and the 'Storage Controllers' branch (ensuring they're both visible at the same time) and take a screenshot? Do you know what motherboard you've got? There are probably some make / model / version details written on it if you whip the side of the case off.
spenser Posted March 6, 2011 Author Posted March 6, 2011 Attached the requested information. Thanks for your help !
spenser Posted March 12, 2011 Author Posted March 12, 2011 Hi, I don´t want to become a nuisance but I´haven´t found any help outside this Forum. First of all I would like to know if Lightning UK´s request for screenshots is fulfilled. In case I missed something please let me know and I´ll post it. I also want to tell about as new development. Today ImgBurn failed to burn a DVD9 disc. That´s a first time because before the problems only arose when using BD 50 Gb media. Until today I had no problems burning ISO's to BD25, DVD9 or DVD4. But the error message is very similar to the previous one. So I think that maybe someone could find some clue about what´s happening. Here´s the log: I 12:50:03 Operation Started! I 12:50:03 Source File: C:\Users\JMF\Media Download\JDownloader\Good Morning Vietnam 1987\Good Morning Vietnam.mds I 12:50:03 Source File Sectors: 3.908.224 (MODE1/2048) I 12:50:03 Source File Size: 8.004.042.752 bytes I 12:50:03 Source File Volume Identifier: Good Morning Vietnam I 12:50:03 Source File Volume Set Identifier: 3E6C6057003BA27F I 12:50:03 Source File Application Identifier: IMGBURN V2.5.5.0 - THE ULTIMATE IMAGE BURNER! I 12:50:03 Source File Implementation Identifier: ImgBurn I 12:50:03 Source File File System(s): ISO9660; UDF (1.02) I 12:50:03 Destination Device: [1:1:0] PLDS DVDRWBD DH-6E2S 7D12 (F:) (ATAPI) I 12:50:03 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 4x) I 12:50:03 Destination Media Sectors: 4.173.824 I 12:50:03 Write Mode: DVD I 12:50:03 Write Type: DAO I 12:50:03 Write Speed: MAX I 12:50:03 Link Size: Auto I 12:50:03 Lock Volume: Yes I 12:50:03 Test Mode: No I 12:50:03 OPC: No I 12:50:03 BURN-Proof: Enabled I 12:50:03 Write Speed Successfully Set! - Effective: 5.540 KB/s (4x) I 12:50:03 Optimal L0 Data Zone Capacity: 1.965.904 I 12:50:03 Optimal L0 Data Zone Method: Copied From Original Disc I 12:50:22 Set L0 Data Zone Capacity Succeeded! I 12:50:22 Filling Buffer... (40 MB) I 12:50:23 Writing LeadIn... I 12:50:24 Writing Session 1 of 1... (1 Track, LBA: 0 - 3908223) I 12:50:24 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3908223) I 12:50:24 Writing Layer 0... (LBA: 0 - 1965903) W 12:56:05 Failed to Write Sectors 91712 - 91743 - Reason: The request could not be performed because of an I/O device error. W 12:56:05 Retrying (1 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (2 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (3 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (4 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (5 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (6 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (7 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (8 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (9 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (10 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (11 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (12 of 20)... W 12:56:25 Retry Failed - Reason: Invalid Address For Write W 12:56:25 Retrying (13 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (14 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (15 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (16 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (17 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (18 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (19 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:56:26 Retrying (20 of 20)... W 12:56:26 Retry Failed - Reason: Invalid Address For Write W 12:57:18 Retrying (21)... W 12:57:18 Retry Failed - Reason: Invalid Address For Write E 12:57:24 Failed to Write Sectors 91712 - 91743 - Reason: The request could not be performed because of an I/O device error. E 12:57:24 Next Writable Address: 91096 I 12:57:24 Synchronising Cache... W 12:57:29 User opted to skip the 'Close Track/Session/Disc' functions. E 12:57:29 Failed to Write Image! I 12:57:29 Exporting Graph Data... I 12:57:30 Graph Data File: C:\Users\JMF\AppData\Roaming\ImgBurn\Graph Data Files\PLDS_DVDRWBD_DH-6E2S_7D12_12-MARCH-2011_12-50_MKM-001-00_MAX.ibg I 12:57:30 Export Successfully Completed! E 12:57:30 Operation Failed! - Duration: 00:07:26 I 12:57:30 Average Write Rate: 436 KB/s (0.3x) - Maximum Write Rate: 5.577 KB/s (4.0x) Any feedback will be highly appreciated
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now